WinchLock STANDARD SERIES - HIGH SECURITY |
SPARE TIRE THEFT PROTECTION
CHEVROLET-GMC-CADILLAC
SILVERADO - SIERRA - AVALANCHE PICKUPS
TAHOE - SUBURBAN - YUKON - ESCALADE SUV
2003-UP
INSTALLATION INSTRUCTIONS
STEP ONE Lower spare tire for access to the winch mechanism. Locate the vertical slot on the left (drivers) side of the winch mechanism. Use the small opening at the top of the slot to insert the 5/16" carriage head bolt, as shown in picture at left. |
STEP TWO Use the provided washer and locknut to attach the U-bracket to the winch mechanism. Position the U-bracket as shown in picture and tighten locknut. |
STEP THREE Install the lock bar through the holes in both legs of the U-bracket, with grooved end facing toward the rear of the vehicle. Place the crimp-ring retainer in the groove and crimp closed with pliers. |
STEP FOUR
Raise the spare tire while guiding the lower end of the lock bar through the lug hole least obstructed by the mounting plate attached to the winch cable in the center of the wheel.
STEP FIVE> The PVC lock bar cover/seal is designed to center and hold the lock firmly against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanismwith the lock bar groove. |
Lubricate Grease Fitting Once A Year To Validate Limited Lifetime Corrosion Warranty
DO NOT Use Lithium Base Lubricants
UNITED STATES PATENTS
4794771 - D399122 - 6505488
www.motivelocks.com