| PROJECTION |
| CRT: |
3 x 07MS 7“ high brightness, high resolution CRT‘s,
liquid cooled, air coupling, average life more than 10.000 hrs |
| Lenses: |
3 HD 6 high definition fully colour corrected by multilayer
coating, high resolution, 135 mm focal length. F number f/1.03, focus adjustments for the
centre and borders; optical resolution more than10 lp/mm at 50% MTF |
| Brightnesst: |
145 ANSI lumens (950 lumens at white peak) |
| Picture size: |
60“-250“ diagonal screen width; 122 cm-508 cm |
| Installation: |
rear or front projection; either floor or ceiling mounted (ceiling
braket supplied) |
| ELECTRONICS |
| Horizontal scan frequency: |
15-16 KHz and 30-38 KHz autolock (VGA and S-VGA compatible) |
| Vertical scan frequency: |
40-130 Hz autolock |
| Bandwidth: |
20 MHz |
| Dynamic focus: |
horizontal and vertical |
| Resolution: |
more than 1000 TV lines with RGB video input; 800 x 600 pixels with
S-VGA input |
| Colour temperature: |
3200° K, 6500° K, 9300° K, plus one user choice selectable and
adjustable by remote control |
| Colour system: |
quad standard (PAL, SECAM, NTSC 4.43 and 3.58) |
| Convergence type: |
digital convergence with 17 adjustments made by remote control |
| Cut-Off: |
automatic to improve the colour temperature stability |
| Keystone: |
adjustable trapezium correction with a maximum of 20° |
| Masking: |
horizontal and vertical masking adjustable by remote control |
| Test pattern: |
8 internal test patterns |
| INPUTS/OUTPUTS |
| RGB Input 1: |
via 5 x BNC (R, G, B, H/V, V) |
| RGB Input 2: |
via SCART |
| YCrCb input: |
via 3 x BNC |
| VGA input: |
via D-sub 15 pin |
| Video Input 1: |
via BNC or via SCART |
| Video Input 2: |
via BNC |
| S-VHS input 1: |
via mini DIN 4-pin |
| S-VHS input 2: |
via SCART |
| Video output: |
via BNC |
| RS 422 Serial interface: |
via DB 9 connector |
| Output voltage: |
2 different power jacks with 12 Volt DC, 10 mA max output power
supply: one is active only when the projector is ON, the other one is active only when a
16:9 or wide image format is selected |
| GENERAL |
| Information: |
On Screen Display by Remote Control |
| Input voltage: |
90-270 Vac 48-62 Hz with Power Factor Corrector |
| Power consumption: |
220 Watt max |
| Stand-by consumption: |
6 Watt |
| Dimensions (WxHxD): |
620 x 290 x 700 mm
(24“ x 11“ x 27“) |
| Packaging dimensions (WxHxD): |
800 x 490 x 880 mm (31“ x 19“ x 34“) |
| Net weight: |
35 Kg (77 lbs) |
| Operative function conditions: |
temperature between 0°C and 40°C, relative humidity from 0% to
90% not condensed |
