| Price List - January 1999 | ||
| INDEX | ||
| Page | Prefix | Description |
| 14 | B | Bearings, Bushings and Thrust Washers |
| 5 | BR | Brackets |
| 12 | BS | Building Supplies |
| 4 | CA | Control Arms |
| 7 | DH | Drive Hardware: Ferrules, Drive Dogs, Bullet Noses & Streamlined Tail Pieces |
| 9 | EA | Engine Accessories, Parts and Modifications |
| 6 | EC | Engine Couplers: Square Drive, Super Flywheel Nuts, Collets |
| 6 | FC | Flex Cables |
| 6 | FCA | Flex Cable Assemblies with Prop Shafts |
| 6 | FCW | Flex Cables Welded to Prop Shafts |
| 12 | FG | Fiberglass |
| 12 | FS | Field Supplies |
| 8 | GE | Gasoline Engines |
| 13 | H | Hardware - Fasteners, Nuts, Screws, Washers |
| 2 | HBR | HBR Outdrives and Accessories |
| 15 | HK | Hardware Kits |
| 11 | HU | Boat Hulls |
| 4 | MM | Motor Mounts |
| 5 | MP | Mounting and Retainer Plates |
| 15 | MS | Marine Specialties Logos, Stickers and Attire |
| 15 | PP | Pivot Pins |
| 7 | PR | Propellers |
| 6 | PS | Propeller and Stub Shafts |
| 3 | RA | Rudder Assemblies and Accessories |
| 3 | RB | Rudder Blades |
| 13 | RS | Radio Supplies |
| 2 | SA | Strut Assemblies |
| 2 | SB | Strut Blades, Fixed Parallel & Angle Struts |
| 15 | SK | Special Kits |
| 5 | SL | Shaft Log |
| 5 | ST | Stuffing Tube |
| 4 | TF | Turn Fins, Double Skegs |
| 2 | VOA | VOA Outdrive |
| 4 | W | Water Pickups, Outlets and Fittings |
| NEW PART NUMBER | OLD PART NUMBER | DESCRIPTION | RETAIL PRICE | |
| OUTDRIVE & STRUT ASSEMBLIES WITH MOUNTING BRACKETS AND SS HARDWARE | ||||
| SAMR-6S | 1029 | Mid Range Strut and T-Bracket, with 3/16" Sleeve Bearings | 17.75 | |
| SAFR-6F | Full Range Strut and T-Bracket, with 3/16" T-Flange Bearings | 19.75 | ||
| SAFR-6S | Full Range Strut and T-Bracket, with 3/16" Sleeve Bearings | 19.75 | ||
| SAFR-7S | Full Range Strut and T-Bracket, with 7/32" Sleeve Bearings | 19.75 | ||
| SAFR-8F | Full Range Strut and T-Bracket, with 1/4" T-Flange Bearings | 23.75 | ||
| SAFR-8S | Full Range Strut and T-Bracket, with 1/4" Sleeve Bearings | 19.75 | ||
| HBRTF1410-_ _ | 1030 | HBR Outdrive, Top Pull, with One 4 5/8" Long Fixed Rudder (.40 Size) see note B1, W1 | 52.75 | |
| HBRTF1502-_ _ | 1031 | HBR Outdrive, Top Pull, with One 5 1/8" Long Fixed Rudder (.60 Size) see note B1, W1 | 52.75 | |
| HBRTF2410-_ _ | 1032 | HBR Outdrive, Top Pull, with Two 4 5/8" Long Fixed Rudders (.40 Size) see note B1, W1 | 69.75 | |
| HBRTF2502-_ _ | 1033 | HBR Outdrive, Top Pull, with Two 5 1/8" Long Fixed Rudders (.60 Size) see note B1, W1 | 69.75 | |
| HBRTS1410-_ _ | 1034 | HBR Outdrive, Top Pull, w/One 4 5/8" Long Safety Shear Rudder (.40 Size) note B1, W2 | 52.75 | |
| HBRTS1502-_ _ | 1035 | HBR Outdrive, Top Pull, w/One 5 1/8" Long Safety Shear Rudder (.60 Size) note B1, W2 | 52.75 | |
| HBRTS2410-_ _ | 1036 | HBR Outdrive, Top Pull, w/Two 4 5/8" Long Safety Shear Rudders (.40 Size) note B1, W2 | 69.75 | |
| HBRTS2502-_ _ | 1037 | HBR Outdrive, Top Pull, w/Two 5 1/8" Long Safety Shear Rudders (.60 Size) note B1, W2 | 69.75 | |
| HBRCF1410-_ _ | HBR Outdrive, Centerpull, with One 4 5/8" Long Fixed Rudder (.40 Size) see note B1, W1 | 62.75 | ||
| HBRCF1502-_ _ | HBR Outdrive, Centerpull, with One 5 1/8" Long Fixed Rudder (.60 Size) see note B1, W1 | 62.75 | ||
| HBRCF2410-_ _ | HBR Outdrive, Centerpull, with Two 4 5/8" Long Fixed Rudders (.40 Size) see note B1, W1 | 79.75 | ||
| HBRCF2502-_ _ | HBR Outdrive, Centerpull, with Two 5 1/8" Long Fixed Rudders (.60 Size) see note B1, W1 | 79.75 | ||
| HBRCS1410-_ _ | HBR Outdrive, Centerpull, w/One 4 5/8" Long Safety Shear Rudder (.40 Size) note B1, W2 | 67.75 | ||
| HBRCS1502-_ _ | HBR Outdrive, Centerpull, w/One 5 1/8" Long Safety Shear Rudder (.60 Size) note B1, W2 | 67.75 | ||
| HBRCS2410-_ _ | HBR Outdrive, Centerpull, w/Two 4 5/8" Long Safety Shear Rudders (.40 Size) note B1, W2 | 84.75 | ||
| HBRCS2502-_ _ | HBR Outdrive, Centerpull, w/Two 5 1/8" Long Safety Shear Rudders (.60 Size) note B1, W2 | 84.75 | ||
| Note B1- Bearing Options: -6S (3/16" Sleeve), -6F (3/16" Flange), -7S (7/32" Sleeve), -8S (1/4" Sleeve), -8F (1/4" Flange add $5.00) | ||||
| Note W1- Water Pickup Options: -SWP (Side Water Pickup) add $10 each rudder | ||||
| Note W2- Water Pickup/Bilge Options: -SWP (Side Water Pickup), -BWP (Bottom Water Pickup), -BIL (Bilge) add $10 each rudder | ||||
| HBR-SOB200 | SOB200 | HBR Stand Off Bracket, 2" Long, Straight | 19.75 | |
| HBR-SOB200-2U | HBR Stand Off Bracket, 2" Long, Angled 2 Degrees Up From Transom | 23.75 | ||
| HBR-SOB200-5U | HBR Stand Off Bracket, 2" Long, Angled 5 Degrees Up From Transom | 23.75 | ||
| HBR-SOB200 | HBR Stand Off Bracket, 3" Long, Straight | 24.75 | ||
| HBR-TSK | HBR Steering Kit, Titanium Tie Rod, Marine Ball Joint Rod Ends and Stainless Steel Hardware | 19.75 | ||
| VOA304MP | 1038 | VOA-19M Variable Outdrive Assy, 3 1/4" Long Rudder (.21 Size Mono) | 34.75 | |
| VOA304MP-SWP | VOA-19M Variable Outdrive Assy, 3 1/4" Long Rudder, w/Side Water Pickup (.21 Size Mono) | 44.75 | ||
| VOA304HP | 1039 | VOA-19H Variable Outdrive Assy, 3 1/4" Long Rudder (.21 Size Hydro) | 34.75 | |
| VOA304HP-SWP | VOA-19H Variable Outdrive Assy, 3 1/4" Long Rudder, w/Side Water Pickup (.21 Size Hydro) | 44.75 | ||
| VOA312MP | 1040 | VOA-40M Variable Outdrive Assy, 3 3/4" Long Rudder (.40 Size Mono) | 34.75 | |
| VOA312MP-SWP | VOA-40M Variable Outdrive Assy, 3 3/4" Long Rudder, w/Side Water Pickup (.40 Size Mono) | 44.75 | ||
| VOA312HP | 1041 | VOA-40H Variable Outdrive Assy, 3 3/4" Long Rudder (.40 Size Hydro) | 34.75 | |
| VOA312HP-SWP | VOA-40H Variable Outdrive Assy, 3 3/4" Long Rudder, w/Side Water Pickup (.40 Size Hydro) | 44.75 | ||
| STRUT BLADES, FIXED PARALLEL & ANGLE STRUTS | ||||
| SBMR-6S | 1243 | Mid Range Strut, with 3/16" Sleeve bearings | 12.75 | |
| SBFR-_ _ | 1238 | Full Range Strut, with bearings, See Note B1 | 13.75 | |
| Note B1- Bearing Options: -6S (3/16" Sleeve), -6F (3/16" Flange), -7S (7/32" Sleeve), -8S (1/4" Sleeve), -8F (1/4" Flange add $5.00) | ||||
| SBHP-6S | 1237 | VOA Hydroplane Strut, with 3/16" Sleeve bearings | 10.75 | |
| SBMP-6S | 1236 | VOA Monoplane Strut, with 3/16" Sleeve bearings | 10.75 | |
| SBA100-6S | 1242 | 7.5o angle, 1" drop, with 3/16" Sleeve bearings | 8.50 | |
| SBA103-6F | 7.5o angle, 1 3/16" drop, with 3/16" Flange bearings | 12.75 | ||
| SBA103-6S | 1240 | 7.5o angle, 1 3/16" drop, with 3/16" Sleeve bearings | 10.75 | |
| SBA103-8F | 7.5o angle, 1 3/16" drop, with 1/4" Flange bearings | 15.75 | ||
| SBP100-6S | 1239 | Parallel, 1" drop, with 3/16" Sleeve bearings | 8.50 | |
| SBP106-6F | Parallel, 1 3/8" drop, with 3/16" Flange bearings | 12.75 | ||
| SBP106-6S | 1241 | Parallel, 1 3/8" drop, with 3/16" Sleeve bearings | 10.75 | |
| SBP106-8F | Parallel, 1 3/8" drop, with 1/4" Flange bearings | 15.75 | ||
| RUDDER ASSEMBLIES WITH MOUNTING BRACKETS AND SS HARDWARE | ||||
| RAS304 | 1020 | 1AR Straight Rudder Assy. 3 1/4" Long | 14.75 | |
| RAS304-BIL | 1AR Straight Rudder Assy. 3 1/4" Long, with Bilge | 22.75 | ||
| RAS304-BWP | 1AR Straight Rudder Assy. 3 1/4" Long, with Bottom Water Pickup | 22.75 | ||
| RAS304-SWP | 1AR Straight Rudder Assy. 3 1/4" Long, with Side Water Pickup | 22.75 | ||
| RATF410 | 1021 | 2AR Tapered Rudder Assy. 4 5/8" Long | 19.75 | |
| RATF410-SWP | 1027 | 2AR Tapered Rudder Assy. 4 5/8" Long, with Side Water Pickup | 27.75 | |
| RATF502 | 1022 | 3AR Tapered Rudder Assy. 5 1/8" Long | 19.75 | |
| RATF502-SWP | 1028 | 3AR Tapered Rudder Assy. 5 1/8" Long, with Side Water Pickup | 27.75 | |
| RATS410 | 1023 | Safety Shear Tapered Rudder Assy. 4 5/8" Long | 23.75 | |
| RATS410-BIL | Safety Shear Tapered Rudder Assy. 4 5/8" Long, with Bilge | 33.75 | ||
| RATS410-BWP | Safety Shear Tapered Rudder Assy. 4 5/8" Long, with Bottom Water Pickup | 33.75 | ||
| RATS410-SWP | Safety Shear Tapered Rudder Assy. 4 5/8" Long, with Side Water Pickup | 33.75 | ||
| RATS502 | 1024 | Safety Shear Tapered Rudder Assy. 5 1/8" Long | 23.75 | |
| RATS502-BIL | Safety Shear Tapered Rudder Assy. 5 1/8" Long, with Bilge | 33.75 | ||
| RATS502-BWP | Safety Shear Tapered Rudder Assy. 5 1/8" Long, with Bottom Water Pickup | 33.75 | ||
| RATS502-SWP | Safety Shear Tapered Rudder Assy. 5 1/8" Long, with Side Water Pickup | 33.75 | ||
| RATSC410 | Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long | 28.75 | ||
| RATSC410-BIL | Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long, with Bilge | 38.75 | ||
| RATSC410-BWP | Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long, with Bottom Water Pickup | 38.75 | ||
| RATSC410-SWP | Safety Shear Tapered Rudder Assy, Centerpull, 4 5/8" Long, with Side Water Pickup | 38.75 | ||
| RATSC502 | Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long | 28.75 | ||
| RATSC502-BIL | Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long, with Bilge | 38.75 | ||
| RATSC502-BWP | Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long, with Bottom Water Pickup | 38.75 | ||
