CALL TOLL FREE 888-466-RACE
847-259-3810    FAX 847-259-9705
E-MAIL DAND214@MSN.COM
HTTP://WWW.FRESHAIRSYSTEMS.COM

                  HELMET CONVERSIONS
101--THE SELF CONTAINED HELMET BLOWER SYSTEM CONSISTS OF
A 7.2 VOLT FAN INSIDE A ABS PLASTIC HOUSING. THIS SYSTEM
IS DESIGNED TO BE MOUNTED ON A SIMPSON SIDEWINDER HELMET
OR A BELL FORCED AIR HELMET. THIS SYSTEM RUNS OFF A 7.2V
RECHARGEABLE BATTERY PACK (NOT INCLUDED) OR 12 VOLT SOURCE.
PRIMARILY USED IN SPRINT CARS AND, DIRT LATE MODEL, OFF
ROAD VEHICLES AND SOME DRAG RACING. ADDS ONLY 4 OZ TO
HELMET WEIGHT.

102--SAME SYSTEM AS ABOVE BUT DESIGNED TO BE MOUNTED
ON ANY SIMPSON, BELL, SHOEI OR ARAI FULL FACE HELMET
WITHOUT A SIDEWINDER OR FORCED AIR PORT.

103--THE REMOTE INTAKE SYSTEM IS DESIGNED TO COUPLE THE
HELMET UP TO A EXTERNAL BLOWER SYSTEM ( DESERT, REMOTE
INTAKE, OR HOSE BLOWER).  THIS SYSTEM IS DESIGNED TO
ENHANCE THE FLOW OF AIR INTO THE SIDEWINDER AND FORCED
AIR HELMETS. FLOW INCREASE IS AS MUCH AS 300% BETTER
STOCK. WILL KEEP GLASSES AND SHIELD FROM FOGGING.
THIS SYSTEM USED BY MANY DIFFERENT TYPES OF RACING
INCLUDING WINSTON CUP TEAMS.

104--SIMILAR TO ABOVE SYSTEM THIS SYSTEM IS DESIGNED
TO TAKE A NON SIDEWINDER OR FORCED AIR HELMET AND
CONVERT IT TO A REMOTE INTAKE HELMET TO BE USED WITH
A EXTERNAL BLOWER. WE ADD ON A SIDEWINDER STYLE INLET
TO THE SIDE OF THE HELMET AND  MOLD DUCT WORK INTO THE
INSIDE OF THE HELMET FOR VENTILATION.

                 BLOWERS
120--THE HOSE BLOWER SYSTEM IS DESIGNED TO WORK WITH
OUR REMOTE INTAKE HELMETS. IT IS A SMALL 7.2 OR
12 VOLT BLOWER THAT CAN BE POWERED OF A SMALL
RECHARGEABLE BATTERY OR RUN OF A 12V CAR BATTERY.
THE BLOWER FEATURES 36” OF OUR HIGH FLOW 1 ½” HOSE
WITH MOLDED HOSE ENDS. THIS BLOWER IS SIMILAR TO
THE SELF CONTAINED SYSTEM BUT MOUNTED AWAY FROM THE
DRIVER TO REDUCE NOISE AND PLACE THE AIR FILTER IN A
BETTER POSITION TO PICK UP CLEAN AIR (IE: MOUNTING
BLOWER ON TOP OF THE ROLL CAGE ON A SPRINT CAR.)
UNIT AVAILABLE WITH EITHER A 3M FILTRETE FILTER
OR K&N STYLE BREATHER FILTER.

121--THE REMOTE INTAKE BLOWER 105 CFM IS DESIGNED 
TO TAKE AIR FROM OUTSIDE THE RACE CAR AND PROVIDE 
THE DRIVER WITH PLENTY OF FRESH AIR. THE BLOWER IS
A 12 V. SQURILL CAGE BLOWER WITH A 5” AIR FILTER
MOUNTED ON TOP INSIDE A SPUN ALUMINUM CANISTER.
FILTERS ARE EASILY REPLACED BY REMOVING THREE SCREWS
AND LIFTING OUT FILTER. THIS HOUSING ACCEPTS A 3”
HOSE FROM A NACA DUCT. WE RECOMMENT THIS BLOWER
FOR SYSTEMS NOT USING A COOLER AND FOR RACES IN
COOLER CLIMATES.

