Checkout new products from great  water system manufacturers.

A.O. Smith Water Products Co.    Energy Saver Electric Water Heater

features: Thick foam insulation *  Glass- lined tank * Anode * Thermostat/ high limits provides sensitive temperature control and overheat protection* Electric Elements- zinc plated , copper sheath, screw-in-type, Non- metallic boiler type drain valve

Energy Saver Models

Available Models	Gallons Capacity	Wattage	Height (A)	Diameter (B)	Approx. Shipping Weight
ELJF 6	6	2.5	15-1/2"	15-1/4"	35 lbs.
ELSF 10	10	2.5	18    "	18     "	51 lbs.
ELJF 15	15	3.5	32-1/2"	14-1/4"	58 lbs.
ELJF 20	20	4.5	32-1/4"	18     "	73 lbs.
EEST-30D	30	4.5/ 4.5	34-1/2"	20-1/2"	94 lbs.
EEST-40D	40	4.5/ 4.5	44      "	20-1/2"	115 lbs.
EES - 52D	50	4.5/4.5	53-3/4"	20-1/2"	123 lbs.
EEST- 66D	66	6.0/ 6.0	59-3/4"	21-3/4"	172 lbs.
EEST- 80D	80	6.0/ 6.0	58-1/4"	24      "	206 lbs.
EES - 120D	120	6.0/ 6.0	61-3/4"	29-1/2"	336 lbs.

240 V 2,500 W 3,000 W 4,500 W 6,000 W

AMPS 10.4 12.5 18.8 25.0

EWH-10 COMPACT MODEL

Features: - Masterful design, user friendly   fashion, unique. - Small in size, easy to   operate. - Highly efficient heating    element - glass- lined tank, longer life    time and safer - high tamperature and    pressure protection - temperature adjustment   setting, more convenient to    use

Storage Capacity (L)	10
Element Wattage/ Voltage/ Hz	1500 W/ ~220/ 50 or 60
Temperature range (oC)	35 ~ 75
Depth (mm)	362
Width (mm)	285
Height (mm)	405
Rating Water Pressure (Mpa)	0.8
Gross Weight (kg)	7

easy open  self-closing door   for quick access to pilot light and ease of inspection

Features: *foam insulation, anodic protection, energy saver thermostat- safety shut-off provided, draft diverter, non-linting energy-saving pilot*

A.O. Smith EMGL LPG Water Heater
			Features: * thick foam insulation * glass-lined water tank with anode protection * high efficiency multi-port burner * thermostat with adjustable temperature setting * equipped with drain valve, temperature and pressure relief valve * electronic ignition model without standing pilot. * on/off toggle switch and burner operation indicator light * thermostat with resettable high limit LPG Heaters Guaranteed to save you money !!! ELectrical Requirements: 220 v, 60 Hz, 40 watts
Model	BTU	Vent SIze	Height (in.)	Diameter (in.)		Weight (Lbs.)
EMGL30	36,000	3"	54 1/2	18		114
EMGL50	36,000	3"	56 1/2	20 1/4		153
EMGL100	67,500	4"	68 1/2	26 1/2		352

Instantaneous LPG Heater
			Instantaneous LPG Heater Tank- less Durable Copper Heat Exchanger Automatic operation is controlled by IC module. Water is heated once demand valve is opened. Burner operation ceases once water valve is closed. Safety Features: 1. Flame out protection device stops gas flow 2. Overheat protection with auto reset 3. Dry combustion protection with auto reset 4. Pressure relief valve 5. Water flow stabilizer 6. Lightning Arrester for 220 volts power model.
Desired Temperature is modulated by adjusting gas and water flow controls.
Minimum water inlet pressure: 3 PSI				Maximum gas pressure: 1/2 PSI
Model		Hot Water Output (liters per minute)		LPG Input	Water Inlet/ Outlet	Dimension L x W x H (mm)	Electric Characteristics
JSYS6.5		6.5		46 MJ	1/2 inch	508 x 295 x 160	DC 1.5 x 2
JSYD- 9		9		69 MJ	1/2 inch	630 x 340 x 163	220 V; 60 Hz; 20 watts

Provides 82% Thermal  Efficiency* Plus Famous Burkay Reliability

Quality Features: 1. All non-ferous waterways    Unit is rust-proof because water comes in contact with nothing but copper, brass or bronze. 2. Burkay burner maximizes     combustion efficiency    Patented design uses a cast iron burner ring with a flame spreader. 3. Low profile diverter     This special design allows maximum flexibility. All models furnished with a draft diverter design certified by American Gas Association.  4. Optimum energy transfer     Copper heat exchanger has intergral extruded fin copper tubes for maximum  efficiency.

5.Copper wall combustion chamber    Coils of tightly wound copper tubing form a unique and highly efficient combustion chambers.

TJV-120M   A.O. Smith storage tanks are ideal for use with gas-fired copper heat exchanger equipment for storage of ant potable water at temperatures of 180 degrees fahrenheit.                                Features: Glass-lined Tank: Alkaline borosilicate composition permanently fused to steel by firing at a temperature of 1600 degrees fahrenheit, providing years of corrosion protection and dependable use. Heavy Gauged Steel Jacket: With baked enamel finish and bonderized undercoat provides additional insulating qualities for greater energy savings. Threaded Openings: All tanks furnished with threaded openings for thermometer, relief valve, 2" recirculation lines, tankstat, and drain valve. Plus: Fits through 30" door; Magnesium anode; for anti-corrosion protection. 119 gallons; foam insulation exceeds ASHRAE requirements of R12.5; 150 psi working pressure.

More builders prefer A.O. Smith over any other brand. Dura-Power Standard Models Provide Inputs from 6 to 54 KW DRE Models:   converible from three-phase to single-phase (in field) and vice versa   DRE models are surface mounted   Incoloy sheath element   temperature and pressure relief valve Standard models utilize a heavy duty, medium watt density elements to minimize scale build up.

Features: 94% Thermal Efficiency Flexible Venting Advanced Electronic Controls Preset Power Burner Submerged Combustion Chamber Zero Inch Clearance Spiral Wound Flue Tube Scale Free Glass lined Tank Handhole Cleanout Foam Insulation Easy Installation

  A. Round flange Jet Pump Motor, Single Phase, 115/230 Volts, 3450 RPM, 60 Hz,
Stainless threaded shaft compatible with Myers, Goulds, Fairbank, Crane Deming, etc.

                              C. Spare Parts
                         1. A.O. Smith V. Switch Contact Stationary
                                    2. A.O. Smith Centrifugal Switch Spring
                                    3. Set Switch Stationary and Centrifugal with bolts and Stand
                                    4. Fan # 616603 Small
                                    5. Fan #610914-2 Big for old Model 2 Hp and 1 1/2 hp

Available: Stand Models                                Features: Deep Drawn Steel Shells: Provide maximum material strength. Inner Shell: Prevents diaphragm from over expanding. Heavy Duty Diaphragm: made of finest quality butyl rubber.                    Separates air and water, maintains air change. Interior Tank Lining: feature durable polypropelene liner. Meets                    FDA requirements. Plus: Easy levelling base with extra height for easy piping installation.