|
WinchLock II
BLACK MAX SERIES - MAXIMUM SECURITY |
SPARE TIRE THEFT PROTECTION
3500 SERIES H/DUTY PICKUP
INSTALLATION INSTRUCTIONS
|
|
|
STEP ONE
Lower spare tire for access to the winch mechanism mounted above the frame cross-member. Locate the U-shaped steel bar that centers and supports the spare tire in the full/up stored position.
STEP TWO Place the U-bracket over the steel bar as shown, with the D-shaped hole facing the left frame rail. Insert the short bent over end of the lock bar through the round hole side of the U-bracket. Rotate the bar until the flat side of the bar aligns with flat side of the D-shaped hole in the other side of the U-bracket. Position the end of the bar through the U-bracket. Release and let the bar swing downward to a vertical position, which locks the end of the bar to the U-bracket. |
|
STEP THREE Raise the spare tire while guiding the lower end of lock bar through the lug hole least obstructed by the winch cable retaining plate in the center of the wheel. The lock bar must remain vertical as the spare tire is raised to the full up/stored position.
SPECIAL BLACK MAX LOCKING INSTRUCTIONS: (1) Remove the key from the lock cylinder.(2) Place the Black Max lock assembly over the end of the locking bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the cover/seal is compressed against the tapered surface of the lug hole. (4)Press in on the "Push To Lock" button with the lock assembly still held firmly against the wheel, to engage the deadbolt lock mechanism with the groove in the locking bar.
www.motivelocks.com