Extreme hu USW800 |
|
It refers to the eeprom image of a card.This unit can be used for a reader/writer H card unlooper or HU loader. |
'F' cards contained a Motorol68HC05SC21 microcontroller core with 6K bytes of ROM, 3K bytes of EEPROM, and 128 bytes of RAM.Can you use any access card to get all channels wide open?Opponents of the deal said it would create a monopoly in many areas, especially in rural places with no access to cable television.Experience: At least 3 years of organizational/administrative support experience in a large-scale, high-volume corporate, credit/collections, legal and/or consumer-oriented customer service environment. |
The second toy was one of the bootloaders for dtv black sunday cards, infact they sent me two different models they are experimenting with.Unplug receiver from the power outlet for 2 full hours Depending on the capacitors used in your receiver, this will ensure that RAM has been totally erased Plug the unit back in (with the card still in it) It should re-initialize correctly and begin to play on channel 100 If not, then you will need to wait about 20 hours on channel 100 for the FIRMWARE upgrade Then RESET by unplugging again on this channel, unless it comes back on The IMPORTANT THINGS to know are the following.It also has the ability to run on a 9v battery for that programmer on the fly.No modifications are required either to switch this puppy from Huloader to Flashable H card unlooper or even a phoenix style programmer. |
|