Personal Artillery: Generation 2

     This gun came into being with a lot less flare and more experience.  The first gun was getting old, and I think I may have already found the crack in it, so I was definitely not going to use it anymore, so I went out to the store and picked up enough ABS to make 2 guns, so I wouldn't have to buy more later.  I cut this one with pretty much the same ratio in mind as the first one, but of course I just eyeballed it and didn't really measure anything.  I assembled it, let it cure for a day, and installed the igniter.  Voila, we have the second generation spud gun!  

     Vital Stats

Chamber Length - 29"
Chamber Width - 4"
Barrel Length - 28 1/2"
Barrel Width - 2"
Overall Length - 58 1/2"

     Pictures

	The classing look down the barrel.
	Decent side profile showing how long my leads were.
	Just another view point.
	In the shop, with a fresh coat of green paint.
	On this one I didn't realize till it was too late that I had painted the cap on, so I had to fight to get it loose again.
	This shot really shows off the color and plays with the light well.