| RATSC502-SWP | Safety Shear Tapered Rudder Assy, Centerpull, 5 1/8" Long, with Side Water Pickup | 38.75 | ||
| RUDDER ACCESSORIES | ||||
| RA-SPIN | 1026 | Shear Pins for Safety Shear Rudder | (Qty. 6) | 2.50 |
| RA-TORS | 1025 | Torsion Spring for Safety Shear Rudder (Stainless Steel) | 3.50 | |
| RUDDER BLADES | ||||
| RBS304 | 1225 | 1ARB, Straight Rudder Blade, 3 1/4" Long (.21 size) | 8.50 | |
| RBS304-BIL | 1ARB, Straight Rudder Blade with Bilge, 3 1/4" Long (.21 size) | 17.75 | ||
| RBS304-BWP | 1ARB, Straight Rudder Blade with Bottom Water Pickup, 3 1/4" Long (.21 size) | 17.75 | ||
| RBS304-SWP | 1ARB, Straight Rudder Blade with Side Water Pickup, 3 1/4" Long (.21 size) | 17.75 | ||
| RBT304 | 1230 | VOA-1RB, Rudder Blade, 3 1/4" Long, (.21 size) | 9.50 | |
| RBT304-SWP | 1230SWP | VOA-1RB, Rudder Blade, with Side Water Pickup, 3 1/4" Long, (.21 size) | 19.75 | |
| RBT312 | 1231 | VOA-2RB, Rudder Blade, 3 3/4" Long, (.40 size) | 9.50 | |
| RBT312-SWP | 1231SWP | VOA-2RB, Rudder Blade, with Side Water Pickup, 3 3/4" Long, (.40 size) | 19.75 | |
| RBTF410 | 1226 | 2ARB, Tapered Rudder Blade, 4 5/8" Long, (.40 size) | 13.75 | |
| RBTF410-SWP | 1232 | 2ARB, Tapered Rudder Blade with Side Water Pickup, 4 5/8" Long, (.40 size) | 23.75 | |
| RBTF502 | 1227 | 3ARB, Tapered Rudder Blade, 5 1/8" Long, (.60 size) | 13.75 | |
| RBTF502-SWP | 1233 | 3ARB, Tapered Rudder Blade with Side Water Pickup, 5 1/8" Long, (.60 size) | 23.75 | |
| RBTS410 | 1228 | Safety Shear Rudder, 4 5/8" Long, (.40 size), assy. with head | 15.75 | |
| RBTS410-BIL | Safety Shear Rudder with Bilge, 4 5/8" Long, (.40 size), assy. with head | 24.75 | ||
| RBTS410-BWP | Safety Shear Rudder with Bottom Water Pickup, 4 5/8" Long, (.40 size), assy. w/head | 24.75 | ||
| RBTS410-SWP | Safety Shear Rudder with Side Water Pickup, 4 5/8" Long, (.40 size), assy. with head | 24.75 | ||
| RBTS502 | 1229 | Safety Shear Rudder, 5 1/8" Long, (.60 size), assy. with head | 15.75 | |
| RBTS502-BIL | 1229BIL | Safety Shear Rudder, with Bilge, 5 1/8" Long, (.60 size), assy. with head | 24.75 | |
| RBTS502-BWP | 1229BWP | Safety Shear Rudder, with Bottom Water Pickup, 5 1/8" Long, (.60 size), assy. w/head | 24.75 | |
| RBTS502-SWP | 1229SWP | Safety Shear Rudder, with Side Water Pickup, 5 1/8" Long, (.60 size), assy. with head | 24.75 | |
| RBTSC410 | Safety Shear Rudder, Centerpull, 4 5/8" Long, (.40 size), assy. with Head & Arm | 25.75 | ||
| RBTSC410-BIL | Safety Shear Rudder, Centerpull, with Bilge, 4 5/8" Long, (.40 size), assy. with head & Arm | 34.75 | ||
| RBTSC410-BWP | Safety Shear Rudder, Centerpull, w/Bottom Water Pickup, 4 5/8" Lg, assy. w/head & Arm | 34.75 | ||
| RBTSC410-SWP | Safety Shear Rudder, Centerpull, w/Side Water Pickup, 4 5/8" Long, assy. w/head & Arm | 34.75 | ||
| RBTSC502 | Safety Shear Rudder, Centerpull, 5 1/8" Long, (.60 size), assy. with head & Arm | 25.75 | ||
| RBTSC502-BIL | Safety Shear Rudder, Centerpull, with Bilge, 5 1/8" Long, (.60 size), assy. with head & Arm | 34.75 | ||
| RBTSC502-BWP | Safety Shear Rudder, Centerpull, w/Bottom Water Pickup, 5 1/8" Long, assy. w/head & Arm | 34.75 | ||
| RBTSC502-SWP | Safety Shear Rudder, Centerpull, w/Side Water Pickup, 5 1/8" Long, assy. w/head & Arm | 34.75 | ||
| WATER PICKUPS, OUTLETS AND FITTINGS | ||||
| WF0832 | Water Fitting, #8-32 Thread, 3/8" Long, (Brass) | (Qty.2) | 2.50 | |
| WF1032L | 1290 | Water Fitting Long, #10-32 Thread, 1/2" Long, (Brass) | (Qty.2) | 2.50 |
| WF1032S | Water Fitting Short, #10-32 Thread, 3/8" Long, (Brass) | (Qty.2) | 2.50 | |
| WOSM-B | Water Outlet, Surface Mount (Brass) | 2.50 | ||
| WOSM-N | Water Outlet, Surface Mount (Nickle Plated Brass) | 3.00 | ||
| WOSM-S | Water Outlet, Surface Mount (Stainless Steel) | 3.00 | ||
| WPCA | 1100 | Clamping Water Pickup Assembly | 7.50 | |
| WPCA-2 | Dual Clamping Water Pickup Assembly | 14.75 | ||
| WPSM | Surface Mount Water Pickup, mounts through hull or trim tab (Brass) | 3.50 | ||
| WPT-CT | 1101 | Water Pickup Tube, 3/16" O.D. x 3 1/2" Long, Curved, Thd. 10-32 x 2", w/2 nuts | 4.50 | |
| DOUBLE SKEGS (TURN FINS) | ||||
| TFDS106 | 1000 | Double Skeg Turn Fin - Small (1 3/8" deep) | 9.50 | |
| TFDS110 | 1001 | Double Skeg Turn Fin - Large (1 5/8" deep) | 9.50 | |
| ALUMINUM CONTROL ARMS | ||||
| CA10-6 | 1016, 131 | 1.0" Long Control Arm for 3/16" Diameter Shaft | 3.75 | |
| CA10-8 | 1.0" Long Control Arm for 1/4" Diameter Shaft | 3.75 | ||
| CA15-6 | 1017, 1315 | 1.5" Long Control Arm for 3/16" Diameter Shaft | 3.75 | |
| CA15-8 | 1.5" Long Control Arm for 1/4" Diameter Shaft | 3.75 | ||
| MOTOR MOUNTS WITH MOUNTING PLATES AND HARDWARE | ||||
| MMF421 | 1004 | 4" Rails, F/.21 Motor, 1 3/16" Opening | 9.50 | |
| MMF440 | 1005 | 4" Rails, F/.40 Motor, 1 5/16" Opening | 9.50 | |
| MMF540 | 1006 | 5" Rails, F/.40 Motor, 1 5/16" Opening | 9.50 | |
| MMF560 | 1007 | 5" Rails, F/.60 Motor, 1 3/4" Opening | 9.50 | |
| MMI-4060A | 1008 | Assy.- QC Quick Change Mt. 5" W/.40 &.60 Inserts, 1 5/16" & 1 3/4" Opening | 23.75 | |
| MMI-40A | Assy.- QC Quick Change Mt. 5" W/.40 Insert, 1 5/16" Opening | 19.75 | ||
| MMI-60A | Assy.- QC Quick Change Mt. 5" W/.60 Insert, 1 3/4" Opening | 19.75 | ||
| MMIB | 1009 | Assy.- QC Master Mount W/1212 Mounting Plates | 14.75 | |
| MMI-40 | 1010 | QC40 Insert Adapter .40 Motor, 1 5/16" Opening | 6.50 | |
| MMI-60 | 1011 | QC60 Insert Adapter .60 Motor, 1 3/4" Opening | 6.50 | |
| MMG-E01 | Echo 21cc & 24cc Motor Mount for 5" rails, 7/8" Bore (GT) | 34.75 | ||
| MMG-E02 | Echo 21cc & 24cc Motor Mount for 5" rails, 1" Bore (Straight Shaft) | 34.75 | ||
| MMG-H01 | Homelite 25 & 30cc Universal Motor Mount for 5" rails, Direct Drive or Clutch | 34.75 | ||
| MMG-H02 | Homelite 25 & 30cc Engines with Clutch, Compact, Motor Mount for 5" rails | 34.75 | ||
| MMG-M2501 | McCulloch 21 & 25cc Engines, Motor Mount Offset for 5" rails, 7/8" Bore | 34.75 | ||
| MMG-M2502 | McCulloch 21 & 25cc Engines, Motor Mount Offset for 5" rails, 1" Bore (Straight Shaft) | 34.75 | ||
| MMG-M3501 | MS-35 Motor Mount, for 5" Rails - Only available with purchase of engine | 99.75 | ||
| MMG-M6001 | MS-60 Motor Mount, for 5" Rails - Only available with purchase of engine | 99.75 | ||
| MMG-M60X01 | MS-60X Motor Mount, for 5" Rails - Only available with purchase of engine | 99.75 | ||
| MMG-Z2301 | Zenoah G-23 Motor Mount for 5" rails, Requires front plate as a core | 64.75 | ||
| MMG-Z23CL | Zenoah G-23 Motor Mount and Clutch for 5" rails, Requires front plate as a core | 179.75 | ||
| MMG-Z4201 | Zenoah G-42 Motor Mount for 5" rails - Only available with purchase of engine | 99.75 | ||
| MMG-U1 | Motor Mount Kit for Gas Engine, Universal, Fits 5" Rails, 1" Tall Angle, 2 Kits Required | 14.75 | ||
| MMG-U2 | Motor Mount Kit for Gas Engine, Universal, Fits 5" Rails, 2" Tall Angle, 2 Kits Required | 14.75 | ||
| MMG-U3 | Motor Mount Kit for Gas Engine, Universal, Fits 5" Rails, 3" Tall Angle, 2 Kits Required | 14.75 | ||
| MMG-ISOL-08 | Rubber Isolator, 3/4" O.D. x 1/2" High, Male x Female 1/4"-20 UNC | 4.50 | ||
| MMG-ISOL-10 | Rubber Isolator, 3/4" O.D. x 5/8" High, Male x Female 1/4"-20 UNC | 4.50 | ||
| MMG-ISOL-K08 | Set of 4 Rubber Isolators, 3/4" O.D. x 1/2" High, Male x Female 1/4"-20 UNC & Stainless Steel Hardware | 14.75 | ||
| MMG-ISOL-K10 | Set of 4 Rubber Isolators, 3/4" O.D. x 5/8" High, Male x Female 1/4"-20 UNC & Stainless Steel Hardware | 14.75 | ||
| MMG-ISOPR-K08 | Set of Four Rubber Isolators (1/2" tall) and Perch Brackets, Includes Stainless Steel Hardware | 24.75 | ||
| MMG-ISOPR-K10 | Set of Four Rubber Isolators (5/8" tall) and Perch Brackets, Includes Stainless Steel Hardware | 24.75 | ||
| BRACKETS | ||||
| BR1219 | 1219 | Pivot Bracket for Straight Rudder | 3.50 | |
| BR1220 | 1220 | Pivot Bracket for 410 and 502 Rudders | 3.50 | |
| BR1221 | 1221 | Tee Bracket | 4.50 | |
| BR1222 | 1222 | HBR Master Bracket | 19.75 | |
| BR1222C | HBR Master Bracket, Center Pull Option for Reduced Transom Height | 24.75 | ||
| BR1223 | 1223 | HBR Pivot Bracket, 'C' Shaped | 4.50 | |
| BR1223M | HBR Pivot Bracket, 'C' Shaped, Milled and Taped to Mount to Transom | 8.50 | ||
| BR1224 | 1224 | VOA Master Bracket | 14.75 | |
| BR1244 | 1244 | Strut Mounting Bracket for placing Full Range Strut through the hull | 6.50 | |
| MOUNTING & RETAINER PLATES | ||||
| MP1211 | 1211 | RT-4, 2 Hole, Retainer Plate used with 4" Motor Mounts | 2.50 | |
| MP1212 | 1212 | RT-5, 4 Hole, Retainer Plate used with 5" Motor Mounts and HBR | 2.50 | |
| MP1213 | 1213 | 1MP Mounting Plate | 3.50 | |
| MP1214 | 1214 | 2/3 MP Mounting Plate | 3.50 | |
| MP1215 | 1215 | T Mounting Plate | 4.50 | |
| MP1216 | 1216 | VOA Mounting Plate | 4.50 | |
| SHAFT LOGS - STRAIGHT | ||||
| SL5-12 | 1117 | Shaft Log for 5/32" Cable, 3/16" I.D. x 1/4" O.D. x 12" Long, Straight | 6.50 | |
| SL5-18 | 1118 | Shaft Log for 5/32" Cable, 3/16" I.D. x 1/4" O.D. x 18" Long, Straight | 9.50 | |
| SL6-12 | 1119 | Shaft Log for 3/16" Cable, 7/32" I.D. x 9/32" O.D. x 12" Long, Straight | 8.50 | |
