Sim2 - Products - Projection - SMV 290




SMV 290: the cubic monitor.
The Seleco 28” videowall monitor SMV 290 is a versatile and robust video display. It is characterised by its rugged metal cubic case, which is easily stackable up to a maximum of 12 monitors. The Black Matrix FST tube guarantees excellent performances in terms of convergence, purity and contrast, which results in a monitor particularly suitable for videowall applications. Due to the stylish cabinet, the SMV 290 can also be used as a stand alone video display. The Seleco videowall monitors assure a bright and sharp picture with excellent color balance, they are easy to move being provided with carrying handles and easy to maintain as well.


SMV 290
PICTURE TUBE
Crt: 28” selected CRT (71 cm diagonal), flat square (FST), black matrix
Dot pitch: 0.8 mm
ELECTRONICS
Color system: NTSC
RGB bandwidth: 7 MHz ± 3dB
Horizontal scan frequency: 15750 Hz ± 800Hz
Vertical scan frequency: 50-60 Hz autolock
Cut off: automatic
Colour temperature: 6500 °K (normal) with 3200°K internally switched
Test pattern: built in cross hatch generator
INPUT / OUTPUT
  video input via BNC and SCART
  analog RGB input via Canon DB9-sub and SCART
  TTL RGB input via Canon D9-sub
  video output via BNC and SCART
CONTROLS
  Brightness; Contrast; Color Saturation;
Preset for Brightness; Contrast; Color Saturation; amplitude H and V, shift H and V, trapezium, E-W and vertical linearity; Horizontal phase (TTL in).
Switches:
priority CVBS/RGB; Analogue RGB/TTL RGB; sync POS/NEG; 75 Ohm termination ON/OFF
GENERAL
Degaussing: Automatic on switch on of the monitor (also possible during operation using the degaussing switch)
Switch on: 3 to 7 second random delay (for video wall)
Input Voltage: 110 V; 60 Hz with loop through power supply
Power consumption: 85 watts
Dimensions (WxHxD): 594 x 469 x 505 mm
(23.5”x18.5”x 20”)
Weight: 42 Kg (92 lbs)