|
| 4-30-06 |
|
| 4/16/05 |
|
| weighting down the fabric to glue it to the bottom of the wing.. |
| 01/16/06 |
|
Getting ready to rib lace the wing.
|
| dry fitting the ribs to the spars |
|
| All these parts are starting to look like something that goes on an airplane. |
|
| Nose ribs made on a router table from a pattern, 1/4x1/4 to be glued to them |
|
| #1 rib with holes cut for the wing attach straps |
|
| Waiting for the leading edge to be installed. The trailing edge and aileron spar is installed. |
Wrapping the leading edge.
|
| I used these motorcycle straps to tighten the ply instead of twine.It worked out very nice. |
|
| Don't forget to attach your strut fittings before putting the last pice of ply on your leading edge! |
|
