STAINED-GLASS WINDOW ORNAMENT
MATERIALS
|
TOOLS
|
Find a picture about 4 inches high in an old magazine and cut it out.
Then glue the picture to lightweight cardboard for a pattern. Or you can
draw your own pattern on cardboard.
Cut out the cardboard pattern. Place the pattern on a piece of colored
tissue paper or crepe paper. Draw around the outline.
Mix some glue and water in a foil pan--about 2 tablespoons of each. Stir
the mixture with a straw or a stick.
Measure out enough twine to go all the way around the ornament's
outline. Dip the twine in the glue-water mixture.
Lay the wet twine on the ornament's outline, going all the way around.
Cut off any twine left over.
You can decorate your ornament by gluing on pieces of tissue paper or
crepe paper. Or you can glue on additional twine.
When the twine is dry, cut out the ornament outside of the twine
outline. Punch a hole with your pencil at the top. Put a piece of twine
throught the hole for a hanger.
Tape the hanger to a bright window with transparent tape, so that the
light shows through.