| SL6-18 | 1120 | Shaft Log for 3/16" Cable, 7/32" I.D. x 9/32" O.D. x 18" Long, Straight | 10.75 | |
| SHAFT LOGS WITH S-BEND | ||||
| SLB5-8 | 1125 | SL 1-08 Shaft Log for 5/32" Cable, 8" Long, 3/16" I.D. x 1/4" O.D., S-Bend | 5.00 | |
| SLB5-10 | 1126 | SL 1-10 Shaft Log for 5/32" Cable, 10" Long, 3/16" I.D. x 1/4" O.D., S-Bend | 5.50 | |
| SLB5-12 | 1127 | SL 1-12 Shaft Log for 5/32" Cable, 12" Long, 3/16" I.D. x 1/4" O.D., S-Bend | 6.50 | |
| SLB5-14 | 1128 | SL 1-14 Shaft Log for 5/32" Cable, 14" Long, 3/16" I.D. x 1/4" O.D., S-Bend | 7.00 | |
| SLB5-16 | 1129 | SL 1-16 Shaft Log for 5/32" Cable, 16" Long, 3/16" I.D. x 1/4" O.D., S-Bend | 7.50 | |
| SLB5-18 | 1130 | SL 1-18 Shaft Log for 5/32" Cable, 18" Long, 3/16" I.D. x 1/4" O.D., S-Bend | 8.50 | |
| SLB6-8 | 1133 | SL 2-08 Shaft Log for 3/16" Cable, 8" Long, 7/32" I.D. x 9/32" O.D., S-Bend | 6.50 | |
| SLB6-10 | 1134 | SL 2-10 Shaft Log for 3/16" Cable, 10" Long, 7/32" I.D. x 9/32" O.D., S-Bend | 7.00 | |
| SLB6-12 | 1135 | SL 2-12 Shaft Log for 3/16" Cable, 12" Long, 7/32" I.D. x 9/32" O.D., S-Bend | 7.50 | |
| SLB6-14 | 1136 | SL 2-14 Shaft Log for 3/16" Cable, 14" Long, 7/32" I.D. x 9/32" O.D., S-Bend | 8.50 | |
| SLB6-16 | 1137 | SL 2-16 Shaft Log for 3/16" Cable, 16" Long, 7/32" I.D. x 9/32" O.D., S-Bend | 9.50 | |
| SLB6-18 | 1138 | SL 2-18 Shaft Log for 3/16" Cable, 18" Long, 7/32" I.D. x 9/32" O.D., S-Bend | 10.75 | |
| STUFFING TUBE KITS - INCLUDE: STUFFING TUBE, MOUNTING TUBE, END SLEEVES & CUT FIBERGLASS | ||||
| STK-H35 | For Hawk 3.5, 3/16" Drive, 1/4"x9/32"x13" Lg Stuffing tube, 7/32"x1/4"x2" Lg End Sleeve | 9.50 | ||
| STK-H75 | For Hawk 7.5, 3/16" Drive, 1/4"x9/32"x15" Lg Stuffing tube, 7/32"x1/4"x2" Lg End Sleeve | 9.50 | ||
| STK6-12 | For 3/16" Drive, 12" Long, 7/32"x1/4"x12" Lg, 1/4"x9/32"x3" Lg, (2) 3/16"x7/32"x2" Lg. | 9.50 | ||
| STK6-18 | For 3/16" Drive, 18" Long, 7/32"x1/4"x18" Lg, 1/4"x9/32"x3" Lg, (2) 3/16"x7/32"x2" Lg. | 10.75 | ||
| STK8-12 | For 1/4" Drive, 12" Long, 9/32"x5/16"x12" Lg, 5/16"x11/32"x3" Lg, (2) 1/4"x9/32"x2" Lg. | 9.50 | ||
| STK8-18 | For 1/4" Drive, 18" Long, 9/32"x5/16"x18" Lg, 5/16"x11/32"x3" Lg, (2) 1/4"x9/32"x2" Lg. | 10.75 | ||
| STK-TT6 | Teflon tubing for 3/16" diameter flex cable, fits 9/32"O.D. x 1/4"I.D. tube, (price per foot) - not recommended | 2.50 | ||
| STK-TT8 | Teflon tubing for 1/4" diameter flex cable, fits 11/32"O.D. x 5/16"I.D. tube, (price per foot) - not recommended | 2.50 | ||
| PROPELLER SHAFTS & STUB SHAFTS | ||||
| PS1056 | 1056 | 3/16" Dia. - 22" Long, Precision Ground, No Threads, (Stainless Steel) | 10.75 | |
| PS1057 | 1057 | 3/16" Dia. - 22" Long, thd. #10-32 x 1/2", (Stainless Steel) | 13.75 | |
| PS1060 | 1060 | 3/16" Dia. - 2 1/2" Long, thd. #10-32 x 1/2", (Stainless Steel) | 3.50 | |
| PS1061 | 1061 | 3/16" Dia. - 3 1/8" Long, thd. #10-32 x 1/2", (Stainless Steel) | 3.50 | |
| PS1062 | 1062 | 3/16" Dia. - 2 1/2" Long, Bored for 5/32" Dia. Cable, thd. #10-32 x 1/2", (Stainless Steel) | 5.50 | |
| PS1063 | 1063 | 3/16" Dia. - 3 1/8" Long, Bored for 5/32" Dia. Cable, thd. #10-32 x 1/2", (Stainless Steel) | 5.50 | |
| PS1064 | 1064 | 3/16" Dia. - 2 1/2" Long, with Drive Pin, thd. #10-32 x 1/2", (Stainless Steel) | 5.50 | |
| PS1065 | 1065 | 3/16" Dia. - 3 1/8" Long, with Drive Pin, thd. #10-32 x 1/2", (Stainless Steel) | 5.50 | |
| PS1066 | 1066 | 3/16" Dia. - 2 1/2" Long, with Drive Pin, & Bored for 5/32" Cable, thd. #10-32 x 1/2", (Stainless Steel) | 6.50 | |
| PS1067 | 1067 | 3/16" Dia. - 3 1/8" Long, with Drive Pin, & Bored for 5/32" Cable, thd. #10-32 x 1/2", (Stainless Steel) | 6.50 | |
| PS1068 | 1068 | 3/16" x 7/32" Dia. - 2 15/16" Long, Bored for 3/16" Dia. Cable, thd. #10-32 x 1/2", (Stainless Steel) | 7.50 | |
| PS1069 | 1069 | 3/16" x 7/32" Dia. - 3 9/16" Long, Bored for 3/16" Dia. Cable, thd. #10-32 x 1/2", (Stainless Steel) | 7.50 | |
| PS1070 | 1070 | 3/16" Dia. - 4 1/16" Long, thd. #10-32 x 1/2", (Stainless Steel) | 4.50 | |
| PSF6 | 3/16" Dia. - 5 1/4" Lg. x 2" Brg. Length, Hardened Steel, with Ground Flats for Set Screws | 9.50 | ||
| PSF6-6K | 3/16" Dia. - 5 1/4" Lg. x 2" Brg, with Flex Ferrule (3/16"), Drive Dog & Streamlined Tail Piece | 15.75 | ||
| PSF6-8K | 3/16" Dia. - 5 1/4" Lg. x 2" Brg, with Flex Ferrule (1/4"), Drive Dog & Streamlined Tail Piece | 15.75 | ||
| PSF8 | 1/4" Dia. - 5 1/4" Lg. x 2" Brg. Length, Hardened Steel, with Ground Flats for Set Screws | 9.50 | ||
| PSF8-8K | 1/4" Dia. - 5 1/4" Lg. x 2" Brg, with Flex Ferrule (1/4"), Drive Dog & Streamlined Tail Piece | 15.75 | ||
| PSL6 | 3/16" Dia. - 4 5/8" Lg. x 1 3/8" Brg. Length, Hardened Steel, w/Ground Flats for Set Screws | 9.50 | ||
| PSL6-6K | 3/16" Dia. - 4 5/8" Lg. x 1 3/8" Brg, w/Flex Ferrule (3/16"), Drive Dog & Streamlined Tail Piece | 15.75 | ||
| PSL6-8K | 3/16" Dia. - 4 5/8" Lg. x 1 3/8" Brg, w/Flex Ferrule (1/4"), Drive Dog & Streamlined Tail Piece | 15.75 | ||
| PSL8 | 1/4" Dia. - 4 5/8" Lg. x 1 3/8" Brg. Length, Hardened Steel, w/Ground Flats for Set Screws | 9.50 | ||
| PSL8-8K | 1/4" Dia. - 4 5/8" Lg. x 1 3/8" Brg, w/Flex Ferrule (1/4"), Drive Dog & Streamlined Tail Piece | 15.75 | ||
| FLEX CABLE | ||||
| FC5-18 | 1073 | Flex Cable 5/32" O.D. x 18" Long | 5.50 | |
| FC5-24 | 1074 | Flex Cable 5/32" O.D. x 24" Long | 7.50 | |
| FC6-18 | 1075 | Flex Cable 3/16" O.D. x 18" Long | 6.50 | |
| FC6-18S | Flex Cable 3/16" O.D. x 18" Long, with Square on one end | 8.50 | ||
| FC6-24 | 1076 | Flex Cable 3/16" O.D. x 24" Long | 8.50 | |
| FC6-24S | Flex Cable 3/16" O.D. x 24" Long, with Square on one end | 10.75 | ||
| FC8-15 | Flex Cable 1/4" O.D. x 15" Long | 9.50 | ||
| FC8-15S | Flex Cable 1/4" O.D. x 15" Long, with Square on one end | 12.75 | ||
| FC8-21 | Flex Cable 1/4" O.D. x 21" Long | 11.75 | ||
| FC8-21S | Flex Cable 1/4" O.D. x 21" Long, with Square on one end | 13.75 | ||
| FLEX CABLE AND PROP SHAFT ASSEMBLIES | ||||
| FCA1062-12 | 1078 | 5/32" Cable - 12" Long, with #1062 (3/16" x 2 1/2" Prop Shaft) | 12.75 | |
| FCA1062-18 | 1079 | 5/32" Cable - 18" Long, with #1062 (3/16" x 2 1/2" Prop Shaft) | 14.75 | |
| FCA1062-24 | 1080 | 5/32" Cable - 24" Long, with #1062 (3/16" x 2 1/2" Prop Shaft) | 16.75 | |
| FCA1063-12 | 1081 | 5/32" Cable - 12" Long, with #1063 (3/16" x 3 1/8" Prop Shaft) | 12.75 | |
| FCA1063-18 | 1082 | 5/32" Cable - 18" Long, with #1063 (3/16" x 3 1/8" Prop Shaft) | 14.75 | |
| FCA1063-24 | 1083 | 5/32" Cable - 24" Long, with #1063 (3/16" x 3 1/8" Prop Shaft) | 16.75 | |
| FCA1066-12 | 1084 | 5/32" Cable - 12" Long, with #1066 (3/16" x 2 1/2" Prop Shaft) | 14.75 | |
| FCA1066-18 | 1085 | 5/32" Cable - 18" Long, with #1066 (3/16" x 2 1/2" Prop Shaft) | 16.75 | |
| FCA1066-24 | 1086 | 5/32" Cable - 24" Long, with #1066 (3/16" x 2 1/2" Prop Shaft) | 18.75 | |
| FCA1067-12 | 1087 | 5/32" Cable - 12" Long, with #1067 (3/16" x 3 1/8" Prop Shaft) | 14.75 | |
| FCA1067-18 | 1088 | 5/32" Cable - 18" Long, with #1067 (3/16" x 3 1/8" Prop Shaft) | 16.75 | |
| FCA1067-24 | 1089 | 5/32" Cable - 24" Long, with #1067 (3/16" x 3 1/8" Prop Shaft) | 18.75 | |
| FCA1068-12 | 1090 | 3/16" Cable - 12" Long, with #1068 (3/16" x 7/32" x 2 15/16" Lg. Prop Shaft) | 12.75 | |
| FCA1068-18 | 1091 | 3/16" Cable - 18" Long, with #1068 (3/16" x 7/32" x 2 15/16" Lg. Prop Shaft) | 14.75 | |
| FCA1068-24 | 1092 | 3/16" Cable - 24" Long, with #1068 (3/16" x 7/32" x 2 15/16" Lg. Prop Shaft) | 16.75 | |
| FCA1069-12 | 1093 | 3/16" Cable - 12" Long, with #1069 (3/16" x 7/32" x 3 9/16" Lg. Prop Shaft) | 13.75 | |
| FCA1069-18 | 1094 | 3/16" Cable - 18" Long, with #1069 (3/16" x 7/32" x 3 9/16" Lg. Prop Shaft) | 15.75 | |
| FCA1069-24 | 1095 | 3/16" Cable - 24" Long, with #1069 (3/16" x 7/32" x 3 9/16" Lg. Prop Shaft) | 17.75 | |
| FCW6-12 | 3/16" Flex Cable - 12" Long, Welded to 3/16" x 3 1/8" Long Prop Shaft, with #10-32 Thread | 12.75 | ||
| FCW6-21 | 3/16" Flex Cable - 24" Long, Welded to 3/16" x 3 1/8" Long Prop Shaft, with #10-32 Thread | 13.75 | ||
| ENGINE COUPLERS: SQUARE DRIVE ADAPTERS, SUPER FLYWHEEL NUTS, COLLETS | ||||
| EC-SDA4-6 | Square Drive Adapter, for 1/4"-28 Thread X 3/16" Square Cable | 9.50 | ||
| EC-SDA4-8 | Square Drive Adapter, for 1/4"-28 Thread X 1/4" Square Cable | 10.75 | ||
| EC-SDA5-6 | Square Drive Adapter, for 5/16"-24 Thread X 3/16" Square Cable | 9.50 | ||
| EC-SDA5-8 | Square Drive Adapter, for 5/16"-24 Thread X 1/4" Square Cable | 14.75 | ||
| EC-SDA6M-6 | Square Drive Adapter, for 6x1.0mm Thread X 3/16" Square Cable | 9.50 | ||
| EC-SDA6M-8 | Square Drive Adapter, for 6x1.0mm Thread X 1/4" Square Cable | 13.75 | ||
| EC-SDA7M-6 | Square Drive Adapter, for 7x1.0mm Thread X 3/16" Square Cable | 9.50 | ||
| EC-SDA7M-8 | Square Drive Adapter, for 7x1.0mm Thread X 1/4" Square Cable | 13.75 | ||
| EC-SDA8M-6 | Square Drive Adapter, for 8x1.25mm Thread X 3/16" Square Cable | 9.50 | ||
| EC-SDA8M-8 | Square Drive Adapter, for 8x1.25mm Thread X 1/4" Square Cable | 10.75 | ||
| EC-SDA10M-8 | Square Drive Adapter, for 10x1.25mm Thread X 1/4" Square Cable | 10.75 | ||
| EC-SDA-Z23D | Square Drive Adapter, for Zenoah G-23 Compact X 1/4" Square Cable | 14.75 | ||
