MY REPLICA & SPECIAL PARTS
[Page 5 of 7]


Home

Site Map

Bulletin Board My Replica & Special Parts FAQ Outfits Dealers of My Parts

Model Gallery

CAM Exhibition

Madrid Exhibition

India page

 

Please note: Stg£ prices are ~ 0.83 time US$ prices.
                     Euro
prices are ~ 0.91 time US$ prices.

But for prices of individual parts, please download the full spreadsheet catalogue listing all prices in US$, Stg£ and Euro

BRASSWARE

ITEM # DESCRIPTION SPECIFICATIONS PRICE US$
59 Collar 2h 0.85
59b Collar 3h 1.41
59m Eccentric Collar 3/8" x 3/8": 1/8" off-set 1.42
59c Ball Grip 1/2'' Ø One plain and one tapped bore at 90º 6.16
59d Square Collar ½"x ½"x ¼": 4-way tapped 2.49
59n Threaded Cube ½"x ½"x ½": 6-way tapped for corner joints 3.63
140y Collar 4h 1.22
59a Aero Collar 2h 0.84
63d Short Coupling 2 bores 3.23
63 Coupling 3 bores 4.16
63a Octagonal Coupling 3 bores 8.01
63e Narrow Coupling 5/16'' Ø 3 bores 4.84
63f Long Coupling 4 bores 5.51
63g Long Coupling 5 bores 6.90
63c Threaded Coupling - 4.25
64a Short Threaded Coupling - 3.26
63b Strip Coupling - 5.60
63h Rectangular Coupling 1/2"x1/2"x13/16"  :    3 bores 5.04
63j Rectangular Coupling 1/2"x1/2"x1-15/16" : 7 bores 11.83
63s Screwed Rod Coupling Hex X-Section x 3/8'' 1.27
179 Rod Socket - 2.84
179a Pivot Rod Socket 5/16" Ø 3.32
173a Screwed Rod Adapter - 2.86
136 Handrail Support - 3.48
136a Handrail Coupling - 3.50
136b Handrail Coupling Threaded base 3.96
144 Dog Clutch - 7.65
171a Short Socket Coupling 2mm wide groove 7.12
171 Socket Coupling - 8.08
174 Grease Cup - 4.87
64 Threaded Boss - 2.11
140M Universal Joint Märklin type 16.48
140a Constant Velocity Joint 4 sliding balls in ball/socket assembly 13.88
123 Cone Pulley Fully turned 15.42
20d Flanged Wheel 1/2'' Ø 4.12
20e Flanged Wheel w/o boss 1/2'' Ø 2.39
20b Flanged Wheel 3/4''Ø - fully turned 6.84
20 Flanged Wheel 1-1/8'' Ø - fully turned 9.24
20g Flanged Wheel no boss 1-1/8'' 9.16
20f Roller for turntable 3/8'' Ø x 5/8'' 3.66

The Pivot Rod Socket 179a converts any standard axle rod to a Pivot Rod

The CV Joint 140a has lateral freedom of 1/4" and axial offset angle of ± 30º

The 1-1/8"Flanged Wheel w/o boss 20g allows construction of realistic crane bogie wheels

BRASS SPACERS


The Spacers are 3/8" o.d. and are available in TWO different forms and functions:

(a)  Tapped through longitudinally at both ends

(b) Drilled throughout to standard axle rod clearance, cross-tapped at both ends [except 59eD]. A set of three 3'' lengths is ideally suited to act as rollers in plate-rolling mechanisms.

Please specify your choice when submitting your wants list, by suffixing T or  D to the Item #!

 

ITEM # LENGTH PRICE US$
59e 1/2'' 1.30
59f 1'' 2.28
59g 1-1/2'' 3.28
59h 2'' 4.26
59j 2-1/2'' 5.25
59k 3'' 6.25

 

