Engineering & Equipment Co.

De-Bead

Bead Remover Video
No Audio

NOTE: The "Load time" of the Video requires 7-15 min. to appear.
High Speed (DSL)= 5 min.
56K Modem =15 min.
Please wait.


REMOVE THE BEAD QUICKLY AND EASILY WITH THE TIRE SIDEWALL BEAD REMOVER TO:
PRE-PROCESS PRIOR TO SHREDDING/GRINDING FOR A 100% WIRE FREE PRODUCT
MAKE RECYCLED PRODCTS FROM THE PIECES


FEATURES OF THE BEAD REMOVER.

* AVERAGE PRODUCTION RATE
OF 6 SIDEWALLS PER MINUTE
* EASY TO OPERATE
* LOW COST, EASILY REPLACEABLE BLADES
* 1 1/2 HP, 110 VOLT
SINGLE PHASE AC MOTOR
* 100 PSI AIR COMPRESSOR REQUIRED
* CUTS CAR AND
LIGHT TRUCK TIRES
* PORTABLE (250 LBS)
* SMALL FLOOR SPACE (32” X 40”)
* PRICE $3250.00 Plus Shipping

TIRE SIDEWALL BEAD REMOVER
The bead remover quickly removes the bead from sidewalls that have been separated from the tire with the sidewall remover. The machine is semi-automatic - simply place the sidewall over the upper roller and press the air button. The bead will then be cut from the sidewall at approximately 1 inch from the inside diameter of the bead. When the cut is complete, the button is released and the pieces can be removed. Production matches the sidewall remover with a rate of 6 sidewalls per minute. The blades are standard utility knife blades (extra heavy duty) that cost approximately $23.00 per box of 100 blades. Blade life is approximately 400-600 sidewalls per blade. The blade can be changed in a matter of seconds by simply loosening two bolts, slide out the old blade, slide in the new blade, and then retighten the bolts. The only maintenance required is to lubricate the drive chain and several grease fittings regularly. All parts are available from EECO, however, most of the common wear parts (sprockets, chain, bearings, etc.) are standard “off-the-shelf” parts and are typically available locally which allows for quick repairs.


GO TO
Tread Cutter
Sidewall Cutter
Mini Tracked

Return to Home Page.


Webmaster.
Updated 02-2007