| EC-COL-Z23A | Collet for Zenoah G-23 Compact x 1/4" Round Cable | 14.75 | ||
| EC-SFN-CA5 | 1181 | Super Flywheel Nut Cable Adapter for 5/32" Cable | 1.50 | |
| EC-SFN-CA6 | 1182 | Super Flywheel Nut Cable Adapter for 3/16" Cable | 1.50 | |
| EC-SFN4-5 | 1158 | Super Flywheel Nut Assembly for 1/4"-28 Thread x 5/32" Cable | 7.50 | |
| EC-SFN4-6 | 1175 | Super Flywheel Nut Assembly for 1/4"-28 Thread x 3/16" Cable | 7.50 | |
| EC-SFN4-6KB | 1175 | Super Flywheel Nut Assembly for 1/4"-28 Thread x 3/16" Cable (for K&B) | 7.50 | |
| EC-SFN5-5 | 1159 | Super Flywheel Nut Assembly for 5/16"-24 Thread x 5/32" Cable | 7.50 | |
| EC-SFN5-6 | 1176 | Super Flywheel Nut Assembly for 5/16"-24 Thread x 3/16" Cable | 7.50 | |
| EC-SFN5M-5 | 1160 | Super Flywheel Nut Assembly for 5x.80mm Thread x 5/32" Cable | 7.50 | |
| EC-SFN5M-6 | 1177 | Super Flywheel Nut Assembly for 5x.80mm Thread x 3/16" Cable | 7.50 | |
| EC-SFN6M-5 | 1161 | Super Flywheel Nut Assembly for 6x1.0mm Thread x 5/32" Cable | 7.50 | |
| EC-SFN6M-6 | 1178 | Super Flywheel Nut Assembly for 6x1.0mm Thread x 3/16" Cable | 7.50 | |
| EC-SFN7M-5 | 1162 | Super Flywheel Nut Assembly for 7x1.0mm Thread x 5/32" Cable | 7.50 | |
| EC-SFN7M-6 | 1179 | Super Flywheel Nut Assembly for 7x1.0mm Thread x 3/16" Cable | 7.50 | |
| DRIVE HARDWARE: FERRULES, DRIVE DOGS AND STREAMLINED TAIL PIECES | ||||
| DH-BN10-10 | Bullet Nose Mates 7/16" OD x 5/16" ID Full Range Strut to 5/16" OD Stuffing Tube, 1/4" ID Min, (Brass) | 3.50 | ||
| DH-BN10-8 | 1141 | Bullet Nose Mates 7/16" OD x 5/16" ID Full Range Strut to 1/4" OD Stuffing Tube, 1/4" ID Min, (Brass) | 3.50 | |
| DH-BN10-9 | 1142 | Bullet Nose Mates 7/16" OD x 5/16" ID Full Range Strut to 9/32" OD Stuffing Tube, 1/4" ID Min, (Brass) | 3.50 | |
| DH-DDOG6-12 | Drive Dog for 3/16" O.D. Prop Shaft, (3/8" O.D.) | 3.50 | ||
| DH-DDOG6-14 | Drive Dog for 3/16" O.D. Prop Shaft, (7/16" O.D.) | 3.50 | ||
| DH-DDOG6-14SS | Drive Dog for 3/16" O.D. Prop Shaft, (7/16" O.D.) (Stainless Steel) | 5.50 | ||
| DH-DDOG8-14 | Drive Dog for 1/4" O.D. Prop Shaft, (7/16" O.D.) | 3.50 | ||
| DH-FF6-6-12 | Flex Ferrule for 3/16" Prop Shaft to 3/16" Flex Cable (Brass) (3/8" O.D.) | 3.50 | ||
| DH-FF6-6-14 | Flex Ferrule for 3/16" Prop Shaft to 3/16" Flex Cable (Brass) (7/16" O.D.) | 3.50 | ||
| DH-FF6-6-14CS | 1143 | Cable Ferrule for 3/16" Flex Cable to 3/16" stub shaft (Steel) (7/16" O.D.) | 3.50 | |
| DH-FF6-8-14 | Flex Ferrule for 3/16" Prop Shaft to 1/4" Flex Cable (Brass) (7/16" O.D.) | 3.50 | ||
| DH-FF8-8-14 | Flex Ferrule for 1/4" Prop Shaft to 1/4" Flex Cable (Brass) (7/16" O.D.) | 3.50 | ||
| DH-STP6-12 | Streamlined Tail Piece for 3/16" O.D. Prop Shaft (3/8" O.D.) | 3.50 | ||
| DH-STP6-14 | Streamlined Tail Piece for 3/16" O.D. Prop Shaft (7/16" O.D.) | 3.50 | ||
| DH-STP8-14 | Streamlined Tail Piece for 1/4" O.D. Prop Shaft (7/16" O.D.) | 3.50 | ||
| PROPELLERS | ||||
| PR-ADAP | Propeller adapter to run 1/4" bore prop on 3/16" O.D. prop shaft | 1.75 | ||
| PR-SS15 | 2 Blade, 17-4PH Stainless Steel, 1.60" Diameter, 2.5" Pitch (3/16" I.D.) | 14.75 | ||
| PR-SS20 | 2 Blade, 17-4PH Stainless Steel, 1.72" Diameter, 2.6" Pitch (3/16" I.D.) | 14.75 | ||
| PR-SS25 | 2 Blade, 17-4PH Stainless Steel, 1.84" Diameter, 2.8" Pitch (3/16" I.D.) | 15.75 | ||
| PR-SS30 | 2 Blade, 17-4PH Stainless Steel, 1.90" Diameter, 3.0" Pitch (3/16" I.D.) | 15.75 | ||
| PR-SS35 | 2 Blade, 17-4PH Stainless Steel, 2.00" Diameter, 3.2" Pitch (3/16" I.D.) | 15.75 | ||
| PR-SS40 | 2 Blade, 17-4PH Stainless Steel, 2.12" Diameter, 3.3" Pitch (3/16" I.D.) | 15.75 | ||
| PR-SS45 | 2 Blade, 17-4PH Stainless Steel, 2.25" Diameter, 3.5" Pitch (3/16" I.D.) | 17.75 | ||
| PR-SS50 | 2 Blade, 17-4PH Stainless Steel, 2.30" Diameter, 3.6" Pitch (3/16" I.D.) | 17.75 | ||
| PR-SS55 | 2 Blade, 17-4PH Stainless Steel, 2.40" Diameter, 3.8" Pitch (3/16" I.D.) | 17.75 | ||
| PR-SS60 | 2 Blade, 17-4PH Stainless Steel, 2.52" Diameter, 3.9" Pitch (3/16" I.D.) | 17.75 | ||
| PR-SS65 | 2 Blade, 17-4PH Stainless Steel, 2.61" Diameter, 4.0" Pitch (3/16" I.D.) | 17.75 | ||
| PR-SS70 | 2 Blade, 17-4PH Stainless Steel, 2.74" Diameter, 4.2" Pitch (3/16" or 1/4" I.D.) | 17.75 | ||
| PR-SS75 | 2 Blade, 17-4PH Stainless Steel, 2.95" Diameter, 4.3" Pitch (3/16" or 1/4" I.D.) | 19.75 | ||
| PR-SS80 | 2 Blade, 17-4PH Stainless Steel, 3.10" Diameter, 4.5" Pitch (3/16" or 1/4" I.D.) | 19.75 | ||
| PR-BRX470 | 2 Blade, Berrylium Copper, 2.76" Diameter X 3.86" Pitch (1/4" I.D.) | 17.75 | ||
| PR-BRX470/3 | 3 Blade, Berrylium Copper, 2.76" Diameter X 3.86" Pitch (1/4" I.D.) | 22.75 | ||
| PR-BRX472 | 2 Blade, Berrylium Copper, 2.84" Diameter X 3.98" Pitch (1/4" I.D.) | 17.75 | ||
| PR-BRX572 | 2 Blade, Berrylium Copper, 2.84" Diameter X 4.26" Pitch (1/4" I.D.) | 17.75 | ||
| PR-BRX482 | 2 Blade, Berrylium Copper, 3.22" Diameter X 4.51" Pitch (1/4" I.D.) | 18.75 | ||
| PR-BRV967/3 | 3 Blade, Berrylium Copper, 2.64" Diameter X 5.02" Pitch (1/4" I.D.) | 22.75 | ||
| GASOLINE ENGINES | ||||
| GE-H25-ANS | Homelite 25cc, Stock, Air Cooled, includes: Canister Muffler & Square Drive, No Mounts, No Clutch | 99.75 | ||
| GE-H25-AMS | Homelite 25cc, Stock, Air Cooled, includes: Pro Mounts, Canister Muffler & Square Drive, No Clutch | 124.75 | ||
| GE-H25-AMS-SP | Homelite 25cc, Air Cooled, w/Straight Pull Manifold, Big Bore Carb, Pro Mounts, & Square Drive, No Clutch | 199.75 | ||
| GE-H25-WMS-SP | Homelite 25cc, Water Cooled, w/Straight Pull Manifold, Big Bore Carb, Pro Mounts, & Square Drive, No Clutch | 249.75 | ||
| GE-H25-1MS-SP | Homelite 25cc, Stage 1, Water Cooled, w/Straight Pull Manifold, Big Bore Carb, Pro Mounts, & Square Drive, No Clutch | 299.75 | ||
| GE-H25M | Homelite 25cc, Modifications, Options and Packages, Call for Information | call | ||
| GE-H30-ANS | Homelite 30cc, Stock, Air Cooled, includes: Canister Muffler, & Clutch with Square Drive, No Mounts | 149.75 | ||
| GE-H30-ACS | Homelite 30cc, Stock, Air Cooled, includes: Pro Mounts, Canister Muffler, & Clutch with Square Drive | 174.75 | ||
| GE-H30-ACS-SP | Homelite 30cc, Air Cooled, w/Straight Pull Manifold, Big Bore Carb, Pro Mounts, & Clutch with Square Drive | 249.75 | ||
| GE-H30-WCS-SP | Homelite 30cc, Water Cooled, w/Straight Pull Manifold, Big Bore Carb, Pro Mounts, & Clutch with Square Drive | 299.75 | ||
| GE-H30-1CS-SP | Homelite 30cc, Stage 1, Water Cooled, w/Straight Pull Manifold, Big Bore Carb, Pro Mounts, & Clutch with Square Drive | 349.75 | ||
| GE-H30M | Homelite 30cc, Modifications, Options and Packages, Call for Information | call | ||
| GE-MCC21 | McCulloch 21cc, Stock, with Mounts, with Clutch, with Canister Muffler, with Square Drive | 174.75 | ||
| GE-MCC21M | McCulloch 21cc, Modifications, Options and Packages, Call for Information | call | ||
| GE-MCC25 | McCulloch 25cc, Stock, with Mounts, with Clutch, with Canister Muffler, with Square Drive | 199.00 | ||
| GE-MCC25M | McCulloch 25cc, Modifications, Options and Packages, Call for Information | call | ||
| GE-MS35 | Marine Specialties 35cc Equalizer, Stock, no Mounts, no Clutch, no Pipe | 449.00 | ||
| GE-MS35M | Marine Specialties 35cc Equalizer, Modifications, Options and Packages, Call for Information | call | ||
| GE-MS60 | Marine Specialties 60cc Outlaw, Stock, no Mounts, no Clutch, no Pipe | call | ||
| GE-MS60M | Marine Specialties 60cc Outlaw, Modifications, Options and Packages, Call for Information | call | ||
| GE-MS60X | Marine Specialties 60cc Outlaw, with Overdrive, Stock, no Mounts, with Clutch, no Pipe | call | ||
| GE-MS60XM | Marine Specialties 60cc Outlaw, with Overdrive, Modifications, Options and Packages, Call for Information | call | ||
| GE-Z23-S | Zenoah G-23 Compact, Stock, no Mounts, no Clutch, no Pipe | 275.00 | ||
| GE-Z23-1 | Zenoah G-23 Compact, Stage 1, no Mounts, no Clutch, no Pipe | 325.00 | ||
| GE-Z23-2 | Zenoah G-23 Compact, Stage 2, no Mounts, no Clutch, no Pipe | 425.00 | ||
| GE-Z23-SMS | Zenoah G-23 Compact, Stock, with Pro Mounts and Square Drive, no Clutch, no Pipe | 349.75 | ||
| GE-Z23-1MS | Zenoah G-23 Compact, Stage 1, with Pro Mounts and Square Drive, no Clutch, no Pipe | 399.75 | ||
| GE-Z23-2MS | Zenoah G-23 Compact, Stage 2, with Pro Mounts and Square Drive, no Clutch, no Pipe | 499.75 | ||
| GE-Z23-SMC | Zenoah G-23 Compact, Stock, with Pro Mounts and Round Collet Drive, no Clutch, no Pipe | 349.75 | ||
| GE-Z23-1MC | Zenoah G-23 Compact, Stage 1, with Pro Mounts and Round Collet Drive, no Clutch, no Pipe | 399.75 | ||
| GE-Z23-2MC | Zenoah G-23 Compact, Stage 2, with Pro Mounts and Round Collet Drive, no Clutch, no Pipe | 499.75 | ||
| GE-Z23-SCS | Zenoah G-23 Compact, Stock, with Pro Mounts, Square Drive and Clutch, no Pipe | 449.75 | ||
| GE-Z23-1CS | Zenoah G-23 Compact, Stage 1, with Pro Mounts, Square Drive and Clutch, no Pipe | 499.75 | ||
| GE-Z23-2CS | Zenoah G-23 Compact, Stage 2, with Pro Mounts, Square Drive and Clutch, no Pipe | 599.75 | ||