BRASS SPUR PINIONS

ITEM # TEETH FACE MESH AT STANDARD SPACING WITH PRICE US$
25m 10 1/8'' 30t Pinion - 66t Gear 4.37
26m 10 1/4'' 30t Pinion - 66t Gear 4.77
25n 11 1/8'' 26t Pinion - 66t Gear 5.22
26n 11 1/4'' 26t Pinion - 66t Gear 5.70
25r 13 1/8'' 26t Pinion - 65t Gear 6.44
26r 13 1/4'' 26t Pinion - 65t Gear 7.27
25c 15 1/8'' 22t Pinion - 60t Gear 4.98
26c 15 1/4'' 22t Pinion - 60t Gear 5.44
26d 15 1/2'' 22t Pinion - 60t Gear 7.72
26e 15 3/4'' 22t Pinion - 60t Gear 9.33
25g 16 1/8'' 22t & 24t Pinion - 60t Gear 5.30
26g 16 1/4'' 22t & 24t Pinion - 60t Gear 6.04
25h 17 1/8'' 20t Pinion - 50t Gear 5.66
26h 17 1/4'' 20t Pinion - 50t Gear 6.45
25u 19 1/8'' 19t Pinion - 57t Gear 5.81
26 19 1/4'' 19t Pinion - 57t Gear 5.59
26a 19 1/2'' 19t Pinion - 57t Gear 7.78
26b 19 3/4'' 19t Pinion - 57t Gear 9.40
25l 20 1/8'' 17t Pinion - 56t Gear 6.62
26l 20 1/4'' 17t Pinion - 56t Gear 7.57
25f 22 1/8'' 15t & 16t Pinion - 55t Gear 7.34
26f 22 1/4'' 15t & 16t Pinion - 55t Gear 8.39
25p 24 1/8'' 15t & 16t Pinion 7.96
26p 24 1/4'' 15t & 16t Pinion 9.13
25v 25 1/8'' 13t Pinion - 50t Gear 8.31
25 25 1/4'' 13t Pinion - 50t Gear 8.70
25a 25 1/2'' 13t Pinion - 50t Gear 10.24
25b 25 3/4'' 13t Pinion - 50t Gear 12.17
25q 26 1/8'' 13t Pinion - 50t Gear 8.66
26q 26 1/4'' 13t Pinion - 50t Gear 9.92
25s 27 1/8'' 10t & 11t Pinion - 50t Gear 9.05
26s 27 1/4'' 10t & 11t Pinion - 50t Gear 10.34
25t 28 1/8'' 10t & 28t Pinion - 50t Gear 9.60
26t 28 1/4'' 10t & 28t Pinion - 50t Gear 10.99
25k 30 1/8'' 10t Pinion - 45t Gear 10.04
26k 30 1/4'' 10t Pinion - 45t Gear 11.53

 

MULTI-PURPOSE GEAR

ITEM # DESCRIPTION TEETH

PCD

PRICE US$

FINISH

27f Plastic gear with brass boss 14 1'' 1.96

 

BRASS SPUR GEARS

ITEM # TEETH FACE MESH AT STANDARD SPACING WITH PRICE US$
31 38 1/4'' 38t, 76t & 152t Gears 12.56
31a 38 2mm 38t, 76t & 152t Gears 11.76
31b 38 1/8'' 38t, 76t & 152t Gears 12.01
27g 45 2mm 30t Pinion 12.48
27 50 2mm 25t & 26t Pinions 12.28
27e 55 2mm 22t Pinion 14.13
27j 56 2mm 19t & 20t Pinions 14.13
27a 57 2mm 19t & 20t Pinions 13.88
27d 60 2mm 15t & 16t Pinions 14.41
27k 65 2mm 11t & 13t Pinions 16.26
27h 66 2mm 10t & 11t Pinions 16.34
27t 70 2mm 25t & 7t Pinions 16.65

 

STEEL SPUR GEARS

ITEM # TEETH FACE MESHES AT STANDARD SPACING WITH REMARKS PRICE US$
26z 7 1/4'' 70t Gear With Axle Rod Ø tailshaft  [Blackodized Steel] 3.79
27m 76 1/16'' 38t Gears - 14.46
27c 95 1/16'' 19t Pinion - 15.08
27b 133 1/16'' 19t Pinion 4 tapped holes 19.70
27n 133 1/16'' 19t Pinion No boss 18.77
27p 152 1/16'' 38t Gears 4 tapped holes 26.12
27q 152 1/16'' 38t Gears No Boss 25.21
27r 171 1/16'' 19t Pinion 4 tapped holes 29.46
27s 171 1/16'' 19t Pinion No boss 29.46

