|
What you need to fit neo key.
1 x 12C508 chip
1 x USB cable
1 x 1mF 63v capacitor
1 x PS2 console
Program your 12C508 chip with the 750x.hex download
Grab yourself a USB cable, and chop it in half. We are using the 'large' computer fitting end.
Cut back the insulation and metal braid protection, and you will find:
1 x red wire (+5v)
1 x Black wire (GND)
1 x Green wire (+Data)
1 x White wire (-Data)
Strip back the insulation from the red, black and green wire and tint.
Solder the red wire to PIN 1 of the chip. (you can put a switch inline here in order to switch the chip off)
Solder the black wire to PIN 8 of the chip.
Solder the +'ve end of the capacitor to PIN 6 of the chip, and the green wire to the -'ve of the capacitor.
Open your console, and add a jumper wire to the points shown in pictures provided.
Plug your new external USB mod into your PS2 (into the correct USB slot), and now you can play:
Original PSX games from your region(mod switched off or removed)
Original PS2 games from your region
Copy PSX games from your region with a normal boot with mod on
Copy PS2 games from your region with AR2 (normal boot method)
EA method not supported patch with addzero for ea-games
HOW TO USE YOUR PS2KEY
ACTION REPLAY
Turn on PS2
Insert CD
Once CD has booted
Select start game
Without Codes
Insert PS2Key into top USB port
Open tray
Swap disk
Close tray
Wait 4 seconds and press x
Remove PS2Key after 5 seconds
XTREME FM
Turn on PS2
Insert CD
Once CD has booted
Select play game
Insert PS2Key into top USB port
Open tray
Swap disk
Close tray
Wait 4 seconds and press x
Remove PS2Key after 5 seconds
To play a PSX backup insert PS2Key turn on PS2 any insert the CD.
click here to download NEOKEY.HEX Playstation v3 |
