Calculation For plain-milling

Raw Material which is being machined: ............................... Machine Steel Tool Steel Cast Iron Bronze Aluminum

The size of the material being cut off
Width(w) : mm
Depth(dom) : mm

please select the material of the cutter: .............. High speed steel Carbide

Please choose the diameter of the cutter(D): .............. 37.5--47.5mm 47.5--60mm 60--67mm 67--75mm

According to your information, the recommended diameter(D)for the chosen range is:mm,and you need cuts to meet the requirement with the selected cutter.

The cutting speed(CS)is:m/min

Revolving speed of the cutter(rs = 320 * CS / D):r/min

The number of teeth on the cutter(N):teeth

The chip per tooth(cpt):mm

The feed on the milling machine(feed = N * cpt * rs / 60):mm/sec

The energy required for milling for the chosen raw-material(E)is:J/mm^3

The depth of cut(d)is:mm

The width of cut(w)is:mm

The power(P = Feed * d * w * E / 1000)required to drive the machine is:KW