JBE              Jump If Below or Equal              Flags: not altered
 
JBE short-label
 
          Jump Condition:  Jump if CF = 1 or ZF = 1
 
    Used after a CMP or SUB instruction, JBE transfers control to short-
    label if the first operand was less than or equal to the second. (Both
    operands are treated as unsigned numbers.)  The target of the jump
    must be within -128 to +127 bytes of the next instruction.
 
  --------------------------------------------------------------------------
   Operands                  Clocks   Transfers  Bytes   Example
   short-label              16 or 4       -        2     JBE NOT_ABOVE
  --------------------------------------------------------------------------
 
       Notes:         JNA, Jump if Not Above, is the same instruction as
                      JBE.
 
                      JBE, Jump if Below or Equal, should be used when
                      comparing unsigned numbers.
 
                      JLE, Jump if Less Than or Equal, should be used when
                      comparing signed numbers.

Seealso:


 JNA 
 JLE 
 JA