122--SIMILAR TO ABOVE SYSTEM THE REMOTE INTAKE
150 CFM BLOWER IS DESIGNED TO BE USED WITH ALL OF
OUR COOLER SYSTEMS AND IN WARMER CLIMATES BY ITSELF.
THE SYSTEM USES A ALUMINUM INTAKE HOUSING WITH AN FILTER.
(SYSTEM USED BY WINSTON CUP TEAMS LATE MODEL PAVEMENT
AND DRAG RACERS RUNNING FULL BODIED CARS ALSO WORKS WELL
FOR SCCA AND ENDURANCE RACING)

123--THE DESERT BLOWER 105 CFM. IS DESIGNED FOR DIRT USE.
THE BLOWER HAS A ALUMINUM FILTER HOUSING AND TAKES IT’S
AIR DIRECTLY FROM AROUND THE FILTER HOUSING. THIS IS ALSO
A 12 VOLT SQUIRREL CAGE BLOWER. SYSTEM USED BY OFF ROAD
RACERS AND LATE MODEL DRIVERS WITH OPEN WINDOWED CARS

124--SIMILAR TO SYSTEM ABOVE THE 150 CFM DESERT BLOWER
IS DESIGNED TO BE USED IN HOT CLIMATES,  EXTENDED RACES
(I.E.: BAJA 1000), AND ALSO WHERE A COOLER IS DESIRABLE.
THE BLOWER TAKES IT’S AIR FROM AROUND THE FILTER HOUSING
SO IT MUST BE INSTALLED AWAY FROM EXHAUST PIPES. SYSTEM
USED BY BAJA RACERS, DIRT LATE MODEL USING COOLERS, AND
DRAG RACERS.

156 /120--THE HOSE BLOWER TUBE COOLER IS DESIGNED FOR CARS
WITH A LACK OF SPACE FOR A FULL SIZE COOLER AND BLOWER
SYSTEM. THE BLOWER IS SIMILAR TO THE HOSE BLOWER AND IS
AVAILABLE IN EITHER 7.2 OR 12 VOLT SYSTEMS. THIS COOLER
AND BLOWER IS PERFECT FOR CARS THAT RUN A MAGNETO IGNITION
AND NO ON BOARD 12 BATTERY. SYSTEMS USED BY SPRINT CAR,
DRAG RACERS AND SHORT COURSE DIRT RACERS.

131--THE 1 ½” BLUE VINYL STEEL REINFORCED HOSE IS DESIGNED
TO ALLOW GREATER AIR FLOW TO HELMETS AND REDUCE STRAIN
ON BLOWER SYSTEMS CAUSED BY EXCESSIVE BACK PRESSURE IN
SMALL 1” OR 1 Ό” HOSES. HOSE IS UV SUNLIGHT RESISTANT.

133--THE 3” BLUE VINYL STEEL REINFORCED HOSE IS DESIGNED
TO BRING FRESH AIR FROM THE OUTSIDE OF THE CAR INTO THE
REMOTE INTAKE BLOWER. THIS HOSE WILL FIT A 3” NACA 	DUCT.

141--THE 1.5” X 1.25”  HOSE END IS A CUSTOM MADE BLACK
VINYL FITTING DESIGNED TO BE USED ON FRESH AIR SYSTEMS
1.5” HIGH OUTPUT HOSE. THE DESIGN OF THIS END KEEPS
IT ATTACHED TO THE HELMET AND COOLER WITHOUT THE USE
OF TIE WRAPS OR DUCT TAPE.

142--THE 1.5” X 1.5” HOSE END IS A CUSTOM MADE
BLACK VINYL FITTING DESIGNED TO BE USED ON FRESH AIR
SYSTEMS BLOWERS. THIS FITTING WILL NOT FIT ON BLOWERS
MADE BY OTHER MANUFACTURERS.

                      COOLERS
151--THE SIX PACK COOLER IS A TWIN ELEMENT  8 QT. COOLER.
THE COOLER IS DESIGNED TO BE FILLED WITH ICE AND WATER.
(SEE CHART FOR DIMENSIONS AND SPECS.)

152--THE STANDARD SINGLE ELEMENT IS A 16 QT. COOLER.
THE COOLER IS DESIGNED WITH A SINGLE ELEMENT TO EXTEND
THE WORKING TIME AND PROVIDE SLIGHTLY LESS COOLING
THAN A TWIN ELEMENT VERSION. (SEE CHART FOR DIMENSIONS
AND SPECS.)

153--THE MAXI COOL TWIN ELEMENT 16 QT. COOLER. THE
COOLER IS DESIGNED FOR MAXIMUM COOLING CAPACITY.
THIS COOLER IS USED IN HOT CLIMATES.

155--THE MAXI COOL TWIN ELEMENT 24 QT. COOLER.
THE COOLER IS DESIGNED FOR EXTENDED RACES
REQUIREING MAXIMUM COOLING.  THIS COOLER IS
POPULAR WITH CROSS COUNTRY ENDURANCE RACES.

156--THE TUBE COOLER IS DESIGNED TO BE USED
FOR SHORT RACES LESS THAN 1 HOUR. THE COOLER
WEIGHS APPROX. 3.5 LB. DRY. FILLED WEIGHT 5-6 LB.

