WinchLock II
BLACK MAX SERIES - MAXIMUM SECURITY |
DODGE
INSTALLATION INSTRUCTIONS
STEP ONE
Lower spare tire for access to winch mechanism and winch tube.
STEP TWO Place the U-shaped bracket over the winch tube, with the round hole in the bracket leg facing toward the right side the truck. Hold the lock bar horizontal and let the flat machined end engage the round hole in the bracket. Rotate the lock bar until the flat machined end is aligned with the flat sided hole in the opposite leg of the bracket and then pushing the end of bar through flat sided hole and letting the lock bar swing downward to a vertical position which will lock the end of the bar into the U-shaped bracket. |
SPECIAL BLACK MAX LOCKING INSTRUCTIONS:
(1)Remove the key from the lock cylinder. (2)Place the Black Max lock assembly over the end of the lock bar with the bar cover/seal end up. (3)Slide the lock assembly upward against the tapered surface of the lug hole. (4)Press inward on the "Press To Lock" button while holding the lock assembly firmly against the wheel to engage the dead bolt lock mechanism with the lock bar groove.
UNITED STATES PATENTS
4794771 - D399122 - 6505488