Check out new products from great  water system manufacturers.
STA-RITE Water Systems
    FSN Series Self-Priming Shallow Well Jet Pumps  
 Materials: 

 Body and base- close-grained cast iron
 Nozzle- High strenth Lexan (FSN)
 Venturi- Lexan (FSN)
 Impeller-Lexan (FSN)
 Diffuser- reinforced polypropylene
 Shaft- one-piece threaded stainless steel

FSN models provide excellent performance with good pressure for wells 25' deep. Self-priming after the priming chamber has been filled with water .

                                   Pump Performance ( Capacity in Gallons Per Minute )

HP Cat. No. Discharge Pressure 5' 10' 15' 20' 25' Shut off psi
1/2 FSNCH 30 9.4 8.5 7.4 6.0 4.6 69
3/4 FSNDH 30 15.3 13.5 12.0 9.5 7.4 70

STA-RITE Water Systems
    Horizontal Convertible Shallow/Deep Well Pump  
      SL Convertible jet pump offer a proven self-prming design 
  that  features a suction-over-drive piping configuration. These 
  models are ideal for replacement installations. Using the HL
  eliminates using a reversing adapter or reconfiguring the 
  piping.  The HL design series can be used for shallow well, 4" 
  double pipe ans 2" or 3" single pipe installations.

  Materials:
  Body and base - closed-grained cast iron
  Impeller - Noryl
  Shaft - one peice threaded stainless steel
  Diffuser - reinforced polypropylene

 
Ordering Information:
Model Hp Description Pipe Tapping Sizes Motor 
Voltage		 Approx. Shipping
Weight (lbs.)
Suction Drive Discharge
    SLE  1.00 Base Mounted Pump 1-1/4" 1" 1" 115/230 70
  SLF  1.50 Base Mounted Pump 1-1/4" 1" 1" 115/230 75

STA-RITE Water Systems
    Vertical Multi-Stage Deep Well Pump  
Series MS Multi Stage Design Series DW well jet pumps
feature over-the-well "bolt-on" capability with a special casing adapter for 2" and 3" single pipe installations, and adapter flanges for adapting all double pipe installations and offset single pipe applications to the MS bolt-on DW jet pump. Suction and pressure connections are threaded for optional direct plumbing to the pump on double pipe and offset single pipe applications. 

  Materials:
               Body - rugged cast iron 
                 Pump and motor shaft- stainless steel 
                 Impellers- Noryl 
                 Diffuser - corrosion resistant(cast iron)
 
*** also includes automatic pressure regulator, pressure switch and pressure gauge***

                                    Ordering Information:

HP Catalog No. Suction Drive  Discharge Motor Voltage Max Pressure Regular Setting Approx.
Shipping
Weight (lbs.)
1 MSE 1-1/4" 1-1/4" 1" 115/230 60 PSI 73
1-1/2 MSF 1-1/4" 1-1/4" 1" 230 85 PSI 120
2 MSG 1-1/4" 1-1/4" 1" 230 95 SPI 125

STA-RITE Water Systems
    General Purpose Centrifugal Pump  
   J Series centrifugal pumps with Noryl impellers is abrasion 
       resistant for normal applications with working 
       temperatures to 140 degrees fahrenheit. The JB series is 
       equipped with brass impellers ans high temperature shaft 
       seals rated by the manufacturer for temperatures to 225 
       degrees fahrenheit.
Ordering Information
HP Model Description Pipe Tapping Sizes Motor Voltage Phase Approx. Shipping
Weight (lbs.)
Lexan Impeller Brass Impeller Suction Discharge
1/2 JHC JBHC high head 1-1/4" 1" 115/230 1 39
3/4 JHD JBHD high head 1-1/4" 1" 115/230 1 42
JHD3 JBHD3 208/230/460 3
1 JHE JBHE high head 1-1/4" 1" 115/230 1 45
JHE3 JBHE3 208/230/460 3
1-1/2 JHF JBHF high head 1-1/4" 1" 115/230 1 49
JHF3 JBHF3 208/230/460 3
2 JHG JBHG high head 1-1/2" 1-1/4" 230 1 69
JHG3 JBHG3 208/230/460 3
JMG - medium head 230 1 66
JMG3 - 208/230/460 3
2-1/2 JHHG JBHHG high head 2" 1-1/2" 230 1 74
JHHG3 JBHHG3 208/230/460 3

STA-RITE Water Systems
    Self Priming Centrifugal Pump  

Fast Priming DS2 Sereies pumps in1 through 2-1/2 hp models, with a low friction Noryl impeller. These high head pumps feature leakproof mechanical seals, easy service design, heavy duty motors, rugged construction. Self-priming after initial filling with water.
Ordering Information:
Model HP Pipe tapping Sizes Motor Voltage Phase Approx. Shipping
Weight (lbs.)
Suction Discharge
DS2HE 1 2" 1-1/2" 115/230 1 73
DS2HE3 1 2" 1-1/2" 208/230/460 3 73
DS2HF 1-1/2 2" 1-1/2" 115/230 1 79
DS2HF3 1-1/2 2" 1-1/2" 208/230/460 3 79
DS2HG 2 2" 2" 230 1 91
DS2HG3 2 2" 2" 208/230/460 3 91
DS2HHG 2-1/2 2" 2" 230 1 93
DS2HHG3 2-1/2 2" 2" 208/230/460 3 93