 

WORMS

ITEM # SIZE SPECIFICATION PRICE US$
32 Standard Right hand ® \\ 5.03
32a Standard Left hand  ¬ // 5.84
32b Narrow Meshes with 60t gear 5.98
32c Short 11/16" long - 4 pitch 4.99
32d Wide Meshes with 50t gear 8.29

 

MULTI-START WORM & WORM WHEEL

ITEM # DESCRIPTION TEETH

PCD

PRICE US$
211y 5-start Worm [reversible] 5-pitch 7/8'' 51.51
211z Worm wheel 80 2-1/8''

To view images of the above pair, click here

 

RATCHET WHEELS

ITEM # DESCRIPTION TEETH

PCD

PRICE US$
148 Ratchet Wheel RH 20 5/8'' 9.19
148a Ratchet Wheel LH 20 5/8'' 9.19
148b Ratchet Wheel w/o boss 15 2'' 17.41
148c Ratchet Wheel w/o boss 30 2" 17.55

 

RACK STRIPS

ITEM # LENGTH TEETH PRICE US$
110 3-1/2'' 42 2.90
110a 6-1/2'' 78 5.15
110b 12-1/2'' 150 10.13

 

STANDARD BEVEL GEARS

ITEM # TEETH HOLES MESHES WITH PRICE US$
30j 12 - 24t Bevel 30k 7.40
30m 12 - 36t Bevel 30n 7.40
30a 16 - 48t Bevel 30c 7.63
30e 21 - 42t Bevel 30f 10.51
30k 24 - 12t Bevel 30j 12.13
30 26 - 26t Bevel - All 45º Bevels 12.37
30n 36 - 12t Bevel 30m 19.46
30f 42 - 21t Bevel 30e 21.46
30c 48 8 16t Bevel 30a 22.68

 

45º BEVEL GEARS

These Bevel Gears mesh with each other and also with the standard 26t Bevel Gear

ITEM # TEETH PRICE US$
30g 12 7.43
30h 16 7.58
30b 24 12.10
30l 48 22.77

 

CONTRATE GEARS

Contrate Gears are machined from solid brass with integral boss

ITEM # TEETH PRICE US$
29a 19 7.37
29 25 7.95
28 50 15.93

 

HELICAL GEARS

All Helical Gears are available in both Right and Left hand configurations

ITEM # TEETH HOLES PRICE US$
211c 10 - 6.54
211d 12 - 7.77
211a 14 - 9.10
211e 16 - 10.60
211f 20 - 13.19
211g 24 - 15.86
211h 30 - 19.91
211k 32 - 21.287
211b 35 6 23.23
211m 36 6 24.04
211n 40 6 26.86
211p 48 8 28.79
211q 60 8/12 36.65

N.B! PLEASE ADD SUFFIX 'L' TO SPECIFY LEFT-HANDED HELICAL GEARS
Note: All Helicals 35t and above have their faces hollowed out keeping the tooth thickness unchanged at 1/4"

 

GEAR RINGS

ITEM #

TEETH

PCD

PRICE US$

OUTER

INNER

OUTER INNER
180a 95 57 2-1/2'' 1-1/2'' 38.56
180 133 95 3-1/2'' 2-1/2'' 51.42
180b 171 133 4-1/2'' 3-1/2'' 60.65
180c 152 - 4'' 2-1/2'' 27.90
180d - 57 2-1/2'' 1-1/2'' 23.15
180e - 95 3-1/2'' 2-1/2'' 29.63
180f - 133 4-1/2'' 3-1/2'' 33.53

 

TOOTHED SEGMENTS & COMPATIBLES

ITEM #

DESCRIPTION

PCD/LENGTH

TEETH

REMARKS

PRICE US$

FINISH

129

Rack Segment

3'' 114 [nominal] Set of 4 17.50
129a

Contrate Segment

2-1/2'' 96 Set of 4 36.12 Brass
167aQ

Large Tooth Quadrant 

 10-1/2" / 6-3/4''  168 / 108 Set of 4 80.88
167c

Pinion for 167aQ

1" 16 - 13.59 Brass
167d

Pinion for 167aQ

1/2'' 8 - 9.78 Brass
167g

Worm for 167aQ

- 4-pitch 1-start 15.86 Brass
167h

Worm for 167aQ

- 4-pitch 2-start 18.68 Brass
167e Rack Strip 6-1/2'' 32 - 6.49
167f Rack Strip 12-1/2'' 62 - 12.89
167r GRB annulus 12'' 192 5-1/2'' i.d. 156.17

Both 129 and 129a have the segments numbered 1-2-3-4 for sequential fitment on a base plate.

