|
THIS IS THE WAY I LED THE HALYARDS TO THE COCKPIT. (I DO HAVE SAIL SLUGS). AS A BACKING FOR THE STAND-UP BLOCKS (RF1276) ON THE INSIDE OF THE CABIN ROOF I USED A PIECE OF PANELING GOING FROM ONE BLOCK TO THE OTHER AND A LITTLE LESS THAN A FOOT WIDE (WITH PROPER S/S WASHERS), WHERE I ALSO ATTACHED A CABIN LIGHT. TO PUT IN THE SWIVEL CLEATS (RF67) I REMOVED THE HAND-RAIL AND RE-ATTACHED IT USING BETTER SCREWS AND BACKING. ON THE STARBOARD SIDE YOU CAN SEE THE MAST RAISING LINE GOING THRU A BULLSEYE FAIRLEAD TO A SMALL CLEAT. ON THE PORT SIDE THERE IS ALSO THE JIB DOWNHAUL LINE GOING THE SAME WAY; BOTH THE JIB DOWNHAUL AND THE MAST RAISING LINE LEAD TO SMALL STAND UP BLOCKS NEXT TO THE STEMHEAD FITTING (ONE SIDE OF THEIR EYE STRAPS USES THE SAME SCREW THAT WAS HOLDING THE STEMHEAD).
|
|---|
Return to Pottering
OR
Please Send Comments to: Lionel L. Galibert:
llgalib@optonline.net