SPARE TIRE SAVER
STANDARD SERIES - BLACK MAX SERIES

SPARE TIRE THEFT PROTECTION

DODGE

3500 SERIES H/DUTY PICKUP
With Dual Rear Wheels
2004-UP

INSTALLATION INSTRUCTIONS

STEP ONE Lower spare tire for access to the winch mechanism and frame cross-member. Locate the 1/2" wide slot in the cross-member that extends forward to the white plastic winch cable guide bushing.


STEP TWO Use the provided 3/8" hex head bolt, lock nut and two flat washers to attach the U-bracket to the cross-member. Position the U-bracket under the slot in the cross-member with hex head bolt and flat washer upward through the mounting hole in the bracket. Install the lock nut and second flat washer over the end of the threaded end of the bolt. Align U-bracket as shown and tighten lock nut. Place lock bar through both legs of the U-bracket with the grooved end facing toward the left frame rail. Install crimp-ring retainer in the groove and crimp closed with pliers.

STEP THREE Raise the spare tire while guiding the lower end of lock bar through the lug hole least obstructed by the winch cable retaining plate in the center of the wheel. The lock bar must remain vertical as the spare tire is raised to the full up/stored position.

This Lock Is Designed To Install With The Spare Tire In The Original Factory Position, Valve Stem Down.

STANDARD SERIES LOCKING INSTRUCTIONS: The PVC bar cover/seal is designed to center and hold the lock against the tapered surface of the lug hole. Hold lock inverted with the PVC cover/seal end up. Place lock over the end of the lock bar. Slide lock upward against the tapered surface of the lug hole and rotate to engage lock mechanism with the lock bar groove.

BLACK MAX SERIES LOCKING INSTRUCTIONS: (1) Remove the key from the lock cylinder.(2) Place the Black Max lock assembly over the end of the lock bar with the bar cover/seal end up. (3)Slide the lock assembly upward until the cover/seal makes contact with the tapered surface of the lug hole. (4)Press in on the "Push To Lock" button with the lock assembly still against the surface of the wheel, to engage the deadbolt lock mechanism with the groove in the locking bar.


RECORD KEY CODE NUMBER FOR FUTURE REFERENCE

Lubricate Grease Fitting Once A Year To Validate LIMITED LIFETIME CORROSION WARRANTY
DO NOT Use Lithium Base Lubricants

UNITED STATES PATENTS
4794771 - D399122 - 6505488

Back||Main Page

800/843-5701

www.sparetiresaver.com