List of ITU-T Recommendations
concerning ATM
This list is provided for informational purposes only. No guarantee
as to its completeness or correctness. Also, although they are not formally
published, many of the following recommendations have been substantially
updated since first published.
ITU-T Recommendations Concerning ATM
-
E.164 Numbering plan for the ISDN era 11/91
-
G.707 Synchronous digital hierarchy bit rates 04/91
-
G.708 Network node interface for the synchronous digital hierarchy 06/92
-
G.709 Synchronous multiplexing structure 06/92
-
I.113 B-ISDN Vocabulary of Terms 04/91
-
I.121R Broadband Aspects Of ISDN 04/91
-
I.150 B-ISDN asynchronous transfer mode functional characteristics 06/92
-
I.211 B-ISDN service aspects 04/91
-
I.311 B-ISDN General Network aspects 06/92
-
I.321 B-ISDN protocol reference model and its application 04/91
-
I.327 B-ISDN functional architecture 04/91
-
I.361 B-ISDN ATM layer specification 06/92
-
I.362 B-ISDN ATM adaptation layer (AAL) functional description 04/91
-
I.363 B-ISDN ATM adaptation layer (AAL) specification (AAL1, AAL2, AAL3/4,
AAL5)
-
I.413 B-ISDN user-network interface 04/91
-
I.432 B-ISDN user-network interface - Physical layer specification 06/92
-
I.610 OAM principles of the B-ISDN access 06/92
Also, there are draft recommendations:
-
I.35B BISDN ATM Layer Cell Transfer Performance, 1992
-
I.364 Temp Doc 58 (XVIII) 'Support of Broadband Connectionless Data Service
on B-ISDN' 06/92
-
I.365.1 Frame Relaying Service Specific Convergence Sublayer (FR-SSCS)
06/93
-
I.371 Temp Doc 64 (XVIII) 'Traffic Control and Congestion Control in B-ISDN'
05/92
-
I.555 Frame Relaying Bearer Service Interworking 06/93
-
Q.2931 B-ISDN User-Network Interface Layer 3 Specification for Basic Call/Bearer
Control, 04/93
-
Q.931 ISDN user-network interface layer 3 specification for basic call
control 05/92
-
Q.933 Digital Subscriber Signalling Systems No. 1 (DSS 1) Signalling Specification
for Frame Mode Basic Call Control 05/92
-
G.804 Which describes the mapping of ATM cells into PDH links at 1.544,
2.048, 6.312, 34.368, 44.736, 97.728, 139.264 Mb/s (Jan 1993)
The following Q.SAAL documents are also germane:
-
Q.2100 "BISDN Signalling ATM Adaptation Layer Overview Description"
-
Q.2110 "BISDN Signalling ATM Adaptation Layer - Service Specific Connection
Oriented Protocol (SSCOP)
-
Q.2130 "BISDN Signalling ATM Adaptation Layer - Service Specific Coordination
Function for Support of Signalling at the User-to-Network Interface (SSCF
at UNI)"
And there are simply scads of BISDN Signalling draft Recommendations:
-
Q.2610 DSS2 & SS7 Use of cause and location in DSS2 and B-ISUP
-
Q.2650 DSS2 & SS7 Interworking of DSS2 and B-ISUP
-
Q.2660 SS7 Interworking of B-ISUP and Narrowband ISUP
-
Q.2730 SS7 Use of B-ISUP for Supplementary Services
-
Q.2761 SS7 Functional Description of B-ISUP
-
Q.2762 SS7 General Functions of B-ISUP messages and Parameters
-
Q.2763 SS7 B-ISUP Messages and Codes
-
Q.2764 SS7 B-ISUP Basic Call Procedures
-
Q.27BB SS7 B-ISUP for Point-to-Multipoint Calls
-
Q.27CC SS7 B-ISUP for Multiconnection Calls
-
Q.27DD SS7 Network Look-Ahead
-
Q.27EE SS7 B-ISUP Connection Modification
-
Q.27FF SS7 B-ISUP for Additional Traffic Types
-
Q.27GG SS7 B-ISUP Negotiation During Call Setup
-
Q.2931 DSS2 access signalling for BISDN
-
Q.2932 DSS2 generic functional protocol for supplementary svces
-
Q.2933 DSS2 signalling for interworking with frame relay
-
Q.293x DSS2 signalling overview document
-
Q.2951 DSS2 number identification supplementary svces
-
Q.2957 DSS2 additional information transfer supp svces
-
Q.2961 DSS2 traffic parameter negotiation capability
-
Q.2962 DSS2 bandwidth negotiation capability
-
Q.2963 DSS2 bandwidth modification capability
-
Q.2964 DSS2 Look Ahead feature
-
Q.2971 DSS2 point to multipoint control
-
Q.298x DSS2 multiconnection control
-
Q.29xx DSS2 multilevel priority capability