About the vertical mount, it's really
quite simple. If you look on the front part of the grip frame you will notice
a flat spot. This is almost big enough to fit an Automag vertical adaptor.
You just need to cut back part of the section with the Stingray logo on
it and file down the corners of the front flat spot so the vertical adaptor
fits snugly. (see picture vert2.jpg).
To make sure that it is strong enough I put a piece of brass strip between
the mounting screw and the frame.
Dave Johnson (aka Fubarius)
aka Fubarium on AOL
STING#034
TIP#3580 |