| GE-Z23-SMS-SP | Zenoah G-23 Compact, Stock, w/Straight Pull intake, Big Bore Carb, Pro Mounts & Square Drive, no Clutch, no Pipe | 414.75 | ||
| GE-Z23-1MS-SP | Zenoah G-23 Compact, Stage 1, w/Straight Pull intake, Big Bore Carb, Pro Mounts & Square Drive, no Clutch, no Pipe | 464.75 | ||
| GE-Z23-2MS-SP | Zenoah G-23 Compact, Stage 2, w/Straight Pull intake, Big Bore Carb, Pro Mounts & Square Drive, no Clutch, no Pipe | 564.75 | ||
| GE-Z23-SMC-SP | Zenoah G-23 Compact, Stock, w/Straight Pull intake, Big Bore Carb, Pro Mounts & Round Collet Drive, no Clutch, no Pipe | 414.75 | ||
| GE-Z23-1MC-SP | Zenoah G-23 Compact, Stage 1, w/Straight Pull intake, Big Bore Carb, Pro Mounts & Round Collet Drive, no Clutch, no Pipe | 464.75 | ||
| GE-Z23-2MC-SP | Zenoah G-23 Compact, Stage 2, w/Straight Pull intake, Big Bore Carb, Pro Mounts & Round Collet Drive, no Clutch, no Pipe | 564.75 | ||
| GE-Z23-SCS-SP | Zenoah G-23 Compact, Stock, w/Straight Pull intake, Big Bore Carb, Pro Mounts, Square Drive & Clutch, no Pipe | 514.75 | ||
| GE-Z23-1CS-SP | Zenoah G-23 Compact, Stage 1, w/Straight Pull intake, Big Bore Carb, Pro Mounts, Square Drive & Clutch, no Pipe | 564.75 | ||
| GE-Z23-2CS-SP | Zenoah G-23 Compact, Stage 2, w/Straight Pull intake, Big Bore Carb, Pro Mounts, Square Drive & Clutch, no Pipe | 664.75 | ||
| GE-Z23M | Zenoah G-23 Compact, Modifications, Options and Packages, Call for Information | call | ||
| GE-Z26-JMS | J&G 25.6cc Billet Top End on Zenoah Bottom end, with Pro Mounts & Round Collet Drive, no Clutch, no Pipe | 749.75 | ||
| GE-Z26-JMC | J&G 25.6cc Billet Top End on Zenoah Bottom end, with Pro Mounts & Square Drive, no Clutch, no Pipe | 749.75 | ||
| GE-Z26-JCS | J&G 25.6cc Billet Top End on Zenoah Bottom end, with Pro Mounts, Square Drive & Clutch, no Pipe | 849.75 | ||
| GE-QD35 | Quickdraw Marine 35.7cc, A4P High Performance, Includes: engine, mount, tuned pipe and silencer | 1095.00 | ||
| GE-QD35-CL | Quickdraw Marine 35.7cc, A4P High Performance, Includes: engine, mount, Clutch, tuned pipe and silencer | 1225.00 | ||
| GE-Z42-SNN-SP | Zenoah G-42 Dominator, Stock, Straight Pull, no Mounts, no Clutch, no Pipe | 699.00 | ||
| GE-Z42-1MS-SP | Zenoah G-42 Dominator, Stage 1 Mods, Straight Pull, Tuned Pipe (Nickel Plated Steel), Pro Mounts, Square Drive | 1099.00 | ||
| GE-Z42-1MC-SP | Zenoah G-42 Dominator, Stage 1 Mods, Straight Pull, Tuned Pipe (Nickel Plated Steel), Pro Mounts, Round Collet Drive | 1099.00 | ||
| GE-Z42-1CS-SP | Zenoah G-42 Dominator, Stage 1 Mods, Straight Pull, Clutch, Tuned Pipe (Nickel Plated Steel), Pro Mounts, Square Drive | 1199.00 | ||
| GE-Z42-2MS-SP | Zenoah G-42 Dominator, Stage 2 Mods, Straight Pull, Tuned Pipe (Nickel Plated Steel), Pro Mounts, Square Drive | 1199.00 | ||
| GE-Z42-2MC-SP | Zenoah G-42 Dominator, Stage 2 Mods, Straight Pull, Tuned Pipe (Nickel Plated Steel), Pro Mounts, Round Collet Drive | 1199.00 | ||
| GE-Z42-2CS-SP | Zenoah G-42 Dominator, Stage 2 Mods, Straight Pull, Clutch, Tuned Pipe (Nickel Plated Steel), Pro Mounts, Square Drive | 1299.00 | ||
| GE-Z42M | Zenoah G-42 Dominator, Modifications, Options and Packages, Call for Information | call | ||
| GE-STAGE1 | Modified Engine, Increased Compression, Increased Exhaust Porting | 49.75 | ||
| GE-STAGE2 | Pro Modified Engine, Increased Compression, Increased Exhaust, Intake and Transfer Porting | 149.50 | ||
| GE-STAGE3 | Super Pro Modified Engine, Unlimited | call | ||
| GE-PT | Pressure Tap Option, for 1/8" Hose to Connect to Pulse Pump, Machining & Installation on Modified Motor. | 10.00 | ||
| GE-PTS | Pressure Tap Option, for 1/8" Hose to Connect to Pulse Pump, Machining & Installation on Stock Motor. | 25.00 | ||
| ENGINE ACCESSORIES, PARTS AND MODIFICATIONS | ||||
| EA-CS12 | CS12 | Carburetor Snozzler 3/4" Bore | 19.75 | |
| EA-HOMIMSP1 | Straight Pull Intake Manifold, Big Bore, with Screws and Gasket for Homelite | 29.75 | ||
| EA-HOMIMSP1-A | Straight Pull Intake Manifold, Big Bore Carburetor and Throttle Linkage for Homelite | 74.75 | ||
| EA-H25-P02-1K | Pro Modified Water Cooled Homelite 25cc Cylinder with Billet Al Water Jacket, Anodized Colors available | 99.75 | ||
| EA-H25-PPCK | Pro Power Kit f/25cc Homelite, Cylinder, Billet Al Water Jacket, Straight Pull Intake, Big Bore Carburetor, Throttle Linkage | 149.75 | ||
| EA-H25-PPCK30 | Big Bore Pro Power F/25cc Homelite: 30cc W/C Cylinder, Piston, Rings, Rod, Straight Pull, Big Bore Carburetor, Throttle Linkage | 199.75 | ||
| EA-HOM-P03 | Water Jacket, Billet Alluminum, fits Homelite 25cc & 30cc. Requires simple machining on cylinder. Anodized colors available: Blue, Red, Violet, Gold, Black or Natural. | 29.75 | ||
| EA-HOMTPAW1 | Tuned Pipe for Homelite: Exhaust Flange, Header Pipe & Expansion Chamber, (Al, Water Cooled) | 89.75 | ||
| EA-HOMTPAW1-C | Tuned Pipe Chamber for Homelite (Al) | 59.75 | ||
| EA-HOMTPAW1-M | Tuned Pipe Manifold/Header, Water Cooled, for Homelite (Al) | 39.75 | ||
| EA-H30-P02-1K | Pro Modified Water Cooled Homelite 30cc Cylinder with Billet Al Water Jacket, Anodized Colors available | 109.75 | ||
| EA-H30-PPCK | Pro Power Kit f/Homelite 30cc, Cylinder, Billet Al Water Jacket, Straight Pull Intake, Big Bore Carburetor, Throttle Linkage | 159.75 | ||
| EA-HOMTPS3 | Tuned Pipe for Homelite, Max Power Dry System, Nickel Plated Steel, Complete Exhaust with Silencer | 199.75 | ||
| EA-MS35CL | Clutch for MS-35, Must have Marine Specialties Mounts | 99.75 | ||
| EA-MS35CM | Canister Muffler for MS-35 | 39.75 | ||
| EA-MS35CM-K | Canister Muffler Kit for MS-35, Requires Welding | 19.75 | ||
| EA-MS35IMSP1 | Straight Pull Intake Manifold, with Screws and Gasket for MS-35 | 29.75 | ||
| EA-MS35IMSP1-A | Straight Pull Intake Manifold, Big Bore Carburetor and Throttle Linkage for MS-35 | 74.75 | ||
| EA-MS35IMSP1-CK | Carburetor Conversion Kit for MS-35 Straight Pull: Ext. Pulse Plate, Throttle Shaft, Swivel, Throttle Linkage | 19.75 | ||
| EA-MS35IMSP2-A | Performance Straight Pull Intake Manifold, WYK33 Carburetor and Throttle Linkage for MS-35 | 89.75 | ||
| EA-MS35TPA1 | Tuned Pipe for MS-35, Exhaust Flange, Header Pipe & Expansion Chamber, Silencer, (Al) | 139.75 | ||
| EA-MS60CL | Clutch for MS-60, Must have Marine Specialties Mounts | 99.75 | ||
| EA-QDCL1 | Centrifugal Clutch for Quickdraw Engines, Requires engine with tapered crankshaft and clutch style seal plate. Factory installed with purchase of engine. | 124.75 | ||
| EA-SP-BMR7A | Resistor Spark Plug, BMR7A, Zenoah, (Washer) | 4.50 | ||
| EA-SP-RCJ4 | Resistor Spark Plug, RCJ4, Fits All Popular Gas Engines, Zenoah, Extremely Cold, (Washer) | 3.50 | ||
| EA-SP-RCJ6Y | Resistor Spark Plug, RCJ6Y, Fits All Popular Gas Engines, Cold, Extended Electrode, (Washer) | 4.50 | ||
| EA-SP-RCJ8 | Resistor Spark Plug, RCJ8, Fits All Popular Gas Engines, (Washer) | 3.00 | ||
| EA-SP-RDJ7Y | Resistor Spark Plug, RDJ7Y, Homelite, Extended Electrode, (Taper) | 4.50 | ||
| EA-SP-RDJ8J | Resistor Spark Plug, RDJ8J, McCulloch, (Taper) | 4.50 | ||
| EA-TACH | Tachometer, Records Maximum RPM, Inductive Pickup | 74.75 | ||
| EA-TCKHOM | Throttle Cable kit for Stock Homelite | 9.50 | ||
| EA-TCKSP | Throttle Cable kit for Straight Pull Linkage, can also be used on WYK barrel carbs. | 4.50 | ||
| EA-TCKWAL | Throttle Cable kit for Walbro Butterfly style carburetors with Primer Bulb | 9.50 | ||
| EA-TPC14 | 1145 | Tuned Pipe Coupler, Silicone, 7/16" I.D. x 1 1/2" Long | 3.50 | |
| EA-TPC20 | 1146 | Tuned Pipe Coupler, Silicone, 5/8" I.D. x 1 1/2" Long | 3.50 | |
| EA-TPC22 | 1147 | Tuned Pipe Coupler, Silicone, 11/16" I.D. x 1 1/2" Long | 3.50 | |
| EA-TPSIL | Tuned Pipe Silencer for Stinger OD's of 1/2" (Al) | 19.75 | ||
| EA-WALC01 | Big Bore Carburetor, Walbro, 28 Ventury, Internal Pulse, SP Arm | 49.75 | ||
| EA-WALC02 | Big Bore Carburetor, Walbro, 28 Ventury, Performance Metering, External Pulse, SP Arm | 49.75 | ||
| EA-WALC03 | Big Bore Carburetor, Walbro, 32 Ventury, Performance Metering, Internal Pulse | 49.75 | ||
| EA-WALC04 | Big Bore Carburetor, Walbro, 34 Ventury, with Accelerator Pump, Performance Metering, Internal Pulse | 52.75 | ||
| EA-WALC33 | Walbro Carburetor WYK33, Barrel Style, 15mm Bore | 54.75 | ||
| EA-WALC67 | Big Bore Carburetor, Walbro 167, 28 Ventury, Internal Pulse, Primer Bulb, Stock Zenoah G-23 | 49.75 | ||
| EA-WALC-SPCK | Carburetor Conversion Kit for G-23 Straight Pull: Ext. Pulse Plate, Throttle Shaft, Swivel, Throttle Linkage | 19.75 | ||
| EA-WAL-D10 | Carburetor Diaphragms & Gaskets Rebuild kit for Walbro Butterfly Style Carburetors | 4.00 | ||
| EA-WAL-K10 | Carburetor Complete Rebuild kit for Walbro Butterfly Style Carburetors | 7.00 | ||
| EA-WAL-HSN | High Speed Needle, Finger Adjust for Walbro Butterfly Carberetors | 4.50 | ||
| EA-WAL-JETK | Walbro Jet Kit for Rotary Barrel Carburetor | 19.75 | ||
| EA-WAL-PRIM | Primer buld for Walbro Carburetors | 2.50 | ||
| EA-WALWP01 | Water Pump, Stock, 1/4" Hose Fittings | 24.75 | ||
| EA-WALWP02 | Water Pump, Modified, 1/8" Brass Hose Fittings, SS Hardware | 34.75 | ||
