|
Install
an internal modem
1.
Shut down the computer, but leave it plugged into the surge suppressor.
2. Disconnect all peripheral devices, such as the monitor, from
the computer.
3. Remove the computer's cover.
4. Ground yourself to the computer with any professional grounding
equipment you have. Otherwise, ground yourself by touching a metal
part of the chassis.
5. Remove the back panel if necessary.
6. Remove an existing modem, if any. Put new modem into that slot
if it will physically fit. Skip to step 9.
7. If computer doesn't already have a modem, find a slot that matches
the pins. PCI modems have fewer pins and fit into a smaller slot
than ISA modems.
8. Knock out or unscrew the metal plate on the slot holder on the
back panel, and insert the modem into the slot.
9. Replace the computer's back panel, if necessary, and any removed
screws. Screw modem into slot holder if it has a screw hole.
10. Reconnect the monitor, keyboard, and mouse. Connect the modem
to phone line.
11. Reboot the computer.
12. If Windows detects modem upon startup, follow the on-screen
instructions to install the driver and additional software. If Windows
doesn't detect the modem, manually complete the installation using
the Add New Hardware control panel.
13. Follow instructions in your modem manual to configure the modem
in Windows.
14. Adjust the modem settings to match your telephone service and
personal preferences.
15. Test the modem, then replace cover of computer.
Tips:
If possible, do installation in an uncarpeted area.
If you can, use the slot with the most open space around it.
Warnings:
Be careful not to touch any chips. Touch as little as possible on
modem or inside your machine.
If your computer is under manufacturer's warranty, modifying the
product usually ends that warranty.
If you do not understand these instructions or you lack good manual
dexterity, have a qualified technician install the modem for you.
|
