|
|
| Clamping left front "Fender" block in place |
|
| The "Little" Blue one is 1/8 scale! |
|
| Adding Upper Nose Detail |
|
| Rear Bumper Fairings |
|
| Rear Bumpers Shaped & Added |
|
| Shaping Up! |
|
| Closer all the time. |
|
| Rear Bumpers trial fitted & gas Opening finished |
|
| Hogged out the spot for the front fender inserts |
|
| Door Glass area carved out |
|
| Same "Metalizer" on the front bumpers |
|
| "Vents" on the right side. Note the door "Openings" are cut in |
|
| Side view in Primer |
|
| Showing rear deck detail |
|
| Second primer coat |
|
| Two more filled, ran out of material, Bummer! |
|
| Here the clay has been removed from both molds |
|
| two part Silicon Molds for the Bumpers |
|
| Finished Right rear bumper mold in the rear, the Bumper "Plug" in the center and a Cast bumper out o |
Check the Back Corner often, as more pictures
will be added !
CLICK:
FOR MORE PAGES!
|
 |
|
|
|
| Carving the front fenders |
|
| Clamps removed after gluing |
|
| Park Light Fairings added |
|
| We have a Hood! |
|
| That Tiny one on top is 1/25 scale! |
|
| Front Bumpers ready to finish shaping |
|
| Aluminium Park Light Lens & Bezel Patterns |
|
| Rear Split Window Roughed in |
|
| Front Bumpers Hung on |
|
| Insert patterns in place |
|
| Da Udder Side |
|
| Right side jacked up |
|
| Adding "Vents" to the left side of the top |
|
| Filler added to base of windshield above the cowl screen |
|
| Hood opening filled in getting ready to prime. |
|
| 3/4 View in primer |
|
| Sanded with 320 Grit |
|
| Reshaped upper Door area under the windows for a more Scale appearance |
|
| Finally got enough silicon rubber to finish the bumper molds! (12-20-02) |
|
|
|
|
|
|
| Finished carving fenders |
|
| Adding rear Upper Fenders to rear Clip |
|
| Rear Upper Deck filled in |
|
| Clamping "Nose" Detail |
|
| Windshield added, Ready to carve |
|
| Top is close & Front Bumpers Fit! |
|
| All four Bumpers ready for Metalizer |
|
| Tail light lens pattern |
|
| Inserts remoced leaving the correct shape, just has to be finished sanded |
|
| Rear clip all sanded and ready for primer |
|
| Rear Bumpers "Metalized" Ready to "Bolt " on |
|
| Working on the cowl area |
|
| All sanded and ready to prime! |
|
| Showing cowl screen detail |
|
| Rear view all sanded |
|
| Ready to rework window area |
|
| Bumpers in their Mold Boxes. The lower left one has been filled with Silicon Mold material. |
|
| The one in front is cleaned of molding clay the rear one is just as removed from mold "Box". |
|
|
|
|
|