| EA-WALWP03 | Water Pump, Modified, 1/8" Brass Hose Fittings, Al Mounting Bracket, SS Hardware | 39.75 | ||
| EA-Z2D-P34 | Zenoah G2D and Quickdraw, Pull Starter, Complete | 34.75 | ||
| EA-Z23CL1 | Clutch for Zenoah G-23, Requires 1/8" spacing from motor on all 4 lugs. | 124.75 | ||
| EA-Z23CL2 | Clutch for Zenoah G-23, with Purchase of Engine | 99.75 | ||
| EA-Z23EPG | Exhaust Port Girdle for Zenoah G-23, includes Super Cool Water Jacket | 79.75 | ||
| EA-Z23IMSP1 | Straight Pull Intake Manifold, with Screws and Gasket for G-23 | 29.75 | ||
| EA-Z23IMSP1-A | Straight Pull Intake Manifold, Big Bore Carburetor and Throttle Linkage for G-23 | 74.75 | ||
| EA-Z23STRTKIT | Zenoah G-23 Starter Rebuild Kit, Engagement Dog & High Strength Abrasion Resistant Cord | 14.75 | ||
| EA-Z23STRTROP | High Strength Abrasion Resistant Pull Cord | 4.50 | ||
| EA-Z23TPA1 | Tuned Pipe for G-23, Exhaust Flange, Header Pipe & Expansion Chamber, (Al), Wrap to Center | 144.75 | ||
| EA-Z23TPA2S | Tuned Pipe for G-23, Exhaust Flange, Header Pipe & Expansion Chamber, (Al), 90 Degree to Rear, Short R | 144.75 | ||
| EA-Z23TPA2L | Tuned Pipe for G-23, Exhaust Flange, Header Pipe & Expansion Chamber, (Al), 90 Degree to Rear, Long R | 144.75 | ||
| EA-Z23TPA3 | Tuned Pipe for G-23, Exhaust Flange, Header Pipe & Expansion Chamber, (Al), 90 Forward & 180 Rear | 144.75 | ||
| EA-Z23TPA-C | Tuned Pipe Chamber for G-23 (Al) | 74.75 | ||
| EA-Z23TPA1-H | Header Pipe for G-23, (Al), Wrap to Center | 29.75 | ||
| EA-Z23TPA2S-H | Header Pipe for G-23, (Al), 90 Degree to Rear, Short Radius | 29.75 | ||
| EA-Z23TPA2L-H | Header Pipe for G-23, (Al), 90 Degree to Rear, Long Radius | 29.75 | ||
| EA-Z23TPA3-H | Header Pipe for G-23, (Al), 90 Degree Forward and 180 Degree to Rear | 29.75 | ||
| EA-Z23TPA-M | Water Cooled Manifold for G-23 | 39.75 | ||
| EA-Z23TPAW | Zenoah G-23, Tuned Pipe and Manifold (AL), Water Cooled Wet Pipe, Wrap Forward and Sideways | 109.75 | ||
| EA-Z23TPAW-C | Zenoah G-23, Tuned Pipe Chamber | 59.75 | ||
| EA-Z23TPAW-M | Zenoah G-23, Tuned Pipe Manifold (AL), Water Cooled Wet, Wrap Forward and Sideways | 49.75 | ||
| EA-Z23TPS1-QD | Tuned Pipe for G-23, Water cooled Exhaust Flange, Header Pipe & Expansion Chamber, (Steel) | 174.75 | ||
| EA-Z23TPS3 | Tuned Pipe for G-23, Max Power Dry System, Exhaust Flange, Expansion Chamber & Silencer, (Nickle Plated Steel) | 199.75 | ||
| EA-Z23-P02 | Marine Cylinder, Stock, for Zenoah G-23 | 89.75 | ||
| EA-Z23-P02-1 | Marine Cylinder, with Stage 1 modifications, for Zenoah G-23 | 119.75 | ||
| EA-Z23-P02-2 | Marine Cylinder, with Stage 2 modifications, for Zenoah G-23 | 199.75 | ||
| EA-Z23-P03 | Water Jacket, for Zenoah G-23, signature series anodized: natural, blue, red, gold, violet, or black | 29.75 | ||
| EA-Z23-P04 | See WF1032L | |||
| EA-Z23-P05 | Water Jacket Seal Kit for Zenoah G-23, Includes Large and Small O-Ring seals and 2 SS Socket Head Cap Screws | 7.00 | ||
| EA-Z23-P06 | See EA-Z23-P05 | |||
| EA-Z23-P07 | See H-SHC3M-8 or EA-Z23-P05 | |||
| EA-Z23-P08 | Base Gasket, for Zenoah G-23 | 1.50 | ||
| EA-Z23-P09 | Screw for Cylinder, Socket Head Cap Screw, 5 - .80 x 20mm Long, with washers, (Qty. 4) | 3.00 | ||
| EA-Z23-P10 | Gasket for Cylinder to Intake Manifold / Insulator, for Zenoah G-23 | 1.50 | ||
| EA-Z23-P11 | Insulator Block for Intake, for Zenoah G-23 | 11.75 | ||
| EA-Z23-P12 | Carburetor Gasket, for Walbro Butterfly Style Carburetors | 1.50 | ||
| EA-Z23-P13 | Crankcase Assembly, Complete with bearings, seals, bolts and gaskets. | 99.75 | ||
| EA-Z23-P16 | Case Gasket, for Zenoah G-23 | 1.50 | ||
| EA-Z23-P17 | Crankshaft Seal Set, Large and Small, for Zenoah G-23 | 10.75 | ||
| EA-Z23-P18 | Crankshaft Bearing, for Zenoah G-23 | 12.75 | ||
| EA-Z23-P19 | Snap Ring, for Zenoah G-23 | 1.50 | ||
| EA-Z23-P21 | See EA-Z23-P17 | |||
| EA-Z23-P22 | Case Screws, 5 - .80 x 30mm long, for Zenoah G-23, (Qty 4) | 3.50 | ||
| EA-Z23-P23 | Piston, for Zenoah G-23, Double Ring | 17.75 | ||
| EA-Z23-P23-1 | Piston, for Zenoah G-23, Single Ring | 17.75 | ||
| EA-Z23-P23-K | Piston Kit, for Zenoah G-23: Double Ring Piston, Piston Rings, Wrist Pin, Cir Clips | 34.75 | ||
| EA-Z23-P24 | Piston Rings, for Zenoah G-23, (Qty 2) | 10.75 | ||
| EA-Z23-P24-1 | Piston Ring, for Zenoah G-23, (Qty 1) | 5.50 | ||
| EA-Z23-P25 | Wrist Pin, for Zenoah G-23 | 4.50 | ||
| EA-Z23-P26 | Cir Clips to Retain Wrist Pin, for Zenoah G-23 and 25.6cc, (Qty 2) | 1.50 | ||
| EA-Z23-P27 | Wrist Pin Bearing, for Zenoah G-23 | 7.50 | ||
| EA-Z23-P28 | Thrust Washer for Wrist Pin, for Zenoah G-23, (Qty 2) | 5.50 | ||
| EA-Z23-P29 | Crankshaft, for Zenoah G-23 or 25.6cc | 99.75 | ||
| EA-Z23-P30 | Plate Mount, for Zenoah G-23 | 19.75 | ||
| EA-Z23-P31 | Screw, Flat Head, 5 - .80 x 16mm Long, for Zenoah G-23, (Qty 3) | 1.50 | ||
| EA-Z23-P33 | Pulley, 2 Lug stock, for Zenoah G-23 | 6.50 | ||
| EA-Z23-P33-4 | Quick Engagement 4 Tooth Starter Lug for Zenoah G-23, Threads to Crankshaft | 9.50 | ||
| EA-Z23-P34 | Recoil Starter Assembly Complete, for Zenoah G-23 | 34.75 | ||
| EA-Z23-P35 | Screw for Starter or Ignition Coil, 4 - .70 x 14mm Long, for Zenoah G-23, (Qty 4) | 1.50 | ||
| EA-Z23-P36 | Key for Flywheel, for Zenoah G-23 | 2.00 | ||
| EA-Z23-P37 | Shim for Crankshaft, for Zenoah G-23 | 1.50 | ||
| EA-Z23-P38 | Source Coil (Grey), for Zenoah G-23 | 69.75 | ||
| EA-Z23-P39 | Source Coil (Red), for Zenoah G-23 | 74.75 | ||
| EA-Z23-P40 | Ignition Coil, Grey, for Zenoah G-23 | 54.75 | ||
| EA-Z23-P41 | See EA-Z23-P35 | |||
| EA-Z23-P42 | Cap for Spark Plug, Red Silicon for Zenoah G-23 and other | 3.50 | ||
| EA-Z23-P44 | Spring for Spark Plug, for Zenoah G-23 and other | 3.50 | ||
| EA-Z23-P45 | Screw for Source Coil, 4 - .70 x 22mm Long, for Zenoah G-23, (Qty. 2) | 1.50 | ||
| EA-Z23-P46 | See EA-SP-RCJ4 | |||
| EA-Z23-P47 | Screw for Carburetor to Insulator, 5 - .80 x 50mm Long with Spacer Washer, for Zenoah G-23, (Qty. 2) | 4.50 | ||
| EA-Z23-P52 | See EA-WALC67 | |||
| EA-Z23-P53 | Screw for Insulator to Cylinder, 5 - .80 x 20mm Long, for Zenoah G-23 (Qty 2) | 2.00 | ||
| EA-Z23-P54 | Flywheel, for Zenoah G-23 | 64.75 | ||
| EA-Z23-P55 | Cannister Muffler for Zenoah G-23 | 39.75 | ||
| EA-Z23-P55-K | Cannister Muffler Kit for Zenoah G-23 | 34.75 | ||
| EA-Z23-P56 | Exhaust Gasket, for Zenoah G-23 | 1.50 | ||
| EA-Z23-P63 | Piston Stop Tool, holds crankshaft while tightening and loosening nuts and collets, fits G-23 and most others | 9.50 | ||
| EA-Z26-P11 | Insulator Block / Intake Manifold for J&G 22.5cc or 25.6cc Top end | 24.75 | ||
| EA-Z26-P23 | Piston for 25.6cc Zenoah Cylinder | 22.75 | ||
| EA-Z26-P24 | Piston Rings for 25.6cc Zenoah, (Qty 2) | 11.75 | ||
| EA-Z26-P25 | Wrist Pin for 25.6cc Zenoah | 4.50 | ||
| EA-Z26TOPEND | J&G 25.6cc Conversion kit for Zenoah G-23: Cylinder, Button Head, Sleeve, Water Jacket, Piston, Rings. Wrist Pin, Cir-clips | 429.00 | ||
| EA-Z42CL | Clutch for Zenoah G-42, Must have Marine Specialties Mounts | 99.75 | ||
| EA-Z42CM | Canister Muffler for G-42 - Not Recommended | 39.75 | ||
| EA-Z42TP1 | Tuned Pipe for G-42, Exhaust Flange, Header Pipe & Expansion Chamber, Silencer, (Steel) | 199.75 | ||
| BOAT HULLS | ||||
| HU-A31CH | 31” Challenger - Deep Vee/Mono, Aeromarine | 149.00 | ||
| HU-A32SC | 32” Scorpion - Deep Vee/Mono, Aeromarine | 149.00 | ||
| HU-A36SC | 36” Scorpion - Deep Vee/Mono, Aeromarine | 169.00 | ||
| HU-A43CH | 43” Challenger - Deep Vee/Mono, Aeromarine | 219.00 | ||
| HU-A48CH | 48” Challenger - Deep Vee/Mono, Aeromarine | 289.00 | ||
| HU-A50AP | 50” Apache - Deep Vee/Mono, Aeromarine | 299.00 | ||
| HU-A56AP | 56” Apache - Deep Vee/Mono, Aeromarine | 329.00 | ||
| HU-A57SI | 57” Signature - Deep Vee/Mono, Aeromarine | 329.00 | ||
| HU-84AP | 84" Apache - Deep Vee/Mono (Shipping is extra) | 450.00 | ||
| HU-A29SP | 29” Sprint Cat with Classic or Turbine Cowling, Aeromarine | 159.00 | ||
| HU-A35SP | 35” Sprint Cat with Classic or Turbine Cowling, Aeromarine | 219.00 | ||
| HU-A42SP | 42” Sprint Cat with Classic, Turbine or Competition Cowling, Aeromarine | 269.00 | ||
| HU-A29PO | 29” Popeye - Offshore Cat, Aeromarine | 189.00 | ||
| HU-A36OC | 36” Team Believer - Offshore Cat, Aeromarine | 219.00 | ||
| HU-A42OC | 42” Popeye, Team USA, Conquest, or Sunkist - Offshore Cat, Aeromarine | 269.00 | ||
| HU-A50OC | 50” Popeye or Pro Cat - Offshore Cat, Aeromarine | 339.00 | ||
| HU-A33HS | 33” Sport - 7 Liter, (White only) - Hydro, Aeromarine | 229.00 | ||
| HU-A37HS | 37” Sport – Bud or 7-11 - Hydro, Aeromarine | 229.00 | ||
| HU-A43HS | 43” 1/8 Scale Unlimited - Bud or Miller American - Hydro, Aeromarine | 349.00 | ||
| HU-A50HX | 50” Sport X – Bud or 7-11 - Hydro, Aeromarine | 339.00 | ||
| HU-A45SA | 45” Sabre Canard, Aeromarine | 329.00 | ||
| HU-A32SH | 32” Stinger - Outrigger Hydros, (White only), Aeromarine | 229.00 | ||
| HU-A35SH | 35” Stinger - Outrigger Hydros, (White only), Aeromarine | 289.00 | ||
| HU-A44SH | 44” Stinger - Outrigger Hydros, (White only), Aeromarine | 329.00 | ||
