Insectroïdes   |     home
Beetle robot tutorial   |    the Flag waver tutorial   |    tutorial de la Coccinelle   |   Tutorial on the Wall hugging mouse   |   Frisbee thrower   |   Herbie   |   tutorial of One motor walker   |   Servo modification   |   One motor walker tutorial   |   H-bridge   |   Waterproof a motor   |   Symet   |   YO-YO modification   |   Miller SE

Servo modification
In this page you are going to learn how to modify a servo motor for a total rotation.
Before starting, I suggest you to read the complete tutorials. This will greatly lower the chances of you making a mistake.
1 x servo motor
1 x Phillips screwdriver
1 x flat screwdriver
1 x cutter
1 x diagonal cutter
1 x soldering iron
1 x desoldering pump
1 x piece of tape

Put a piece of tape on the servo motor. Now the gear section won't fall apart.

Unscrew the four screw underneath  the servo.

Desolder the motor from the PC board.

©2000 Jérôme Demers. All rights reserved.