Materials: |
Equipment |
| 3" external diameter x 24" PVC pipe |
Drill with bit the size of the air nossle |
| 4" X 27 1/2" PVC pipe |
Grinder to smoothe and groove PVC pipe |
| 3" trap (must fit over the 3" PVC pipe) |
Saw to cut PVC and Wood |
| 3" tiolet flange (must fit over the 3" PVC pipe) |
|
| 4" connecter (must fit over the 4" PVC pipe) |
|
| 4" cap (must fit over the 4" PVC pipe) |
|
| 2 1/2" rubber ball |
|
| 1/4" air nossle |
|
| 1 board 7" X 8" X 1/2" with a 4" diameter hole in the middle |
|
| 1 board 12" X 12" X 1/2" |
|
| 4 Nuts and Bolts to attatch Flange to 12" X 12" Board |
|
Directions: |
Use Plumbers glue for all "attatchments" |
| 1. drill hole in center of cap. |
 |
| 2. Attatch air nossle securely |
|
| 3. Grind Groove for "O" Ring |
 |
| 4. Attatch Trap to end of 3" X 24" pipe |
 |
| 5. Attatch Sleeve, 7" X 8" board and Cap with nossell to 4" pipe |
 |
| 6. Attatch 3" Toilet Flange to bottom of 3" PVC Pipe |
Grind / Sand as needed to fit |
| Bolt Flange to 12" X 12" Board |
|
| Place Rubber Ball on trap |
 |
| Place 4" PVC assembly over 3" PVC assembly |
Grind / Sand to fit |
| Your pump is finished! |
 |