 

SPROCKET WHEELS & CHAIN

ITEM # DESCRIPTION LENGTH PRICE US$

FINISHES AVAILABLE

94 Sprocket Chain 40'' 20.30 Stainless Steel
ITEM # PCD TEETH PRICE US$ FINISH
96a 3/4'' 14 4.00
96 1'' 18 4.08
95a 1-1/2'' 28 5.10
95 2'' 36 6.70
95b 3'' 56 8.26

For Sprocket Wheels suitable for 5/16'' Axles see on P6 under Heavy Axle Components

 

LARGE TOOTHED PARTS [20 DP]

ITEM # DESCRIPTION TEETH PCD/LENGTH REMARKS PRICE US$
1101 Pinion 20 1'' Hollowed out - Brass 11.29
1101a Pinion 10 1/2'' Brass 8.17
1102 Worm 4-pitch 1'' Hollowed out - Brass 12.63
1103 Gear Wheel 80t 4'' 4 tapped holes in 1/2''Ø boss 20.27
1103a Gear Wheel 50t 2-1/2'' 4 tapped holes in 1/2''Ø boss 13.92
1104 Toothed Disc 80t 4'' - 18.40
1105 Toothed Ring 80t 4'' - 2-1/2'' Sits on a 3-1/2'' Circular Girder/Strip 19.05
1105a Toothed Ring 110t 5-1/2" - 4-1/2'' Sits on a 5-1/2'' Circular Girder/Strip 27.36
1106 Toothed Ring 120t 6'' - 4-1/2'' Sits on a 5-1/2'' Circular Girder/Strip 30.13
1106a Toothed Ring 150t 7-1/2" - 6-1/2'' Sits on a 7-1/2'' Circular Girder/Strip 43.08
1107 Toothed Ring 160t 8'' - 6-1/2'' Sits on a 7-1/2'' Circular Girder/Strip 47.40
1108 Spoked Gear Disc 120t 6'' Hub Disc pattern face 37.78
1109 Rack Strip 41t 6-1/2'' - 6.58
1109a Rack Strip 78t 12-1/2" - 13.19
1110 Gear Ring 50t 3-1/2'' - 2-1/2" Only internal teeth 19.12
1111 Toothed Circular Girder 66t 3-1/2''Ø - 32.68
1112 Toothed Hub Disc 102t 5-1/2'' Ø - 49.66

 

BALL THRUST BEARINGS

ITEM #

DESCRIPTION

Ø / TEETH REMARKS PRICE US$

FINISHES

23T Miniature Thrust Bearing 3/4''

23r+2x38d+6x168f

5.32

-
23r Pulley without boss 3/4''

6 holes

4.76

Brass

38d Washer [Pack of 10] 3/4''

-

1.45

168f Ball 5/32''

Pack of 12

0.65

-
 

168 Ball Thrust Bearing complete 4''

Sprocket-teeth

38.06
168S Ball Thrust Bearing complete 4''

20 DP Gear teeth

40.03
168a Ball Bearing Flanged Disc 3-3/4'' - 8.65
168b Ball Bearing Toothed Disc 4''/73t Sprocket teeth 16.87
168bS Ball Bearing Toothed Disc 4'' / 80t 20 DP Gear Teeth 18.95
168c Ball Cage with Balls - 12 Balls 14.50

Stainless steel

 
168d Ball 3/8'' - 0.33

-

 
168L Ball Thrust Bearing complete 6'' - 62.12
168aL Ball Bearing Flanged Disc 5-3/4'' - 12.19
168bL Ball Bearing Toothed Disc 6'' / 120t 20 DP 30.49
168cL Ball Cage with Balls - 20 Balls 24.23

previous                                                 next

Send me an e-mailE-Mail

This page last updated on Monday, 25 December 2017