161 & 162--THE WORKHORSE BLOWERS ARE AXIAL
FANS DESIGNED FOR AUXILIARY COOLING OF
BRAKES OR OTHER NON HELMET VENTILATION.
THE 140 CFM HAS A 3” HOSE FITTING ON BOTH ENDS.
THE 240 CFM HAS A 4” HOSE FITTING ON BOTH ENDS.


DESCRIPTION	   WEIGHT DRY  HEIGHT  WIDTH  DEPTH
SIX PACK	      5.0       9.5     12     8.5
16 QT. SINGLE	      6.5      13.75    16.5   9.5
16 QT. DBL	      8.0      13.75	15.5   9.5
24 QT. DBL	      9.0      14.34    16    11.5
TUBE COOLER	      3.5      16.5  -------   3.5
150 CFM BLOWERS	      4.0
105 CFM BLOWERS	      3.0

RAFFO RACING HAS A NEW SYSTEM!

THE SYSTEM IS THE SAS 10. THIS SYSTEM IS DESIGNED FOR
NITRO FUNNY CAR DRIVERS IT INCLUDES THE 10 MINUTE AIR
SUPPLY AND REGULATOR ASSEMBLY AND THE HELMET CONVERSION.
THE SYSTEM WILL ELIMINATE MOST OF THE NITRO FUMES
INSIDE A DRIVERS HELMET AND REDUCE THE DRIVERS EXPOSURE
TO TOXIC FUMES IN CASE OF ACCIDENT.

PRODUCT                                                    PRICES    
RA #                                                     U.S.DOLLARS
RA101-12 Self-Contained System 12 V using a Sidewinder Helmet  214
RA101-72 Self-Contained System 7.2V using a Sidewinder Helmet  214
RA102-12 Self-Contained System 12 V  using a Non-Sidewinder    266
RA102-72 Self-Contained System 7.2 V using a Non-Sidewinder    266
RA103    Remote Intake Conversion using a Sidewinder           100
RA104    Remote Intake Conversion using a Non-Sidewinder       166

	      Blowers (all filter, air to helmet)	
	
RA120-12      Hose Blower System - 12 Volt	                167
RA120-72      Hose Blower System - 7.2 Volt	                167
RA121	      Remote Intake Blower- 105 CFM	                160
RA122         Remote Intake Blower - High Output 150 CFM        234
RA123         Desert Blower - 105 CFM		                135
RA124         Desert Blower - High Output 150 CFM               223
RA125-12      Side Kick  12 volt removable self contained       134 
RA125-72      Side-Kick  - 7.2 volt removable self-contained    169
RA126         Turbo  Remote Intake blower                       173
RRA127        Turbo - Desert                                    143
RA128         Turbo - Shortracker                               139
 
	         Air Hose - Premium Grade (priced per foot)

RA131	     High Output  1 ½”  I.D. Hose	                4.50
RA133        Remote Intake 3” I.D. (fits top of R.I. blower)    5.00
RA134	     High Output  2”  I.D. Hose  (R.I. Hose)            4.80

	    Hose Ends &  Aluminum Air Entrances & Reducers

RA141	 High Output 1 ½”- Hose End to Helmet or Cooler 1 1/4” 5.60
RA142    High Output 1 ½”- Hose End to Blower 1 ½”X 1 ½”       5.60
RA144    Spun Aluminum Naca Duct Reducer - 3” x 1 ½”  *NEW*   16.40
RA145    Spun Aluminum  Naca Duct Reducer - 3” x 2”   *NEW*   16.40
RA146    3” Spun Aluminum Air Entrance Port           *NEW*   16.90
RA147    2”Spun Aluminum Air Entrance Port            *NEW*   16.40
RA148    1 ½” Spun Aluminum Air Entrance Port         *NEW*   15.80

	           Coolers (heat exchangers)	

RA151	   Six Pack - Twin Element                             195
RA152	   Standard - Single Element 16 Quart	               180
RA153	   Maxi-Cool -Twin Element  16 Quart	               235
RA156	   Tube Cooler - (light weight cooler)	               125

	     Work Horse / Universal Blower

RA161      140 CFM   3” (driver fan, brake cooler)               30
RA162	   240 CFM   4” (driver fan, brake cooler)               35
  
	     FILTERS (replacements for all blowers)

RA170	   Sock Filter 			                           8
RA174      Blower Filter - Standard (Fits # 121, 122, 123 & 127)  12
RA175      Blower Filter - Large (Fits Desert  #124  Only)        16
RA176      Turbo Blower Filter - Small (Fits # 126 & 128 ) *NEW*  12

			Miscellaneous  
RA180	   7.2volt rechargeable battery pack	                  25
RA181	   Battery charger 7.2 volt (overnight)		          20
RA182      Battery charger 7.2 volt (Quick Charge)                40
RA190	   Mounting bracket (Use With Turbos & Tube Cooler)       20
RA200	   Installation of Radio Helmet Kit (Labor Only)          40
    		MOST ITEMS IN STOCK AND READY TO SHIP!