2. A projector machine lens (I couldent find a projector lens, so I used a small Pog case. If you dont remember what Pogs are, they where theese little round and flat pieces of cardboard with desighns on them. You would stack them up and use a "Slammer" to through down on the stack and you would try to knock down as many Pogs as you could from the stack. Anyway, They had little plastic cases to cary them in, I used one that screwed together with other Pog cases to make a rocket ship looking thing.

3. Two round peices of cardboard (They should be the same diameter as the bowls)

4. A round piece of wood (This goes inbetween the bowls. If you lay it down on one of your pieces of cardboard there should be one inch from the edge of the wood to the edge of the cardboard. If you take your projector lens (Or whatever eles you are useing) and lay it down sideways, it should be the same thickness as your piece of wood, use the smaller end of your projector lens to measure the thickness.

5. Hot glue and hot glue gun

6. Dark blue or light blue paint (I am not sure what color Cambot is, you dicide, I colored mine dark blue)

2. Take your cardboard circles and on the top of one of them, glue your wooden ring-type thing to it.

3. Now, glue the two circles of cardboard to the top of your bowls. (This should make it so if you wanted to put something in the bowl, you couldent. Becouse the cardboard circles are there)

4. Now take your projector lens and glue it in place to the bottom bowl . (Now you should have, the bottom bowl, with the lens, cardboard circle, and the wooden ring glued to it. And the top bowl, with the cardboard circle glued to it.)

5. Glue the top bowl to the wooden ring. And if you need to, put some glue on the projector lens to hold the top bowl on.

6. Cambot is done!!! This is indeed confusing, if you have any questionse-mail me