What makes an aquarium great? That depends on what you hope to get out of it. As with everything else in life, different people prefer different things. I don't necessarily believe that an aquarium must appear completely "natural"; devoid of any "out-of-place" ornamentation. Unfortunately, many people in the aquarium hobby have become "Fish Snobs", who look down on beginners or others who prefer, say, blue colored gravel and porcelain mermaids to a more natural looking planted aquarium. Likewise, many reef keeping hobbyists look down on those who keep freshwater setups. I can remember fondly my first aquarium, a ten gallon tank, with no cover, an outside air-powered box filter, blue and green gravel, a three dimensional ocean scene background and a porcelain octopus. I couldn't afford a heater (they were pricier back then) so I just kept cold water species like goldfish. Since then, my tastes in aquarium decor have changed, but at the time, that tank was right for me. The fanciful decorations fired my imagination and increased my interest in the hobby.
Beauty is truly in the eye of the beholder. If you are able to
design beautiful and functional aquariums that are purely fanciful,
that is great. But if you are interested in creating breathtaking
aquariums that are based on nature's beauty, then here are some
useful suggestions. This is not an article on how to set up an
aquarium for the beginner, but a collection of creative techniques
and ideas to make an aquarium that is something special and truly
spectacular.
The first thing to consider should be the tank itself. First you
must decide how big you want the tank to be, and then you must decide
upon a shape. The general rule is that bigger is better because it
allows more room for error, but small tanks have benifits as well;
especially at cleaning time. When it comes to shape, there are trade
offs also. A tall, narrow tank looks very dramatic. But a low, wide
tank has better gas exchange at the surface, and also allows more
light to penetrate to the bottom of the tank for the plants (or
corals, etc. for a reef tank). Based on this information, you
should be able to decide what size and shape you need. The size and
shape will determine how many, what type, and what size fish and
plants may be used. It also helps you choose whether to use live
plants. Live plants require good light penetration, but don't
require the surface area for gas exchange like fish do, especially
if CO2 is added via diffusion. In this case, you want to
minimize the gas exchange or you will drive out the CO2.
A filter that stirs the surface or causes splashing or turbulence
should be avoided in this case. The fish will get the oxygen they
require from the action of the plants' photosynthesis. Before moving
on to the substrate, you should know what kind of tank you will set
up (ie., salt, brackish, soft fresh, hard fresh, plants or not, etc.)
See the link "Salt vs. Fresh".
Positioning rocks, driftwood, and plants is an essentail part of
aquarium design. Just like any other art form, proper placement can
change the layout from boring to exciting. Try to position
highlights off-center, create depth by placing larger and smaller
objects at angles, and try leaning rocks and driftwood at angles
rather than placing them in horizontal or verticle positions.
The aquarium substrate serves several purposes. Sand or gravel helps to hold the plants in place and if fertilized provides a medium from which they obtain nutrients. If an undergravel filter is used, it provides a home for beneficial bacteria. Many fish need a soft substrate to dig about in search of food or to hide in. But one of the main reasons for having a substrate is to decorate the bottom of the tank. Most aquarium gravels are graded, meaning they are of similiar size and shape. In nature, this is less often the case. True, there are sandy beaches, etc., but in most cases the substrate consists of various-sized particles. To acheive a natural effect, try to find an ungraded quartz or granite sand. Rinsing will help remove most of the silt, but don't worry if you can't get it all out. It will settle in a few days. A very fine sand can also be used for a natural effect, and is useful in planted aquariums where substrate additives are used because it slows their release into the water column, and the fine sand facilitates the growth of roots. If an undergavel filter is used, it is recommended that the graded gravel be used, so these guidelines are only for tanks without an undergravel filter.
For great results, try finding rocks of a similar color and type as the
substrate and use these for decorating. I have achieved beautiful
effects by crushing large rocks into many different sizes, or for
smooth rocks simply collecting several different sizes, and
scattering them among the gravel.
Backgrounds can be a tricky topic. Some backgrounds may
photograph nicely, but don't look very convincing in life. That is
because of their two-dimensional quality. I prefer solid colored or
graded colored backgrounds with no details because of this. A
detailed background draws the eye's focus, and this enhances its
two-dimensional effect. A solid color is less obvious, and allows
the focus to remain on the interior of the aquarium. Some good
colors to achieve dramatics effects are:
If you prefer a detailed background, consider building a shadow
box. Simply construct a box with one side open toward the aquarium.
Arrange rocks, wood, leaves, plastic plants, etc. like a diarama
behind the aquarium. Of course, many people use slate or cork tiles for a
background, but that still has a somewhat artificial quality to it.
As mentioned earlier, it greatly improves the natural image of an aquarium if the rocks can be made to compliment the gravel. They should be a similar color if possible, although there are times when the rocks can be very dramatic if af a very different color from the gravel. Also, sharp-edged rock and gravel look better together, as do rounded rocks with rounded gravel. Again, try to get a variety of different sizes, but try to limit the types of rock to only one type. Of course these are just guidelines, not rules, but usually this creates a more natural look.
