WINCHLOCK
SPARE TIRE THEFT PROTECTION EXPLORER SPORT TRAC 2000-UP
INSTALLATION INSTRUCTIONS
STEP ONE Lower spare tire for access to the winch mechanism mounted above the frame cross-member. Locate the two hex head mounting bolts that attach the winch mechanism to the frame cross-member. Remove the mounting bolt located on the left rear corner of the winch mechanism. Use the mounting bolt to install the U-bracket and position as shown in the picture. Install both flat washers between the U-bracket and cross-member.
STEP FOUR The PVC lock bar cover/seal is designed to center and hold the lock firmly against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.
Lubricate Grease Fitting Once A Year To Validate LIMITED LIFETIME CORROSION WARRANTY DO NOT Use Lithium Base Lubricants
4794771 - D399122 - 6505488
800/843-5701
|