STA-RITE Water Systems
    End Suction Centrifugal Pump  
  Application: General purpose, process, booster, hot 
                          and cold water transfer and recirculation

  Description: 4- position discharge

  Materials: Cast iron with bronze or cast iron impellers

      for more inquiries : email us at amici@the.net.ph 
 


STA-RITE Water Systems
    4" Submersible Pump  
  Application:
       General water supply, 
       booster, sump circulation, 
               and irrigation 

  Description:
       Threaded connections 
         completely submerged
         sealed motor  2 and 3 wire

 Materials:
     Signiture 2000- Stainless Steel and 
         composite  construction with thermoplatic 
          impellers/ diffusers
      70 GPM Series- Cast Iron Bowls with 
           thermoplastic impellers

Horsepower:1/2 to 10 HP

Suction/ Discharge:1" to 2"
Pump Performance:
HP PSI Pumping Depth in feet Shutoff Head
20' 40' 60' 80' 100' 150' 200' 300' 400' 500' 600' 700' 800' 900' FEET PSI
20GPM
3/4 40 22.4 19.4 14.7 7.0 - - - - - - - - - - 181 78
1 40 26.4 24.7 22.7 20.7 18.4 5.9 - - - - - - - - 255 110
1-1/2 40 28.6 27.2 25.8 24.3 22.9 18.8 11.2 - - - - - - - 325 141
2 40 30.2 29.4 28.5 27.5 26.4 23.7 20.8 10.1 - - - - - - 435 188
3 40 31.6 31.0 .0.5 29.8 29.2 27.5 25.5 21.7 16.8 5.3 - - - - 615 266
5 40 - - - 31.7 31.4 30.7 29.6 27.7 25.4 22.9 20.4 17.5 11.5 - 1050 455
30 GPM
1 40 35.0 31.4 25.9 12.1 - - - - - - - - - - 175 76
1-1/2 40 36.0 33.5 30.8 27.7 20.0 - - - - - - - - - 210 91
2 40 39.9 38.3 36.6 34.8 32.7 25.1 - - - - - - - - 280 121
3 40 42.1 41.2 40.4 39.7 39.8 35.9 32.6 19.9 - - - - - - 420 182
5 40 43.8 43.4 43.0 42.7 42.1 40.9 39.4 36.1 - - - - - - 700 303
50 GPM
HP PSI 20' 40' 60' 80' 100' 125' 150' 175' 200' 250' 300' 350' 450' 550' FEET PSI
1-1/2 40 43.3 26.9 - - - - - - - - - - - - 145 63
2 40 52.8 45.0 32.5 11.0 - - - - - - - - - - 180 78
3 40 62.5 57.6 52.0 46.2 38.8 22.1 - - - - - - - - 135 102
5 40 69.9 67.9 65.5 63.2 61.0 57.0 53.2 48.0 43.5 27.0 - - - - 385 166
7-1/2 40 74.1 72.9 71.2 69.9 68.9 66.8 65.0 63.6 61.7 56.2 50.0 44.1 22.0 - 595 257
10 40 - 74.9 73.7 72.3 71.2 69.8 68.3 67.0 65.8 63.0 59.3 54.9 45.2 30.5 745 322

STA-RITE Water Systems
     Submersible Sewage Pump  
The "900S"Series pump is a rugged, cast iron, submersible pump with a non-clog two vane, semi-open impeller and solids handling capability to 2". Unit available with 1 to 2 HP single and three phase motors complete with 20' power cord. This unit features a 2" NPT vertical discharge. 

Applications:

  • Sewage, effluent and wastewater removal and transfer
  • Sump drainage
  • Dewatering
  • Flood Control
  • Circulation
  • Fountains
    1/2 to 3/4 HP available in the Series "700S" Submersible 
                                           Sewage Pump
Ordering Information:
Model HP Max load Ampere Volts Phase/cycle Solids Handling 
Capability		 Discharge
PWS7CO2 1/2 5.5 230 1 / 60 2" 2" NPT
PWS7CO3 1/2 3.5 230 3 / 60 2" 2" NPT
PWD7DO2 3/4 6.7 230 1 / 60 2" 2" NPT
PWS9EO2 1 8.5 230 1 / 60 2" 2" NPT
PWS9EO3 1 9.0 230 3 / 60 2" 2" NPT
PWS9FO2 1-1/2 12.0 230 1 / 60 2" 2" NPT
PWS9FO3 1-1/2 10.1 230 3 / 60 2" 2" NPT
PWS9GO2 2 15.0 230 1 / 60 2" 2" NPT
PWS9GO3 2 12.0 230 3 / 60 2" 2" NPT


STA-RITE Water Systems
    Effluent Pump  
 The "700E" Series pump is a rugged, submersible cast iron pump with non-clog, semi-open impeller and solids handling capability to 3/4". Unit has a 1/2, or 1 HP single or three phase motor complete with power cord. 2" NPT vertical discharge is standard.