| HU-A30PR | 30” Preditor - Outboard Tunnel Hull, Aeromarine | 149.00 | ||
| HU-A33PR | 33” Preditor - Outboard Tunnel Hull, Aeromarine | 189.00 | ||
| HU-COLOR | Colored Gelcoat - Yellow, Red or Black (not available on all models) | 25.00 | ||
| HU-OTHER | All Other Models Available, Call for Details - Dumas, Prather, Aeromarine and Others | call | ||
| FIBERGLASS | ||||
| FG-C08 | CF08 | Cut Fiberglass .5" Strands | 2 Ounces | 4.50 |
| FG-C16 | CF16 | Cut Fiberglass 1.0" Strands | 2 Ounces | 4.50 |
| FG-C32 | CF32 | Cut Fiberglass 2.0" Strands | 2 Ounces | 4.50 |
| FG-CS1 | CFS1 | Cut Fiberglass set, one each of FG-C08, FG-C16 and FG-C32 | 10.75 | |
| FG-T1-20 | Fiberglass Cloth Tape, Woven Edges, 1" Wide x 20 Feet Long | 5.50 | ||
| FG-T2-20 | Fiberglass Cloth Tape, Woven Edges, 2" Wide x 20 Feet Long | 6.50 | ||
| FG-T3-20 | Fiberglass Cloth Tape, Woven Edges, 3" Wide x 20 Feet Long | 7.50 | ||
| FG-T4-20 | Fiberglass Cloth Tape, Woven Edges, 4" Wide x 20 Feet Long | 9.50 | ||
| FG-TS1 | Fiberglass Cloth Tape Set, Woven Edges, 1", 2", 3" & 4" Wide x 20 Feet Long | 21.75 | ||
| FIELD SUPPLIES | ||||
| FS-WA01 | Garden Hose Water Adapter for Running Your Water Cooled Engine at Home | 9.50 | ||
| FS-WV01 | Garden Hose Water Adapter w/Needle Valve f/Running Your Water Cooled Engine at Home | 17.75 | ||
| FS-FP1 | E/Z Fill Fuel Pump for Fueling Your Boat or Other Model | 14.75 | ||
| BUILDING SUPPLIES | ||||
| BS-ANT | Water Tight Car and Boat Antenna | 4.00 | ||
| BS-CR2-56 | #2-56 Control Rod, 12" Long, .072" Diameter, Threaded One End | 1.00 | ||
| BS-CR4-40 | #4-40 Control Rod, 12" Long, .093" Diameter, Threaded One End | 1.00 | ||
| BS-EZ2-56 | E/Z Connector for #2-56 Rod, Vertical Screw Adjustment, for stand up servo | (Qty. 2) | 2.50 | |
| BS-EZ4-40 | E/Z Connector for #4-40 Rod, Vertical Screw Adjustment, for stand up servo | (Qty. 2) | 2.50 | |
| BS-EZ2-56-RC | E/Z Connector for #2-56 Rod, Horizontal Screw Adjustment, for lay down servo | (Qty. 2) | 2.50 | |
| BS-EZ4-40-RC | E/Z Connector for #4-40 Rod, Horizontal Screw Adjustment, for lay down servo | (Qty. 2) | 2.50 | |
| BS-FF | In Tank Fuel Filter Clunk | 2.50 | ||
| BS-FKF | Kwik Fill Fueling Valve for Gasoline Only, Regular Size | 14.75 | ||
| BS-FKFL | Kwik Fill Fueling Valve for Gasoline Only, Large Size | 17.75 | ||
| BS-FLC2 | Fuel or Water Line Spring Clips, for 1/8" I.D. Tubing | (Qty. 4) | 1.50 | |
| BS-FT-DUB424 | Fuel Tank, 24 oz Square, DuBro, 2 1/2" High x 3 1/16" x 7 1/2" Lg., for Gas use order stopper BS-FT-GS | 5.50 | ||
| BS-FT-DUB690 | Fuel Tank, 32 oz Square, DuBro, 3" High x 3 11/16" x 7 3/4" Lg., Includes Gas & Glow Stoppers | 7.50 | ||
| BS-FT-GS | Gas Conversion Stopper For DuBro & Sullivan Fuel Tanks, For Gasoline | 1.50 | ||
| BS-FT-HOM1 | Fuel Tank, 24 oz Homelite with Cap, 2 3/4" High x 3" x 7 9/16" Lg, Neck Protrudes from End | 15.75 | ||
| BS-FT-MCC1 | Fuel Tank, 16oz McCulloch w/Cap, 2" High x 3 7/8" x 5 1/2" Lg, Neck Protrudes from Corner | 15.75 | ||
| BS-FT-MNT01 | Fuel Tank Mount for Homelite Fuel Tank to 5" Rails | call | ||
| BS-FT-MNT02 | Fuel Tank Mount for 16 oz Round Fuel Tank to 5" Rails | call | ||
| BS-FT-SULBT16 | Fuel Tank, 16 oz V-Type, Sullivan, 1 3/4" x 3 7/8" x 5 13/16", for Gas use order stopper BS-FT-GS | 6.50 | ||
| BS-FT-SULBT32 | Fuel Tank, 32 oz Special Large Type, Sullivan, 3" x 3 11/32" x 7 1/2", Includes Gas & Glow Stoppers | 7.50 | ||
| BS-FT-SULR-8 | Fuel Tank, 8 oz Round-Type, Sullivan, 2 5/16" O.D. x 4 3/16" Lg, for Gas use order stopper BS-FT-GS | 3.50 | ||
| BS-FT-SULR12 | Fuel Tank, 12 oz Round-Type, Sullivan, 2 1/2" O.D. x 5 5/8" Lg, for Gas use order stopper BS-FT-GS | 4.50 | ||
| BS-FT-SULR16 | Fuel Tank, 16 oz Round-Type, Sullivan, 3" O.D. x 5 1/2" Lg, for Gas use order stopper BS-FT-GS | 5.50 | ||
| BS-FT-SULSS-4 | Fuel Tank, 4 oz Slant-Type, Sullivan, 1 3/8" High x 2" x 3 1/2" Lg, for Gas use order BS-FT-GS | 3.50 | ||
| BS-FT-SULSS-8 | Fuel Tank, 8 oz Slant-Type, Sullivan, 1 7/8" High x 2 1/4" x 4 1/2" Lg, for Gas use order BS-FT-GS | 3.50 | ||
| BS-FT-SULSS12 | Fuel Tank, 12 oz Slant-Type, Sullivan, 2 1/8" High x 2 1/2" x 5" Lg, for Gas use order BS-FT-GS | 3.50 | ||
| BS-FT-SULSS16 | Fuel Tank, 16 oz Slant-Type, Sullivan, 2 5/16" High x 2 11/16" x 5 3/4" Lg, for Gas use order BS-FT-GS | 4.50 | ||
| BS-FT-SULSS24 | Fuel Tank, 24 oz Slant-Type, Sullivan, 2 3/8" High x 3" x 7 1/8" Lg, for Gas use order BS-FT-GS | 5.50 | ||
| BS-HL | Elastomeric Hatch Locking System | (Qty. 4) | 5.50 | |
| BS-LHT | Launch Handle, T-Style, Anodized Blue | 10.75 | ||
| BS-MRE2-56 | Marine Rod End #2-56 Thread, with Spacer & SS Mounting Hardware | 1.75 | ||
| BS-MRE4-40 | Marine Rod End #4-40 Thread, with Spacer & SS Mounting Hardware | 1.75 | ||
| BS-MRES02 | Marine Rod End Spacer for #2-56, 3/16" O.D. x 5/64" Tall, Brass, (Qty. 5) | 1.75 | ||
| BS-MRRE2-56 | Marine Replacement Rod End #2-56 Left or Right Hand Thread | (Qty. 2) | 1.75 | |
| BS-MRRE4-40 | Marine Replacement Rod End #4-40 or 3mm, Left or Right Hand Thread | (Qty. 2) | 1.75 | |
| BS-PS | Push Rod Seals With Mounting Hardware, Use with #2-56 or #4-40 Push Rods | (Qty. 2) | 3.00 | |
| BS-PSR | Push Rod Seals, Replacement Rubber Boots, Use with #2-56 or #4-40 Push Rods | (Qty. 2) | 2.50 | |
| BS-RB01 | Radio Box, Basic, Fits 5" Rails, Waterproof, Gasket, Clear Lid, Servo Tray, SS Hardware | 29.75 | ||
| BS-RB02 | Radio Box, Deluxe, Fits 5" Rails, As Above Plus: Pushrod Seals, Waterproof Switch Mount & Antenna | 39.75 | ||
| BS-RB03 | Radio Box, Basic f/7.2Volt, Fits 5" Rails, Waterproof, Gasket, Clear Lid, Servo Tray, SS Hardware | 29.75 | ||
| BS-RB04 | Radio Box, Deluxe7.2, Fits 5" Rails, As Above Plus: Pushrod Seals, Waterproof Switch Mount & Antenna | 39.75 | ||
| BS-SM | Universal Kwik-Switch Mount (For Receiver Switch) | 3.00 | ||
| BS-TAB108 | Trim Tab, 1 1/2" Wide X 1 3/4" Long, Adjustable Turnbuckle, (Plastic) | (Qty. 2) | 9.50 | |
| BS-TAB200 | Trim Tab, 2" Wide X 3" Long, Adjustable Turnbuckle, (Stainless Steel) | (Qty. 2) | 14.75 | |
| BS-TS2 | Silicon Tubing, 1/8" I.D. Blue, 3 Feet Lg, Used for Alcohol (Glow) Fuel Lines & Water Lines | 3.50 | ||
| BS-TT2 | Tygon Tubing, 1/8" I.D. Yellow, 3 Feet Long, Used for Gasoline Fuel Lines and Water Lines | 3.50 | ||
| BS-TV2 | Vinyl Tubing, 1/8" I.D. Clear, 5 Feet Long, Used for Water Lines Only | 3.50 | ||
| RADIO SUPPLIES | ||||
| RS-BC | Battery Connector mates to 7.2 Volt Battery pack | 3.00 | ||
| RS-RC | Receiver Connector for battery supply, large wires, Futaba 'J' Style Connection | 4.50 | ||
| RS-BP72-15 | Battery Pack, 7.2 Volt, 1,500 mAhr | 19.75 | ||
| RS-BP72-15K | Battery Pack, 7.2 Volt, 1,500 mAhr battery and 4 hour wall charger | 29.75 | ||
| RS-BP72-CHRG | Quick Charger for 7.2 Volt Battery Pack, Works from AC or DC Power Source | 29.75 | ||
| RS-FP2PB | Futaba 2 Channel Pistol Grip Radio, includes transmitter, receiver, 2 servos, switch and battery holder. | 70.00 | ||
| RS-FP2PC | Futaba 2 Channel Pistol Grip Radio, Magnum Sport, transmitter, receiver, 2 servos, switch & battery holder. | 75.00 | ||
| RS-FP3PJ | Futaba 3 Channel Pistol Grip, PCM, Programable-8 models, PCM receiver, 1 servo, switch & battery holder. | 400.00 | ||
| RS-FP3PJ-0 | Futaba 3 Channel Pistol Grip, PCM, Programable-8 models, PCM receiver, 0 servo, switch & battery holder. | 375.00 | ||
| RS-FS1 | Futaba FS-1 Fail Safe Unit, 'J' Style Connectors, Returns Throttle to Idle if Radio Signal is Lost | 59.75 | ||
| RS-RAM62 | Fail Safe Unit, Includes Connectors, Returns Throttle to Idle if Radio Signal is Lost | 24.75 | ||
| RS-SEJ | Servo Extension with Futaba 'J' Connectors | 5.50 | ||
| RS-SF132H | Servo, Futaba 132H, High Speed Mini, (25 oz in), 1.43" x .68" x 1.18" | 34.75 | ||
| RS-SFS9304 | Servo, Futaba 9304, Coreless BB, High Torque, Standard Size, (69.5 oz in), 1.59"x .79"x 1.4" | 54.75 | ||
| RS-SFS148 | Servo, Futaba S148, Precision Servo, (42 oz in), 1.59" x .77" x 1.41" | 16.75 | ||
| RS-SFS3003 | Servo, Futaba S3003, Standard Servo, (42 oz in), 1.59" x .77" x 1.41" | 12.75 | ||
| RS-SH525BB | Servo, Hitec 525BB, Ball Bearing, (46.2 oz in), 1.5" x 0.8" x 1.4" | 39.75 | ||
| RS-SH605BB | Servo, Hitec 605BB, Dual Ball Bearing, (77.0 oz in), 1.6" x 0.8" x 1.5" | 41.75 | ||
| RS-SH615MG | Servo, Hitec 615MG, Metal Gear, Dual Ball Bearing, (110.0 oz in), 1.6" x 0.8" x 1.5" | 59.75 | ||
| RS-SH700BB | Servo, Hitec 700BB, Ball Bearing, 1/4 Scale, (133 oz in), 2.3" x 1.1" x 2.0" | 34.75 | ||
| RS-SH705MG | Servo, Hitec Giant 705MG, Ball Bearing, Metal Gear, 1/4 Scale, (161 oz in), 2.3" x 1.1" x 2.0" | 47.75 | ||
| RS-SH805BB | Servo, Hitec Mega 805BB, Dual Ball Bearing, 1/4 Scale, (275 oz in), 2.6" x 1.2" x 2.25" | 54.75 | ||
| RS-SYH | Servo 'Y' Harness for 2 Servos on One Channel, Futaba 'J' Connectors | 7.50 | ||
| RS-SWLT | Locking Toggle Switch with Boot Kit | 11.75 | ||
| RS-SW1 | Stock Receiver Battery Switch, Futaba 'J' Style Connectors, with Charging Jack | 11.75 | ||
