|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
X
= PK is a Parking position. The presence or absence of this jumper has
no
effect on the drive. Labeling may indicate to place this jumper when
configuring as a slave. This is to provide for retention of the jumper
in the
event it is needed later.
Jumper Locations
The Fireball SE disk drive has only one location where user configurable
jumpers are found. The jumper block is incorporated into the IDE / ATA
cable connector. Using the jumper pins you can establish the drive
Master/Slave configuration.
BIOS Settings
The following BIOS parameters are provided for customers needing to
manually configure the Quantum disk drive. Both base 2 and base 10
capacity values are displayed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hard drives greater than 2.1GB may need to be divided into multiple
partitions / logical drives. MS-DOS versions 4.0 through 6.22 allow a
maximum primary partition / logical drive size of 2.1GB and are limited
to
8.4GB in physical drive capacity. The file systems supported by
Windows-95, Windows-98 and Windows NT are not restricted to the
8.4GB physical drive limit, but special BIOS support is required.
:
