BAND-IT TIRE SEALANTBAND-IT TIRE SEALANT
Eliminates tire porosity which allows pressurized air to bleed off through the tireStops the bead (Wheel-rim leaks)All weather protectionStops slow leaks (The most difficult tire problem to rectify)Instantly seals and makes the permanent repair to punctures caused by foreign objects which pierce the tire treadMaintains correct tire pressure. Eliminates under inflated tiresGUARANTEED to last for the legal life of the tire!This exceptional product combines an ethylene-glycol based solution with natural fibres, artificial fibres, adhesion agents, corrosion inhibitors and other solids. It is designed to keep the fibres and solids in constant suspension. Because there is no setting of the solids and fibres, BAND-IT is always ready to work for you. No mixing, stirring or other preparation is necessary. The adhesion properties in BAND-IT TM coupled with the fact that it remains fluid when installed in the tire provides constant protection for all parts of the tire.
A specific amount of BAND-IT TM is pumped into your wheel where it remains liquid for the life of the tire. As the tire rotates the product is evenly spread over all of the inner surfaces of the tire and wheel rim. When a puncture or lead occurs BAND-IT TM immediately forms a plug made of thousands of interlocking fibres which seals the hole, instantly cures and makes a permanent roadworthy repair.
BAND-IT TM eliminates slow leaks, bead leaks, and porosity air loss, which are the major causes of underinflated tires. Underinflated tires result in rolling resistance and increased fuel consumption, they run hotter and wear faster. Hot tires are much less resistant to punctures and other road damage.
Consider the Facts:
5 LBS. UNDERINFLATION REDUCES TIRE LIFE BY 28%
6 LBS. UNDERINFLATION REDUCES TIRE LIFE BY 35%
9 LBS. UNDERINFLATION REDUCES TIRE LIFE BY 52%
BAND-IT TM will not repair damage to sidewall or crown or excessive damage caused by vandalism or malicious destruction.
Tires may be washed out and the casing recapped without any extra preparation or expense. BAND-IT TM Flat-Proof will not stain clothing, is not flammable, and is odourless.
BAND-IT TM Flat-Proof contains a rust inhibitor, which will not rust rims, valve stems, or steel belts on passenger or commercial tires.
BAND-IT TM FLAT-PROOF WILL NOT AFFECT WARRANTIES ON THE TIRES OR WHEELS.
BAND-IT TM on road tire sealant is a sophisticated high-tech product which instantly and permanently seals tire punctures up to ¼" in diameter. Don t wait for puncture to occur, install BAND-IT TM as a preventative measure BEFORE you find yourself stranded and in trouble with a flat tire.
BAND-IT TM will not ball up, will not cause vibration, or affect the balance of your tires ever. However, the tire must be in balance prior to the installation of the BAND-IT TM Flat Proof. Many punctures occur without the cause of damage being found. BAND-IT TM WILL SEAL THE HOLE WHILE YOU ARE driving AND YOU WILL NEVER KNOW YOU HAD A PUNCTURE. If you should find a nail or other foreign object in the tread of your tire, remove it and roll the vehicle forward immediately to seal the puncture. THAT S ALL IT TAKES TO DO THE JOB.
BAND-IT TM Flat-Proof is a tire life enhancer which instantly seals punctures up to 3/8" in diameter. It is a preventative measure to use before you get into trouble (a flat tire). The other tire repair products on the market are "after-the fact" products.
BAND-IT TM is a scientifically developed preventative maintenance chemical product made for commercial and industrial tires that are subjected to hard heavy use.
BAND-IT TM will virtually eliminate flat tires from tread punctures or other leaks.
BAND-IT TM properly installed in a tire will provide full protection against air loss for the life of a tire.
BAND-IT TM also extends tire life by dissipating heat. Heat in a tire reduces tread life, and because rubber is a poor conductor of heat, the friction between the tread and the road tends to stay in the tread area. BAND-IT TM carries that tread heat across the tire into the sidewall and the rim. As much as 30% of the tire heat build-up is reduced. The material is also water soluble for easy clean-up when changing tires.
BAND-IT TM contains millions of small fibres suspended in a carefully engineered formula that also includes a rust-inhibitor, a rubber preservative and a freeze-protection fluid. The material will not deteriorate the rubber in the tire.
BAND-IT TM is pumped into the tires through the valve stem after the valve core has been removed. The tire is then re-inflated according to the tire manufacturers pressure. No maintenance is necessary except a weekly check for nails or debris.
The massive savings possible with BAND-IT TM have been demonstrated in a yearlong test at a cargo container shipping yard where company trucks had been averaging 5800 flat tires a year. Application of $7665.00 in sealant material resulted in a time and labor savings estimated at $62,993.00