Bit Char-G Tech
Bit Char-G Modifications

Home
Bit Char-G Modifications | Bit Char-G Games | How-To-Fix Your Bit Char-G | Bits of News | Bit Char-G Pictures | Bit Char-G Videos | Models of Cars Available | My Bit | Forums

So far there are a few modifications you can do to your Bit.
Unfortunatley some...err....most of them are for very technologicly
skilled. 
 
EXAMPLE: Step 4. locate the orange cap on the circuit
board and desolder it. 
 
But in this section I will give you those and more! But first let's list
them. There is headlighs,brakelights,turn signals, and strobe lights
for you car. Or you may want police lights! Or lights that make the
ground under the car glow! I will walk you through a couple of
these each week. Onto the first one!

Headlights: To Install headlights you don't need to be the smartest person in the world. But you can't be the dumbest either. So here we go!
 
  • 2 Yellow LED lights 80 MCD; 2.1 Volts at 20mA
  • 1 CR2032 3V Lithium Battery

    To install the lights: First twist/solder one lead from each LED together so that a single wire may be used as positive and one as  negative. Then sticky tack the LEDs and battery into the chassis(the lights where the headlights are and the battery on th ceiling). To turn off the LEDs, just insert a non-conductive item such as a tiny clip of a piece of paper between the battery and the wire. And now you can have fun racing in the dark of the night! 

    		•

    Here is the Fish Tailing Mods. It's not really a mod but it's cool. First buy a tire set. Put Soft tires on the front. Then put Hard tires on the back. Then get a 3.0 motor. Now all you have to do is go on a straight away and go as fast as you can, then turn to the left or right. The car should then fishtail.
     
     
    There is a store called Mike's mods. They have everything you need for upgrades! They have police lights, strobelights, brakelights, turning signals, and more! Search for them on google by searching Bit char-g mikes mods.