Early Broncos came with two different styles of brake lights. One style is a completely red lens with no backup light. The other style is more common and has a small trapazoidal clear section for a backup light. I will offer four different combinations based on this information. With the exception of STYLE 3, the LED lights I offer will completely replace the current light bucket. People have experienced different problems when trying to use LEDs in place of regular light bulbs. The most common problems are 1. they won't work under certain conditions; and 2. the turn signals flash EXTREMELY slow. To combat the second problem, see my Accessories page. The most likely cause of the first problem I listed is that the current flow through the LEDs is not being limited to flow in only one direction. I ran into this problem when I made my first set of LED lights. Each light I will sell has a diode placed in each each light's current path. This will eliminate any current flows in undesirable directions. Also, because these lights are made on fiblerglass curcuit board material and not sheet metal, each light will have a ground wire that will need to be attached to a good ground. I will supply a ring terminal for the ground wire. Below is the description of each style I will offer.
The light shown on the left here is what I am currently running on my Bronco. The lights I will be making will be similar but not the same. The LED's I will use will be surface mount. However, the concept is the same. I will supply a printed circuit board in the shape of the lens that will replace or be placed between the light bucket. To see what the LED's look like, please go to the Custom Work Page.
This light has 84 surface mount RED LEDs for the brake and turn signal function. These LEDs have a 210 mcd rating. The backup light funtion will use either 16 square HP-style WHITE LEDs, or 24 surface mount WHITE LEDs. The square HP-style LEDs have a 400 mcd rating whereas the surface mount LEDs have a 1100 mcd rating. The square LED's would look the same as the picture to the left.
This light has 84 surface mount RED LEDs for the brake and turn signal function. These LEDs have a 210 mcd rating. The turn signal funtion will use 36 surface mount AMBER LEDs. These LEDs have a 160 mcd rating.
This light has 84 surface mount RED LEDs for the brake and turn signal function. These LEDs have a 210 mcd rating. The reverse light will be the origional 1156 light bulb.
This light has 108 surface mount RED LEDs for the brake and turn signal function. These LEDs have a 210 mcd rating.
STYLE 1 - '67-'77 | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | $120.00 per pair |
STYLE 2 - '67-'77 | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | $100.00 per pair |
STYLE 3 - '67-'77 | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | $100.00 per pair w/ core |
STYLE 4 - '66 only | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | $100.00 per pair |