| Hash Fuze |
 |
| There is also a 9v power supply connection required for both emulation and for hughs receivers.Both sides of this unit are used. |
| These models do not have a RESET button Remove your access card from the receiver Select Menu Select Setup Select Installation Select System Test Press right arrow to BEGIN TEST When test is complete, USING THE REMOTE, press the CHANNEL UP key three times rapidly, followed by pressing CHANNEL DOWN twice (you must do this quickly) A new screen labeled SECRET SYSTEM TEST will appear Press both the ACTION and POWER buttons on the remote at the same time.Each IRD has a unique 4-byte ID number programmed into it at the factory, allowing DTV to send a command to whatever card happens to be in your decoder, if they know the decoder's ID number.I didn't change anything when I installed the program.This allow them some control should the card be compromised. |
| The computer portion of this emulation unit is about the size of a WhiteViper Programmer, and is clear smoke in color so you can see the internal workings of the unit.. |
|
