WinchLock II
BLACK MAX SERIES - MAXIMUM SECURITY |
INSTALLATION INSTRUCTIONS
STEP ONE Lower spare tire for access to winch mechanism and frame member directly above. Locate the stamped round hole in the frame cross-member panel approx. six inches diagonally to the rear of the winch mechanism.
|
STEP FOUR
Raise the spare tire while guiding the lower end of lock bar through the lug hole least obstructed by the winch cable retaining plate in the center of the wheel. The lock bar must remain vertical as spare tire is returned to the full up/stored position.
SPECIAL BLACK MAX INSTALLATION INSTRUCTIONS:
(1)Remove the key from the lock cylinder. (2)Place the Black Max lock assembly over the end of the locking bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the bar cover/seal is compressed in the tapered surface of the lug hole. (4)
Press in on the "Push To Lock" button with the lock assembly still held firmly against the wheel, to engage the dead bolt lock mechanism with the groove in the locking bar.