Please do not copy this tutorial
to any web site without my written permission as I, Copyright 2000 ©
Kanded Kreationz, all rights reserved, own this tutorial. I don't mind if
you share in online groups to learn PSP as that's what I write them for ~
Enjoy If you have any questions please email me at Kanded
Kreationz©
Dimensional Tag Tutorial
Open
up a new transparent image 400 x 400.
Click on your selections tool icon .
Make sure you have it set on RECTANGLE.
Now
draw a RECTANGLE in the middle of your image.
![](../images/tutorialindex/dimensional_tag/3.jpg)
Now click on your FLOOD FILL icon
and flood fill this white.
![](../images/tutorialindex/dimensional_tag/5.jpg)
Next what you wanna do is buttonize it.
Go to EFFECTS, 3D EFFECTS, BUTTONIZE.
![](../images/tutorialindex/dimensional_tag/6.jpg)
These are the settings I Used.
But play with them until you get something you like.
Then Click OK.
Then click on SELECTIONS, and SELECT NONE.
![](../images/tutorialindex/dimensional_tag/7.jpg)
Add
A NEW LAYER.
Click on your selections tool icon .
Draw
another RECTANGLE inside the other one leave a 1/4 inch gap all the way
around. See PIX Below.
![](../images/tutorialindex/dimensional_tag/9.jpg)
Do not flood fill this RECTANGLE. Just BUTTONIZE it with the same
SETTINGS as before.
This is what mine looks like:
![](../images/tutorialindex/dimensional_tag/10.jpg)
Then go to SELECTIONS, SELECT NONE.
Add A NEW LAYER.
Click on your selections tool icon .
Draw
another RECTANGLE inside the MIDDLE RECTANGLE.
See Picture Below:
![](../images/tutorialindex/dimensional_tag/12.jpg)
Do not flood fill this RECTANGLE. Just BUTTONIZE it with the same
SETTINGS as before.
This is what mine looks like:
Then go to SELECTIONS, SELECT NONE.
Then go to LAYERS, MERGE, VERGE VISIBLE.
![](../images/tutorialindex/dimensional_tag/14.jpg)
Now click on your MAGIC WAND TOOL .
Then go to SELECTIONS, INVERT.
Your IMAGE should look something like this:
![](../images/tutorialindex/dimensional_tag/17.jpg)
Now go to EFFECTS, PLUG-INS, EYE CANDY, GLASS.
These are the setting I used:
Then click on the Check mark.
Then go to SELECTIONS, SELECT NONE.
This is what I now have.
![](../images/tutorialindex/dimensional_tag/19.jpg)
You can decorate it with any tubes you want and add text.
Then resize to the size you would like it to be.
This is my finished tag:
I hope you enjoyed this tutorial.
If you have any questions please feel free to e-mail me. :)
All Web Graphics And Design By:
Dazee's
Attic of Treasures©
Copyright 2000, Kanded
Kreationz©, All Rights Reserved.
|