OFFICIAL HANOVER TECHNICAL SALES BLOG

WELCOME TO OUR BLOG

LOOK TO THIS SITE TO ANSWER
SOME OF THE MORE FREQUENT
QUESTIONS ABOUT THE APPLICATION
OF THE PRODUCTS WE SELL,
AND SOMETIMES RENT.

Toll Free - (800) 304-9043

Fax Line - (757) 357-9076

HAVE A QUESTION OR A SUGGESTION? PLEASE DROP US A LINE. WE WILL REPLY DIRECTLY, AND MAY PUT OUR ANSWERS ON THIS PAGE TO HELP OTHERS AS WELL

NO SALESMAN WILL CALL. OR SALES LADY, EITHER!

EMAIL sales@hanovertechnical.com

Click below for Prod. Info on:

Labels & Wire Markers On-Demand
KROY .. K-Sun ... EPSON Industrial ... LS5 ... LM2020

KROY Label Printer Repair ... Reconditioned Printers

LET US TURBOcharge YOUR KROY K-SERIES LABEL PRINTER

Electrical Test & Measurement
AEMC ... DENT

+++++++++++++++++++++++++++
What Others Say!
+++++++++++++++++++++++++++

This page viewed times since inception.


HANOVER
TECHNICAL SALES, INC. We're Your Empower Companysm


EMAIL sales@hanovertechnical.com
Phone 757-357-2677
US Toll Free (800) 304-9043
Fax (757) 357-9076
P. O. Box 70
Battery Park, VA 23304 USA

BLOGS START HERE:


Electric Power Data Logging

Electric Power Submetering

Electric Power Quality Analysis

Infrared Thermal Imaging Diagnostics

KROY Identify On Demand

Q - What is the most frequent cause of survivable failure in a KROY K-Series label and wire marker printer?
A - There is a #2032 lithium cell battery that preserves volatile memory in those printers. When the 3.0 volt battery goes below about 1.0 volts, the memory gets scrambled. At that point, the printer will do some odd and not always predictable things. All one has to do to resolve it is to replace the battery with a fresh one (they just cost about $3.00 each) and do a printer RESET. If you don't know how to do that, we can help you. When repairing or Turbocharging, our techs replace that battery anytime it shows signs of starting to deplete. That helps minimize downtime for the customer later on, and minimizes the number of premature returns for followup service by us.

Q - When I go to print multiple shrink tube wire markers with my Kroy K4350 machine, it prints one, advances the label supply for a while, then beeps and I get a red light. What might be wrong?
A - The software for most bulk label printers defaults to "labels with gaps". But heat shrink and some types of other label supply are continuous, rather than individual die cut laid out on the liner paper. We suggest that you check your material settings first, and if it's set on "labels with gaps" change it to "continuous". Still have a problem? Then give us a call.

KSUN Identify On Demand

When To Rent, When To Buy

Graphics utilized on these pages are the
property of respective contributors and
are not part of the public domain. Do not
reproduce in any form.

. This Page Last Modified September 14, 2017 @ 1358 ET

COPYRIGHT 2017
HANOVER TECHNICAL SALES, INC.

ALL RIGHTS RESERVED

.

OUR PEOPLE HELPING YOUR PEOPLE

When you buy from Hanover Technical Sales,
you'll get straight answers
I'll stake my reputation on it!
...... Don Lovett

EMAIL sales@hanovertechnical.com

.