| RS-SW2 | Stock Receiver Battery Switch, Futaba 'J' Style Connectors | 5.50 | ||
| HARDWARE - FASTENERS, NUTS, SCREWS, WASHERS | ||||
| H-FW02 | Flat Washer, #2 x 1/4" O.D., Stainless Steel | Qty. 5 | 1.75 | |
| H-FW05F | Flat Washers, Fender #5 x 7/16" O.D., Stainless Steel (Fits #4-40 Machine & #6 Sheet Metal) | Qty. 5 | 1.75 | |
| H-FW08 | 1291 | Flat Washers, #8 x 3/8" O.D., Stainless Steel | Qty. 10 | 1.75 |
| H-FW08F | Flat Washer, Fender, #8 x 3/4" O.D., Stainless Steel | Qty. 5 | 1.75 | |
| H-SS08-02CS | Set Screws, #8-32 x 1/8" Long, Carbon Steel | Qty. 10 | 1.75 | |
| H-SS08-02SS | Set Screws, #8-32 x 1/8" Long, Stainless Steel | Qty. 10 | 1.75 | |
| H-SS08-03CS | 1300 | Set Screws, #8-32 x 3/16" Long, Carbon Steel | Qty. 10 | 1.75 |
| H-SS08-03SS | Set Screws, #8-32 x 3/16" Long, Stainless Steel | Qty. 10 | 1.75 | |
| H-SS08-04CS | Set Screws, #8-32 x 1/4" Long, Carbon Steel | Qty. 10 | 1.75 | |
| H-SS08-04SS | Set Screws, #8-32 x 1/4" Long, Stainless Steel | Qty. 10 | 1.75 | |
| H-FSH04-08 | Flat Socket Head Screw, #4-40 x 1/2" Long, Stainless Steel, (Countersunk) | Qty. 5 | 1.75 | |
| H-FSH04-10 | Flat Socket Head Screw, #4-40 x 5/8" Long, Stainless Steel, (Countersunk) | Qty. 5 | 1.75 | |
| H-FSH04-12 | Flat Socket Head Screw, #4-40 x 3/4" Long, Stainless Steel, (Countersunk) | Qty. 5 | 1.75 | |
| H-SHC02-08 | Socket Head Cap Screw, #2-56 x 1/2" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-SHC04-06 | Socket Head Cap Screw, #4-40 x 3/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-SHC04-08 | 1306 | Socket Head Cap Screw, #4-40 x 1/2" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC05-10 | 1305 | Socket Head Cap Screw, #5-40 x 5/8" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC06-06 | 1307 | Socket Head Cap Screw, #6-32 x 3/8" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC08-08 | 1311 | Socket Head Cap Screw, #8-32 x 1/2" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC08-10 | Socket Head Cap Screw, #8-32 x 5/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-SHC08-12 | 1308 | Socket Head Cap Screw, #8-32 x 3/4" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC08-14 | Socket Head Cap Screw, #8-32 x 7/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-SHC08-16 | 1309 | Socket Head Cap Screw, #8-32 x 1" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC08-20 | 1310 | Socket Head Cap Screw, #8-32 x 1 1/4" Long, Stainless Steel | Qty. 5 | 1.75 |
| H-SHC-4-06 | Socket Head Cap Screw, 1/4"-20 x 3/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-SHC3M-08 | Socket Head Cap Screw, 3-.50mm x 8mm Long, Stainless Steel | Qty. 2 | 1.75 | |
| H-SHC5M-40 | Socket Head Cap Screw, 5-.80mm x 40mm Long, Stainless Steel | Qty. 2 | 1.75 | |
| H-PPSMS02-06 | Pan Head Phillips Sheet Metal Screw, #2 x 3/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-TPSMS06-06 | Truss Head Phillips Sheet Metal Screw, #6 x 3/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-TPSMS06-10 | Truss Head Phillips Sheet Metal Screw, #6 x 5/8" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-TPSMS06-12 | Truss Head Phillips Sheet Metal Screw, #6 x 3/4" Long, Stainless Steel | Qty. 5 | 1.75 | |
| H-PSORMS08-10 | Pan Head Slotted O-Ring Seal Machine Screw, #8-32 x 5/8" Long, Stainless Steel | Qty. 1 | 1.75 | |
| H-NB-3 | 1359 | Brass Hex Nut, Small Profile, #10-32 | Qty. 2 | 1.75 |
| H-NYLN02 | Nyloc Shakeproof Nut, #2-56, Stainless Steel | Qty. 5 | 1.75 | |
| H-NYLN04 | Nyloc Shakeproof Nut, #4-40, Stainless Steel | Qty. 5 | 1.75 | |
| H-NYLN05 | 1360 | Nyloc Shakeproof Nut, #5-40, Stainless Steel | Qty. 5 | 1.75 |
| H-NYLN08 | 1357 | Nyloc Shakeproof Nut, #8-32, Stainless Steel | Qty. 5 | 1.75 |
| H-NYLN-4 | Nyloc Shakeproof Nut, 1/4"-20, Stainless Steel | Qty. 5 | 1.75 | |
| H-PN06 | Prop Nut #6-32 Flanged Shakeproof | Qty. 2 | 1.75 | |
| H-PN08 | Prop Nut #8-32 Flanged Shakeproof | Qty. 2 | 1.75 | |
| H-PN-3 | 1358 | Prop Nut #10-32 Flanged Shakeproof | Qty. 2 | 1.75 |
| H-PN-4 | Prop Nut 1/4"-28 Flanged Shakeproof | Qty. 2 | 1.75 | |
| BEARINGS, BUSHINGS & THRUST WASHERS | ||||
| B-NFB6 | 1200 | Nylon Flange Bushing 3/16" I.D. x 15/64" O.D. x 3/16" Long | Qty. 2 | 1.50 |
| B-OFB6-10-12 | Oilite Flange Bearing 3/16" I.D. x 5/16" O.D. x 3/8" Lg. (7/16" Flange O.D.) | Qty. 2 | 3.50 | |
| B-OFB6-10-16 | Oilite Flange Bearing 3/16" I.D. x 5/16" O.D. x 1/2" Lg. (7/16" Flange O.D.) | Qty. 2 | 3.50 | |
| B-OFB8-10-12 | Oilite Flange Bearing 1/4" I.D. x 5/16" O.D. x 3/8" Lg. (7/16" Flange O.D.) | Qty. 2 | 8.50 | |
| B-OFB8-10-16 | Oilite Flange Bearing 1/4" I.D. x 5/16" O.D. x 1/2" Lg. (7/16" Flange O.D.) | Qty. 2 | 8.50 | |
| B-OSB6-08-08 | 1185 | Oilite Sleeve Bearing 3/16" I.D. x 1/4" O.D. x 1/4" Lg. | Qty. 2 | 3.50 |
| B-OSB6-08-16 | 1186 | Oilite Sleeve Bearing 3/16" I.D. x 1/4" O.D. x 1/2" Lg. | Qty. 2 | 3.50 |
| B-OSB6-10-12 | 1187 | Oilite Sleeve Bearing 3/16" I.D. x 5/16" O.D. x 3/8" Lg. | Qty. 2 | 3.50 |
| B-OSB7-10-12 | 1188 | Oilite Sleeve Bearing 7/32" I.D. x 5/16" O.D. x 3/8" Lg. | Qty. 2 | 3.50 |
| B-OSB8-10-08 | Oilite Sleeve Bearing 1/4" I.D. x 5/16" O.D. x 1/4" Lg. | Qty. 2 | 3.50 | |
| B-OSB8-10-12 | Oilite Sleeve Bearing 1/4" I.D. x 5/16" O.D. x 3/8" Lg. | Qty. 2 | 3.50 | |
| B-OSB8-10-16 | Oilite Sleeve Bearing 1/4" I.D. x 5/16" O.D. x 1/2" Lg. | Qty. 2 | 3.50 | |
| B-OTW8-14-2 | Oilite Thrust Washer 1/4" I.D. x 7/16" O.D. x 1/16" Thick | Qty. 2 | 3.50 | |
| B-TFB6-10-16 | 1196 | Teflon Flange Bearing 3/16" I.D. x 5/16" O.D. x 1/2" Long | Qty. 2 | 3.50 |
| B-TFB7-10-16 | 1197 | Teflon Flange Bearing 7/32" I.D. x 5/16" O.D. x 1/2" Long | Qty. 2 | 3.50 |
| B-TSB6-08-12 | 1191 | Teflon Sleeve Bearing 3/16" I.D. x 1/4" O.D. x 3/8" Long | Qty. 2 | 3.50 |
| B-TSB7-10-12 | 1193 | Teflon Sleeve Bearing 7/32" I.D. x 5/16" O.D. x 3/8" Long | Qty. 2 | 3.50 |
| B-TTW6-12-2 | 1205 | Teflon Thrust Washer 3/16" I.D. x 3/8" O.D. x 1/16" Thick | Qty. 2 | 3.50 |
| B-TTW6-14-2 | 1206 | Teflon Thrust Washer 3/16" I.D. x 7/16" O.D. x 1/16" Thick | Qty. 2 | 3.50 |
| B-6201-P | Ball Bearing, Premium Quality, 6201 for Clutch Drum | Qty. 1 | 10.75 | |
| B-6201-S | Ball Bearing, Standard Quality, 6201 for Clutch Drum | Qty. 1 | 5.50 | |
| PIVOT PINS | ||||
| PP101 | 1250 | 1/8" O.D. x 1 1/16" Long, Stainless Steel | 3.50 | |
| PP104 | 1253 | 3/16" O.D. x 1 1/4" Long, Stainless Steel | 3.50 | |
| PP110 | 1251/1254 | 3/16" O.D. x 1 5/8" Long, Stainless Steel | 3.50 | |
| PP204 | 1252 | 3/16" O.D. x 2 1/4" Long, Stainless Steel | 3.50 | |
| HARDWARE KITS | ||||
| HK-01 | HK-01 | Hardware Kit f/Skegs, Parallel & Angle Struts, Customer to Countersink Holes in Skeg or Strut | 3.50 | |
| SPECIAL KITS | ||||
| SK-DUM007 | RBFT410-SWP rudder, pivot bracket, SS pivot pin, nylon flange bushings | 31.75 | ||
| SK-DUM008 | RBFT502-SWP rudder, pivot bracket, SS pivot pin, nylon flange bushings | 31.75 | ||
| SK-DUM010 | MRS Strut & T-Bracket, RBTF410-SWP rudder, pivot bracket, pivot pin, nylon flange bushings | 47.75 | ||
| SK-DUM011 | MRS Strut & T-Bracket, RBTF502-SWP rudder, pivot bracket, pivot pin, nylon flange bushings | 47.75 | ||
| SK-CBG010 | Running Hardware Kit for Gas Cracker Box | 59.75 | ||
| MARINE SPECIALTIES LOGOS, STICKERS & ATTIRE | ||||
| MS1365 | 1365 | Marine Specialties Patch | 5.00 | |
| MS1366 | 1366 | Marine Specialties Decals, 1 1/2" Diameter (slide off type transfer) | Qty. 5 | 3.75 |
| MS1367 | 1367 | Marine Specialties Monogrammed Cap, Logo with Flags | 19.75 | |
| MS-VL2-__ | VL2-__ | Marine Specialties vinyl stick on graphics (logo with flags, 3 3/8" wide x 1 7/8" tall) | Qty. 2 | 3.50 |
| MS-VL4-__ | VL4-__ | Marine Specialties vinyl stick on graphics (logo with flags, 7 1/2" wide x 4 1/4" tall) | Qty. 1 | 5.50 |
| Please Specify color desired for vinyl graphics: BK-Black, WT-White, RD-Red | ||||
| BU-Marine Pearl Blue, BB-Blueberry, YL-Yellow, FO-Fluoescent Orange, FP-Fluorescent Pink | ||||
| US Shipping and Handling | 7.50 | |||
| COD if Applicable | 7.50 | |||
| State Sales Tax if located in Texas | 8.25% | |||
| Our standard forms of payment are: Credit Card, Pre Payment with US Dollar Money Order, Wire Transfer or COD. International orders are subject to a 5% surcharge unless pre paid with a US dollar money order or wire transfer. International orders can not be shipped COD. | ||||
| Prices are subject to change without notice. Returns are subject to a restocking fee. All returns shall be unused, resaleable and in their original packaging. Return authorization shall be obtained prior to returning any items. | ||||
Ordering Information: Information for placing orders and terms and conditions of sales.
Order Form: Form you can print out and fax in.
For immediate help or to place
an order please write or call.
Marine Specialties
P.O. Box 19094
Houston, TX 77224-9094
713-468-6070 Phone
713-468-6072 Fax
Copyright © 1999 Marine Specialties. All Rights Reserved.
Users of this site agree to be bound by the terms and conditions of the Marine Specialties World Wide Web Site Terms and Conditions.
View Legal Waiver.
