Tools  and supplies you will need for Tuneups:

Small, flat screwdriver Hobby Knife
Small, phillips screwdriver Set of needle files
Needle Nose pliers Soldering Iron, flux, and solder (Tix low temp solder recommended for soldering wire to motors)
#24 ga or smaller stranded wire (phone wire)  A-line sells a very flexible wire that is excellent for this purpose .015" brass wire
Silicone adhesive or Liquid Nails for small projects Plastic compatible white grease w/Teflon (such as LaBelle #106 Grease w/ Teflon)
Plastic compatible medium weight needle applicator oil (such as LaBelle #108 Plastic Compatible oil) Sand paper (600 grit and 1000 Grit)
Dental Pick Aero Products Conducta Brush lubricant (for open frame motors)
.005" or .010" Styrene sheet Electrical tape

Parts for the Quick and Easy Tuneup

Part

Manufacturer Part Number
Thrust Washers (.005" pk 10) NWSL 1004
Thrust Washers (.010" pk 10) NWSL 1034
Strip header(Male) (1x36) 3M DigiKey# 929834-02-36-ND
Strip Socket(Female) (2x36) 3M DigiKey# 929975-01-36-ND
Universal Driveline Couplers -- (recommended for long wheelbase locos like SD40-2) NWSL 4816
-OR-    
Universal Coupling Assortment A-Line 12030
     
*Brush Spring (36) Athearn 84014
*Motor brushes (24) Athearn 90037
*Motor Bearings (6) Athearn 90043
     

*Many Parts here are not required.  I have listed them in case you lose something or need to replace a broken or Defective part.


Parts for the Complete Overhaul

Part

Manufacturer Part Number
Remotoring Kit or Motor and Flywheels see chart see chart
Nickle Silver Wheelsets see chart see chart
     
     
     
     
Thrust Washers (.005" pk 10) NWSL 1004
Thrust Washers (.010" pk 10) NWSL 1034
Strip header(Male) (1x36) 3M DigiKey# 929834-02-36-ND
Strip Socket(Female) (2x36) 3M DigiKey# 929975-01-36-ND
Universal Driveline Couplers -- (recommended for long wheelbase locos like SD40-2) NWSL 4816
-OR-    
Universal Coupling Assortment A-Line 12030
*Motor Bearings (6) Athearn 90043