Applications:

  • Effluent and wastewater removal
  • Sump drainage
  • Dewatering
  • Flood Control
  • Circulation
  • Fountains
Model HP Max Ampere Load Volts Phase/ Cycles Solids Handling 
Capability		 Discharge
PWE7CO2 1/2 6.4 230 1 / 60 3/4" 2" NPT
PWE7EO2 1 6.6 230 1 / 60 3/4" 2" NPT
PWE7EO3 1 5.8 230 3 / 60 3/4" 2" NPT

                               


STA-RITE Water Systems
    Sta-Rite Dura-Glas Series Pool Pump  
Dura Glas
High Head Pool/ Spa Pump
P2R SERIES

Features: 
    glass reinforced thermoplastic
body and trap, rapid self-priming 
capability, Stainless steel motor
shaft, sealed ball bearings,
precision molded impellers

 Dura Glas II
Second Generation
High Head Pool/ Spa Pump
P4R SERIES

Features:
New trap and basket design,
easier installation, superior 
flow characteristics, long
service life, and quiet
operation

                                 Ordering Information:

Catalog No. HP Max BHP Volts Capacity In Gallons Per Minute @ 40' TDH Suction Discharge
P2RA5C 1/2 0.65 115/230 40 1-1/2" 1-1/2"
P2RA5E 1 1.25 115/230 70 1-1/2" 1-1/2"
P2RA5F 1-1/2 1.65 115/230 85 1-1/2" 1-1/2"
P4RA6F 1-1/2 1.65 230 115 2" 2"
P4RA6G 2 2.2 230 125 2" 2"


STA-RITE Water Systems
    Sta-Rite JWP Series Pool Pump  
  Features:
  • Rugged thermoplastic construction in the time-proven Dura-Glas tradition.
  • Exceptionally quiet-running, ideally suited for on-ground and in-ground pool applications.
  • Large capacity trap features easy to open, see thru lid.
  • 1-1/2" FPT suction and 1-1/2" union-connected discharge; 1-1/2 FPT union half included
  • Continuous duty rated 3/4 thru 1-1/2 HP motors suitable for outdoor installation
  • No tools required for normal plumbing or maintenance operations.
Model HP Motor Voltage Capacity in Gallons Per minute 
@ 40' TDH		 Approx. Shipping 
Weight ( lbs.)
   JWPA5D     3/4  115 20 25.5
JWPA5E 1 115 45 27
JWPA5F 1-1/2 115/230 60 28

STA-RITE Water Systems
    Sta-Rite System 3 D.E. / Modular D.E. Filter  

       System 3 tanks feature 
    Dura-Glas construction Posi-Lok 
        clamping system and 
    interchangeability of media - in a 
         revolutionary design for 
      operational  superiority and 
    ease of maintenance and service.
          Square, multiple grid design 
    assures the most efficient use of 
    filter area. Top down backwash is 
    flow-balanced, guaranteeing 
    complete cleaning of even the 
    dirtiest media. Grid cloth has 
    multiple seams for long lasting 
    performance.
SD Series:

      S7D75 -   74 GPM (max flow)
                        37 Sq. Ft. (filter area)

      S8D110- 106GPM (max flow)
                        53 Sq. Ft. (filter area)

   Tank port size: 2"

      Also Available:
      Modular D.E. Filter
     PLD50 - 60 GPM (max flow)
                      30 Sq. Ft. (filter area)

STA-RITE Water Systems
    Sta-Rite ModularMedia/ Cartridge Filter  

Modular Media Filter
* almost maintenance free... balanced-flow
tank design uses entire media surface to collect dirt

  Glass Reinforced Thermoplastic Pool/ 
Spa Cartridge Filter
* recommended for all hot water spa 
and most swimming pool applications 

STA-RITE Water Systems
    Sta-Rite Max-E-Therm Pool Heaters  
      Sta-Rite Max-E-Therm Pool Heaters
      and Spa Heaters were designed to outperform all
       other pool heaters and spa heaters in today's market. 
       For example, it's the only pool heater and spa heater 
       to feature a rustproof exterior. 
       Unlike metal enclosures, Max-E-Therm is made of
       Dura-Glas - a sleek, lightweight and rustproof exterior. 
       Which means it not only lasts longer in the elements, 
       but it's also far more attractive than the large metal
       units.                                    

      Safe ignition.
      With its hot surface electronic ignition, you never have
       to worry about a pilot light blowing out and leaking
       gas.
 
      Weatherproof easy-read digital display.
      The weatherproof digital display rotates to six different 
       positions, making it accessible with any plumbing
       configuration. To help you read the display on 
       bright  days, a pivoting plastic visor filters the 
       light.                                                             

 

  Two programmable temperatures.
  For pools with a built-in spa, the Max-E-Therm 
   has two temperature settings displayed in F° or 
   C°. The internal safety feature lets you set 
   maximum temperature levels.

  iagnostic lights.
  Should a problem ever arise, the control panel 
   indicator lights tell you whether to service the
   heater or the system.
 
back to main page