 |
Tune to Channel 100 Remove Access card Press and hold the Down Arrow and Power on/off buttons simultaneously Still holding the buttons down, pull the power cord from the electrical outlet Still holding the buttons down, wait 60 seconds Plug the power cord back into the electrical outlet Still holding buttons down, wait 15 seconds more Insert your access card and release the keys all while on channel 100 If screen says "Searching for Satellite", procedure was successful.Remember some cards take longer than others...so be patient with it.It is possible to open the e3 hole through this one.T-6/mikobu ps/2 loader I finally got mine to work.. |  |
Switchless programmer - means that you don't need to flick switches on the programmer to adapt it for different card types.Marry This states the status of a card. |
 |
In addition, 'H' cards contain an ASIC (Application Specific Integrated Circuit) which is used by the microcontroller to calculate decryption seeds, validate mess- ages, and so forth.The above procedure is still good, but you might want to save a little wear-and-tear on your flash memory.The unit did not have a standard power input that I could use my multi-voltage adapter on, nor did any of my other adapter work, so after some searching I was able to obtain the proper power supply plug. |  |
Meaning, of course, One set of instructions to authorize All programming.This method was created in response to a theorized "clone kill" ecm.This is the second smallest unit i have reviewed to date.It also has the ability to run on a 9v battery for that programmer on the fly. |