Rocks are hard, and give a hard appearance. In oriental gardening
and miniature chinese gardening (penjing) they are considered the
"skeleton", and the plants and wood are used to flesh out the scene.
See the link "Penjing and Suiseki". The
amount of rocks used verses plants will give your tank it's unique
character. In some instances, rocks are out of place altogether;
the same is true for gravel or plants.
A dead piece of wood can be one of the most beautiful things found in nature. It's texture and form suggests many things. Twisted, knotted wood gives a feeling of growth through adversity, and upward grasping branches symbolize power and strength. Likewise, roots grasping into the sand gives a feeling of security and foundation. Beyond that, it also lends a very natural impression to an aquarium. Wood is great for creating artistic angles, structures, shapes and forms. The greatest feature of wood in the aquarium, however, is also the greatest flaw. Each piece is unique. This is great because it gives the aquarium a unique character. The downside is that aquarium suitable wood can be hard to find in some areas, and mail-ordering doesn't allow you to pre-view it. If you find a shop that stocks a variety of aquarium suitable wood, then you should consider that a valuable resource. This way you can browse for the piece that is just right for your tank instead of settling for whatever is shipped to you.
If your desire is to create a natural looking tank, avoid wood
that has been hand-carved with holes, etc. These usually do not
really look very natural. I prefer branching pieces for best effect.
If you point the branches downwards into the sand, it will simulate
a root branching into the water. If you point them upwards, try to
keep them at an angle. This gives a more relaxed feel, and looks
like an old, drowned tree branch. In an aquarium with rocks, wood,
as well as plants, can help lend a softer look to the tank.
Aquarium plants are a very large topic, and I could easily write an entire book on them. But I will try to just touch on some of the better highlights that I have found make them extremely versatile and useful in decorating the aquarium.
Color, size, form (shape), and texture are the basics of any design. Aquarium plants are great because they have so many variations of all of those themes. This allows much room for creativity in planting an aquarium. Color can be used most effectively by planting bright colored plants in front of darker ones, or reddish ones amongst several green ones. This adds depth and dimension to the tank and breaks up monotony. Likewise, large leaved plants provide contrast to smaller ones, and long ones accent round ones. Pinnate leaves like Cabomba look beautiful next to solid Nymphea leaves.
If you are going for a truly natural look you should limit the number of plant species used. Try one or two small ground covers with one or two tall background plants. Use another type if you wish for a centerpiece-type plant, and your aquarium will not look like a jungle of various plants. Unless your plants are kept trimmed very neatly and formally, it is easy to lose continuity with a large variety of types. The same is true of the fish, rocks, and other elements of the aquarium.
Here are a few of my favorite plants and the ways I like to use
them in an aquarium:
Hygrophila difformis; "Water Wisteria"
I like this plant for it's bright green, elegant frond-like
leaves, as well as the way it quickly fills in an area with lush,
dense growth. If you want an aquarium to look established in a
hurry, plant a few stems of H. difformis in the corners, add
some iron fertilizer and CO2 and look out! Within a few months
you'll be trading cuttings in for credit at your local fish store.
Hygrophila stricta;
Like H. difformis, with neat, lanceolate leaves. A
handsome species, it doesn't quite "fill in" an area like H.
difformis. This plant looks good in the back or middle areas of
the aquarium.
Cabomba caroliniana; "Green Cabomba"
Cabomba is a very elegant stemmed plant. It lends a very soft
feeling to the tank. It loves CO2, and can grow rapidly if enough
is available. It is sometimes prone to die-offs seasonally. Use
this plant in the back of the tank, as it grows tall. If it gets
too tall, pinch the top off and stick it into the substrate; it will
root and take hold there. The bottom portion will grow new tops and
actually becomes thicker.
Anubias barteri var. nana; "Dwarf Anubias"
In an aquarium with many rocky crevices, this plant is extremely
useful. Tuck cuttings between stones, in holes on driftwood, or
into any other nook or cranny. It's roots do not require a
substrate, but will attach themselves to any foothold. It is not
very fast growing, but it is not light demanding and is very hardy.
A good low growing plant for shaded areas of the tank, it's heart
shaped leaves and tangled roots branch from a thick rhizome, and
give the impression of a tropical vine. As long as the environment
remains moist, anubias may be grown terrestrially as well, making it
useful in a paludarium.
Microsorium pteropus; "Java Fern"
Like Dwarf Anubias, this plant grows both in water and above
water. It also shares Anubias' epiphytic
tendancies (grows well on rocks and wood). This plant's versatility,
durability, and beauty have made it very popular. Requiring little
light, fertilizer, or upkeep, this true fern will wrap it's roots
tightly onto any object it is attached to. It may be divided at the
rhizome, or the adventitious plantlets which grow at the leaves'
edges may be removed and planted seperately. It adapts well to
virtually any water type except salt water and is not a favorite
among most plant eating fish.
Echinodorus tenellus; "Pygmy Chain Swordplant"
Given adequate light, CO2, iron, and other essentials, this plant
will send out runners and will elegantly fill in a foreground with
bright green, grass-like foliage. Ground cover plants are always
useful, and where I live they can be hard to come by.